DIY wedding bouquets from ribbons. Master class on creating a wedding bouquet from fresh flowers. The main advantages of the dummy

You can buy a ready-made bouquet for your wedding, reducing wedding hassle. Or you can surprise your guests with a hand-made bouquet.

An important attribute of a wedding celebration is the bride's bouquet. The symbol of the groom presenting a bouquet to the bride on the wedding day is confirmation of the proposal made to his beloved. If the bride accepted the bouquet, it means she agrees to marry him.

The bride should not let go of the presented bouquet until the very beginning of the banquet. Therefore, the bouquet is an integral part of the wedding wardrobe. The selection of which must be taken no less carefully than any other part of the bride’s image.

You can order a wedding bouquet from a florist. But suddenly, despite all the advantages of a specialist, the bouquet will not be to your taste. To avoid disappointment and spoil the important day of your life, you can prepare a wedding bouquet with your own hands.

Wedding and flowers

How to make a bridal bouquet with your own hands?

In order to make a wedding bouquet with your own hands convenient and beautiful, you must follow the manufacturing sequence:

Choosing a form.

A round bouquet is the most popular. Suitable for almost all brides. With the exception of girls with short stature.

For such a bouquet, different flower combinations are usually used, either roses or lilies. The bouquet is made in the form of a ball with a comfortable handle.

Bouquet cascading. Or in the form of a drop, a waterfall

Flowers with long stems are suitable here. Choose the length to suit your taste.

This bouquet looks great with a dress with a train. It lengthens your height well and adds a slim figure.

We carry the “cascade” with both hands, holding it at stomach level

Ball of flowers

A very original bouquet, which is rare in Russia. It differs from a round bouquet in that it is made without a handle. The bride holds it with an attached ribbon or beads.

Extraordinary bouquet

For lovers of a euphoric release, you can prepare a bouquet in any non-standard form: fans, baskets, muffs, umbrellas. The main thing is to understand that such compositions are very difficult to perform. They require certain skills, patience and effort.

We decide on the size.

There are some nuances that need to be taken into account when choosing the size of the bouquet:

Large, round bouquet for a lush bride
Fragile and small girl - miniature bouquet
Multilayer dress - lush bouquet
If there are other decorations on the dress in the form of rhinestones, sparkles, beads, or on the bouquet, we exclude decorations.

Select a handle.

In order to hold the bouquet comfortably, you need a comfortable handle. We make it from flower stems or use a porta bouquet maker. This is a convenient device for holding a bouquet, while feeding the flowers with moisture due to the installed damp sponge.

Choosing flowers.

We choose flowers so that they stand out against the background of the dress. It is better to choose contrasting colors. To the red bouquet - add pink, white, yellow. To yellow - lilac, red, blue. To pink - a variety of colorful tones
The most popular bouquets for brides are roses. Roses symbolize love, beauty, devotion. They retain their appearance very well and for a long time. Therefore, they are most in demand when composing a wedding bouquet.
Lilies are a little inferior. But they are undoubtedly popular. Their beauty represents hope, happiness, purity
Brides from high society are supposed to give orchids and myrtles.
Tulips are good for spring
Depending on your taste, you can make a bouquet of any flowers: peonies, asters, camellias, daffodils, callas, lilacs

To make any bouquet with your own hands you need:

Fresh flowers and leaves
Satin ribbon
Silicone based adhesive
Portbouquet
Needles
Any decorations to taste

Video: DIY wedding bouquet

Wedding bouquet of roses

Vintage bouquet of roses The vintage version of the wedding bouquet looks gorgeous.

In addition to the main materials, we prepare in advance a variety of brooches, beads, earrings, stones and wire
Attach cut pieces of wire to each decoration
Carefully insert large decorations into the tied roses. We alternate them with small ones. Forming a composition
We tie all the stems and decorate with satin ribbon
We string beads onto a wire 7-8 cm long and make hooks out of them. We fasten each one to a long wire. Wrap with satin ribbon. Decorating the bottom of the composition
We take 1.5 m of taffeta tape, corrugated by threading the wire. We connect the edges with glue. We put a skirt on the leg of the bouquet. We decorate by wrapping it with medium-width ribbon. We decorate the top a little more with a thinner ribbon. Decorate with rhinestones

Video: Wedding bouquet of green roses

white wedding bouquet in the shape of a waterfall

A very original white bouquet made by a waterfall is obtained.

