Floor-standing gas boilers Baxi SLIM i, iN, Fi, FiN, HP
What is the difference between boiler models with the designations i, Fi, iN, FiN?
First digit:
1
- single-circuit boiler for heating only
2
- double-circuit boiler for heating and hot water supply (hot water supply)
Further:
Letter F- closed combustion chamber with forced removal of combustion products.
Without the letter F- open combustion chamber with natural removal of combustion products.
iN, FiN- a boiler without a built-in expansion tank, circulation pump, safety valve and pressure gauge (there is a letter N). This allows the buyer to independently select and purchase the necessary equipment for a specific heating system.
i, Fi- the boiler is equipped with a built-in expansion tank, circulation pump, safety valve and pressure gauge (no letter N).
For example:
SLIM 1.230 FiN- single-circuit heating boiler, with a closed combustion chamber, without additional hydraulic accessories.
Features of Baxi SLIM floor-standing gas boilers:
|
Advantages of Baxi SLIM floor-standing gas boilers:
- Boilers with modern design and compact dimensions. The width of single-circuit models is only 35 cm.
- Built-in electronic self-diagnosis system, which allows you to automatically detect up to 10 types of possible malfunctions in the operation of the heating system, which makes it easy and convenient to operate and maintain the boiler.
- The presence of built-in weather-dependent boiler automation with the ability to connect an outdoor temperature sensor allows you to automatically change the temperature of the heating system depending on the outside temperature, which provides a high level of comfort and real gas savings. To create a comfortable microclimate in the room, you can also connect a room mechanical or programmable thermostat to the SLIM boiler.
- Availability of models with a closed combustion chamber. These types of boilers are extremely convenient when it is not possible to organize a standard chimney, as well as when placing the boiler in a living space, for example, in the kitchen.
- Thanks to the continuous modulation of the burner flame, rather than its stepwise regulation, smooth adjustment of the boiler power is ensured, which ensures its long-lasting operation and saves gas consumption.
- The boilers are adapted to Russian operating conditions and are resistant to changes in gas pressure, operate stably at low pressure, producing at least 50% of the thermal power at an input gas pressure of 5 mbar.
- Automatic frost protection, which is activated when the water temperature drops to 5°C. Included in the delivery set for the SLIM boiler model with a power of 62 kW. includes a minimum gas pressure switch, which puts the boiler into standby mode and automatically turns it on when the gas supply is restored. The minimum pressure switch is very useful in winter in case of possible interruptions in gas supply and it can also be used for other models of boilers in this series.
- The presence of two temperature control ranges (30 - 85°C and 30 - 45°C) allows the use of boilers when operating in “warm floor” mode only.
- The heat exchanger sections are made of high quality cast iron.
- Double-circuit boilers have a protection system against the appearance of legionella bacteria in the system, which once a week heats the water in the boiler to a temperature above 60°C, preventing their appearance and ensuring the safety of the consumer’s water supply.
Single-circuit boilers can be connected to Slim UB series boilers with a capacity of 80 or 120 liters with a tank made of enameled or stainless steel. The boiler is made in the same design as the boiler and the temperature in it is controlled either from the boiler panel or from the boiler panel.
Design features of gas floor-standing boilers of the SLIM 1. …i(N), SLIM 1. …Fi(N), SLIM 2. …i(Fi) series
Gas system
Hydraulic system
Temperature control
|
Control and safety devices
|
Design features of gas floor-standing boilers of the SLIM HP series
Gas system
Hydraulic system
|
Temperature control
Control and safety devices
|
Technical characteristics of floor-standing gas boilers Baxi SLIM HP
Parameter | Unit change | Heating only | |||
SLIM HP 1.830 iN | SLIM HP 1.990 iN | SLIM HP 1.1160 iN | |||
Max. useful thermal power | kW | 82,8 | 99,4 | 115,9 | |
Min. useful thermal power | kW | 49,7 | 59,6 | 69,5 | |
Max. thermal power consumption | kW | 90 | 108 | 126 | |
Min. thermal power consumption | kW | 54 | 64,8 | 75,6 | |
Maximum flue gas flow | kg/h | 235 | 243 | 359 | |
Maximum flue gas volume | m 3 / h | 187 | 194 | 284 | |
Required traction | mbar | 0,08 | 0,08 | 0,08 | |
Efficiency at 100% power and t=70°C | % | 92 | 92 | 92 | |
Efficiency at reduced power and t=30°C | % | 92 | 92 | 92 | |
Losses through the housing when switched off. boiler at Δt=30°С | W | 437 | 505 | 568 | |
Min. necessary water circulation through the boiler Δt=20°С | m 3 / h | 3,56 | 4,27 | 4,98 | |
Water pressure loss in the boiler | mbar | 31 | 41 | 53 | |
Volume of water in the boiler | l | 35 | 40 | 44 | |
Max. operating pressure in the heating circuit | bar | 5 | 5 | 5 | |
Max. consumption of natural (liquefied) gas | m 3 /h (kg/h) | 9,5 (7) | 11,4 (8,4) | 13,3 (9,8) | |
Chimney diameter | mm | 202 | 202 | 252 | |
Power/voltage | W/V | 150/230 | 150/230 | 150/230 | |
Height x Width x Depth | mm | 1209x531x1100 | 1209x612x1100 | 1209x693x1130 | |
Net weight | kg | 364 | 420 | 470 |
Specialists of the company "Thermogorod" Moscow will help you choose, buy, and install a Baxi floor-standing boiler, will find an acceptable solution at a price. Ask any questions you are interested in, a telephone consultation is absolutely free, or use the form "Feedback"}