We choose flowers of different degrees of maturity and sizes
We form a bouquet, starting with the largest flowers, ending with small ones
Making such a bouquet is no different from the process of making a round bouquet described above
It all depends on your imagination

Video: Bouquet of white roses. Flower sketches

To create a bouquet of satin ribbon you need:

Bouquet foot stick
For the base of the funnel
Floral base or foam ball
Rigid mesh or lace
Ready-made store-bought stamens
Scissors, wire, needle
Ribbon, the choice of width depends on the size of the desired rose
Glue gun

Let's get creative:

To make a handle, wrap it with satin ribbon. Handle length is at least 12cm. We straighten the remaining tails of the tape in four directions
We decorate the funnel with a mesh and glue it to the handle, where the tape sticks out
We attach the ball to the funnel with glue

Let's move on to the flowers:

Step-by-step making of flowers

We burn the edges of cut pieces of tape up to 5 cm long. So that the fabric does not get wet. Leave two 3 cm squares of tape to make the core. We glue the two upper corners of the fabric. We bend the two lower corners, gluing them in the middle of the petal. We do this with all the prepared fabric.
Roll the prepared tape, 3 cm in size, into a tube. Secure with glue. We also wrap this tube with the next one. Sew and glue them together
Glue the finished petals in the center of the circle so that the new one extends slightly beyond the edges of the finished one.
The first stage is over. We prepare a composition from selected sets of flowers, glue ready-made flowers along the diameter of the circle
Decorate with brooches, beads, rhinestones. Exactly the same as the above-described sets of compositions

Video: Wedding bouquet made from ribbons

Round wedding bouquet of peonies

Making a round wedding bouquet of peonies:

We cut the stems to the same length 20-25 cm
We clear the stem of thorns, leaves, twigs
We tie the four largest peonies with tape, the most blooming ones
Add the rest of the peonies to this base in a circle, creating the composition you like. Secure with tape
We wrap the peony stems with the same material from top to bottom, forming a handle. Fix with pins
Add decorations if necessary. Don't forget to secure it firmly with glue or pins.

Video: Wedding bouquet of lilies of the valley and peonies

Wedding bouquet of tulips in a porta bouquet:

Soak the portbucenica sponge with water
We wrap the prepared leg with a satin ribbon, from top to bottom. We fix the layers one by one with silicone glue or a glue gun
Place the prepared stem into the vase
Cutting tulips to the desired length
Insert one at a time into the designed tube
We design any composition
Checking for empty space. Carefully hide the sponge
Decorate with green branches, bows, beads, rhinestones
We fix leaves, rhinestones, beads with a glue gun. Lace - needles

a set of flowers in a porta bouquet can be formed from any flowers.

White wedding bouquet in a porta bouquet

Video: Making an original bouquet of tulips

Wedding bouquet color

An important factor is the choice of color for the wedding set, not only for the purpose of an aesthetic and harmonious appearance, but also taking into account the psychological factor of color perception. The bouquet's palette can lift or worsen your mood, since each color has its own meaning.

Red wedding bouquet

It is customary to give red roses to the lady of the heart thanks to an ancient legend. One day, the goddess of love, Aphrodite, ran to meet her beloved, and accidentally pierced her foot with the thorn of a white rose. The beautiful white flower turned blood red. This is why red roses are associated with the symbol of love.

It is not necessary to present only roses. The color red suggests authority and activity. Any red composition can evoke a feeling of satisfaction in a bride with such a character.

White color of wedding bouquet

The white color of flowers means naivety, gullibility, purity and morality. Therefore, white flowers are presented to chaste girls. Giving a white bouquet to the bride at a wedding is considered a good omen, promising a long and comfortable family life for the newlyweds.

Pink color of wedding bouquet

Pink color means hope, modesty, love. This is a pleasant sign for a wedding celebration. The beginning of a new, pleasant stage of the relationship.

Yellow color of wedding bouquet

Don't be afraid of yellow in your wedding bouquet. The times when this color was associated with treason and betrayal are gone. Now a bouquet of this color is a sign of joy, fun, happiness and optimism.

Blue color in a wedding bouquet

The blue color of the wedding bouquet will appeal to mysterious, enigmatic girls. After all, this is what the color blue means. The composition, with the advantage of blue, speaks of great fidelity, devotion, and nobility of the groom. Very strong and pure love.

Orange color in wedding bouquets

It is better for the groom to avoid this tone in a wedding bouquet. Since it is most often presented to superiors, it is a sign of admiration for authority.

Wedding bouquets for the bride photo

Bright wedding bouquet of fidelity

Vintage bouquet for wedding

Tenderness, purity, freshness

Bride and white bouquet

Roses and wedding

Variegated bouquets for weddings

Options for passionate, red bouquets for a wedding celebration

Delicate white wedding bouquet

White flowers with delicate greenery

Wedding bouquet with lavender

Exquisite wedding bouquet

The color of devotion in a blue wedding bouquet

You can make very beautiful wedding bouquets with your own hands. If you have desire, patience, perseverance, a penchant for creativity and taste. It’s worth trying in advance and making your own wedding bouquet. If in doubt, contact your florist. Surely, a good florist will offer many options to find something suitable. Or maybe something from the photos above will suit you.

Do you want your favorite hobby to also generate income? Then learn how to make roses from satin ribbons, and then create bouquets and topiary from them.

The art of kanzashi originated in Japan. They say that it owes its appearance to geishas. They decorated their hairstyles with fresh flowers, but they quickly withered. Then the girls came up with the idea of using ribbons that were twisted in a special way for these purposes.

Now not only flowers are made from this material, but also many other charming things, for example, a swan. But to create this graceful bird, first learn the technique of folding pieces of ribbon to form petals. After all, our swan will be covered with exactly these blanks.

Kanzashi petals made of satin ribbons

Start by preparing what you need. You must have:

satin ribbon;
pin;
tweezers;
lighter.

First, let's learn how to make round petals. Cut the ribbon into squares measuring 5x5 cm. Take the first one, fold it diagonally, and then pinch it with tweezers on the left side.

Now place 2 opposite corners of the triangle on the third one, which is at the bottom.

To make round petals further, turn the workpiece the other way and lay 2 new opposite corners towards each other. The place where they are connected can be soldered using a lighter flame or simply sewn.

Instead of a lighter, you can use a burning candle. Also, to connect the elements, they are sometimes glued together with nail polish.

Now bend the workpiece in half and pin it in this position with a pin.

Sear the bottom edges to seal them together. During the final procedure to create a round petal, hold the workpiece with tweezers, pinching its edge until it cools.

Here is the wrong side of the petal.

And here is the front side.

If you want to make a flower from ribbons, then make several of these petals, sew them together and this is what you get on the back and front sides.

And here's how spicy kanzashi petals are made. After cutting a 5 x 5 cm square, fold one and then a second time diagonally in half. Holding the tweezers close to the edge, cut off the frayed parts and solder these edges over the flame.

Now cut the raw corner of the workpiece and solder it in this place using a flame.

After learning how to make sharp and round petals, you can make flowers from satin ribbons. For beginners, mastering kanzashi begins with creating similar simple petals and flowers. This is what a spectacular product you will get.

You can decorate a postcard with this flower, and if you pin a pin on the back, you will turn it into a brooch.

How to make a swan from ribbons?

You will make such a proud white-winged bird using the skills acquired above and the following materials:

pliers "nippers";
glue;
wire;
scissors;
lighter;
a thread.

To make a swan frame, twist the wire as shown in the photo. And, starting from the top, wrap the frame with white thread to the bottom of the neck. Wrap it thicker around your head.

If you want to make a swan of a different tone with your own hands, then take a thread of the corresponding color. The ribbon should be the same color.

To decorate the bird's beak, wrap a narrow red ribbon around its nose. And for the eyes, use 2 squares of black satin, folding them into petals. Glue the eyes in place.

Now make a round petal from a white square, glue it on the bird’s forehead, and next to it, on one side and the other, 2 smaller round petals. In the same way, paste over the head and neck of the graceful bird further.

Having reached the body, finish this part of the work and begin making its wings.

To do this, fold 2 wires as shown in the photographs and wrap them with thread of the same color that you used to decorate the head, neck, and torso.

To make the swan further, cover the wing blanks with sharp petals turned to the reverse side.

Attach the free ends of the bird's wings to its body and cover its back with sharp petals. To make the tail, glue them in this place in a checkerboard pattern in 3 rows.

And this is what a beautiful hand-made swan you will get as a result.

Bouquets of satin ribbons

Unlike fresh flowers, these will not wither and will delight you for a long time. They can be given to a person for any special event, and the bride will be even more beautiful with a wedding bouquet made using the kanzashi technique. For the newlyweds they are made in light colors. You can use white, pink, blue ribbons. Also needed for work:

white organza;
beads;
textile glue;
pins;
wooden stick;
newspaper;
twine;
needle with thread;
pencil;
scissors;
ruler.

First, we will make a circle, to which you will then attach flowers. Give one or more newspapers this shape by crumpling them. Then wrap them with twine. On one side, between the wound threads, make a hole, pour glue into it and insert a wooden stick.

While the bouquet base is drying, read how to make roses from satin ribbons and begin this part of the enjoyable work. For the first type of flowers, you only need a 2.5 cm wide ribbon and pins.

Fold the corner of the ribbon toward you and begin twisting the core of the flower. You can fix it with glue or by stitching with a needle and thread. Continue twisting the ribbon further. When the top folded corner becomes small, make 1 turn of the tape back and continue twisting, remembering to fix the curls with glue or thread.

When the top corner becomes small, turn the tape over again. In this way, complete the rose. When the satin ribbon runs out, sew the flower from the inside out with a thread and a needle. Also make the rest of the roses the same color. You can see how to make such roses in the video at the end of the article.

Here's how to make a rose differently: cut a circle with a diameter of 4 cm from thick fabric. Determine its center, draw 2 identical segments from it to the arc of the circle. Cut out this corner. Sew the 2 cut sides of the circle together, you have a low cone of fabric.

This flower is good because it can be created even from narrow strips. Not only are bouquets decorated with such roses, they are used to make brooches and decorate hairbands.

Place the edge of the tape on this cone and sew it to it. Lay the tape on top, then bend it back so that 2 triangles lie on half the square. Moreover, their larger side is on the diagonal of this square.

Perform the next turn so that the larger side of the new triangle lies on the second diagonal. Thus, by making turns and sewing them to the fabric, as shown in the photo, shape the entire cone.

Make a few more flowers. You will get ribbon roses like this one.

Sew both types of flowers onto a round base of newspaper and thread. Fill small gaps between them with beads, and large ones with organza flowers. For the latter, fold a strip of this material 8 cm wide and 50 cm long in half. You have a ribbon 4 cm wide. Piercing both edges along the length with a needle, gather it onto a thread, tighten it, and tie a knot. Using the same thread, sew these airy chrysanthemums between the roses.

That's it, your extraordinary bouquet of satin ribbons is ready.

DIY topiary made from satin ribbons

Roses made from satin ribbons will also help in its creation. Such creative work looks great on the desktop, adding a touch of coziness to it. The bouquet will decorate the house and will be an excellent gift. And if you like the kanzashi technique and it works out well, it can become your profitable business. You can negotiate with flower shops to supply them with such items or sell them online.

But first you need to master this handicraft and get better at it. To make a topiary, you must have:

satin ribbons of two colors;
glass or flower pot;
silver fabric;
white tape;
wooden stick;
alabaster;
tennis ball;
padding polyester;
awl;
decorative material.

Make a hole in the ball with an awl and insert a wooden stick into it.

Add water to the alabaster, stir, you should get a solution similar in consistency to sour cream. Pour it into a glass, pot or other suitable container and place a stick in its center.

While the solution hardens, we will make flowers from ribbons. To do this, take a ribbon 2.5–4 cm wide, bend its corner, and begin to twist it into a rose.

Continue making the flower, periodically turning the edges of the ribbon back.

To prevent the rose elements from unraveling, sew them together with a needle and thread. Do this so that the threads are not visible on the front side of the flower.

Sew the remaining free edge to the already lush blossoming bud.

In the same way you need to make the rest of the roses from satin ribbons.

Next, you need to make leaves using the kanzashi technique. To do this, cut a small strip from the tape to make a rectangle. Bring the two top edges down, sew everything here together with thread and a needle. Now connect the 2 lower corners, also secure them with thread. Turn the resulting petal inside out and sew it to the rose.

Attach 1-2 petals to each flower.

To make the topiary further, you need to make several decorative balls. Cut the silver fabric into small squares, place a ball twisted from padding polyester in the center of each, and tie them with thread.

Make 12 of these balls or as many as you need to decorate your topiary.

By this time, the alabaster has dried, so you can start decorating the topiary. Glue roses to the tennis ball and silver balls between them.

Now you need to decorate the stand. To do this, cut out a circle from silver fabric of such a size that it completely covers the bottom and sides of the container and turns inward. Attach the circle to the container, wrap the edges. Making punctures at a distance of 3 cm from each other, sew the fabric to the pot. For greater effect and to hide the stitches, pin circles made of thick, non-fraying fabric (for example, fleece) or thin faux leather here. Place a bead in the center and thus decorate the topiary from ribbons.

There are many more ideas that will help you turn satin ribbons into beautiful accessories and things; the video will also give other tips for inspiration. Watch more interesting things in these videos:

On her wedding day, the bride has the right to any whims. In fact, there can be a great many reasons for refusing a traditional bouquet of fresh flowers.

For example, if you are planning a wedding in the Tiffany style, then the bouquet should combine white and turquoise tones, and turquoise flowers are very rare. It happens that a bride or groom has a dislike for seemingly harmless representatives of the flora, such as roses or hydrangeas. Or even one of the newlyweds has allergies.

In general, it does not matter at all why the bride decided to refuse. The main thing is that it can be completely replaced, and a bouquet of satin, guipure and gauze ribbons will look as fresh and original as one collected from real flowers.

Preparing the handle and base for the bouquet

The traditional shape of the bouquet is a stylized ball. If the bouquet consists of fresh flowers, there is no question: their stems are simply decorated with guipure or satin. However, artificial flowers do not have stems, so we will form the handle and base of the bouquet ourselves.

For this we need:

a piece of plastic pipe (15-20 cm);
unnecessary CD;
polyurethane foam;
textile;
braid and lace for decorating the bouquet handle;
hot glue.

Step-by-step instruction:

The pipe needs to be inserted into the hole of the CD and glued with hot glue.
Then the mounting foam should be squeezed onto the surface of the disk so that the lump has the shape of a ball.
Excess foam must be cut off with a knife.
Decorating the bouquet handle completely depends on the taste of the bride and the style of the intended composition. The simplest option: gather a little lace using a thread and glue the resulting frill to the back of the CD.
You can also sew a pen case using guipure or satin. Such a cover will completely hide the pipe (to keep it in place, it can be tied with satin braid in several places, and its flared part that expands at the top will hide the bottom of the CD. The cover can be white or colored, decorated with colorful ribbons.

There is another way to collect flowers in a bouquet, when each flower is attached to a wire, which, in turn, is passed through a pipe. In this way, you can create very original compositions, give the bouquet an oval or slightly “disheveled” shape, but this requires more complex skills. Find out how to make more interesting "non-living" ones.

Bouquet of satin roses

In order to make artificial roses, you will need satin ribbons. The splendor of the roses depends on the length of the ribbon, so the first rose can be collected without cutting the ribbon from the skein: this should be done as soon as the splendor of the artificial flower seems satisfactory. The approximate length of the tape is approximately 30 cm.

Satin is a free-flowing material, so it is better to burn the cut area with a candle flame. The edge of the tape should be folded into a triangle inside with the wrong side, and the remaining part should be wrapped around the “middle” and secured with thread.

Fold the free end of the ribbon again so that the wrong side is not visible at all, and again wrap the ribbon around the center, trying to make sure that the middle is above the “petals”, and sewing each turn with thread. When the splendor of the rose becomes acceptable, the ribbon should be cut and the edge sewn up.

The center of the flower can be decorated with pearls or rhinestones. On average, nine to eleven flowers are enough for a bouquet.

Using hot glue, the roses are attached to a lump of foam. The alternation of roses, for example, white and pink, looks very beautiful. A bouquet of dark burgundy roses is also good, the color of which will be favorably set off by a snow-white guipure pen case.

You can glue a little gauze, guipure or tulle into the space between the flowers, forming delicate ruffles from the fabric. Feathers will also look beautiful.

The bride's bouquet is an invariable attribute of any wedding ceremony. It’s hard to imagine a beautiful bride without a bouquet in her hands... But what about unmarried girlfriends who dream of catching this attribute at the end of the wedding so that they can also experience the happiness of being united with their loved one.

And if in the old days bouquets were mainly ordinary combinations of fresh flowers, then in recent years they have become a real masterpiece of decorative art.

Let's start creating a bouquet

You can create a miracle from ribbons and artificial flowers with your own hands, and decorate any wedding with this creation, using your skills in the field of needlework.

To make an artificial bridal bouquet with your own hands, you should approach the creative process responsibly. First you need to decide what to use as the basis of the future bouquet. You can, of course, use ready-made “dummies” - so-called “microphones” are very suitable for the base of a bouquet.

But what to do if it is not possible to purchase such attributes, or you don’t want to pay the “extra” money.

You can make an excellent basis for a bride’s bouquet with your own hands from what is literally in every home:

used, unwanted CD;
pieces of foam rubber (height 6 cm);
white cardboard;
any white fabric;
cardboard tube with a diameter of 3.5 cm and a length of 13 cm (in this master class we used an old roller from a clothes cleaning device).

So let's get started! You need to glue foam rubber onto the CD (using a glue gun). It's good if you have this material in the right size. If not, then, as in this case, you need to glue together several pieces of foam rubber.

If you don’t have foam rubber, you can use polyurethane foam by applying the required amount to the CD.

The next stage is to give the foam rubber (spray foam) the desired shape. This can be done using a stationery knife or regular scissors, cutting off what is unnecessary. The shape of the bouquet is a hemisphere.

Now we make the handle of the bouquet. Don't be discouraged if you don't have the part you need, as shown in the photo. It can be replaced by gluing a similar one from VERY thick cardboard (so that later the handle of the bouquet does not crumple in the hands of the bride).

The length of the handle is 13 cm, the diameter is 3.5 cm. The former roller from a clothes cleaning device is very well suited in size to the CD. Glue it in the center of the CD, also using a glue gun.

In order to avoid possible troubles with the bouquet handle coming off during the ceremony, we will duplicate the fasteners using tape.

We close the hole in the bottom of the handle by selecting and gluing a white plastic cover of a suitable size. If you don’t find such a part, you can hide the hole under a white cardboard circle.

Next, from any white fabric (silk was used in this mk), you need to cut a circle with a diameter of 23 cm and glue it to the hemisphere blank. Moreover, try to glue it over the entire hemisphere so that the flowers from the satin ribbon attached later do not hang only on the material, but “sit” tightly on the bouquet itself.

We fold the fabric over the CD and also carefully glue it. We use an indispensable hot glue gun.

We skillfully hide the parts of the material glued to the CD under a white cardboard circle. The circle is the size of a CD with a hole cut out in the middle for a pen. Glue the cardboard with hot glue.

The base of the bouquet is ready!

The second stage of creating a bouquet - flowers and decorations

To continue work, you need to prepare the following materials and tools:

white tulle;
white satin ribbon of different widths (5, 3.5; 2.5; 1.25 cm);
tea rose satin ribbon (width 5 cm and 0.3 cm);
white beads with a diameter of 0.5 cm - 10-12 pcs.;
glue gun;
scissors;
white needle and sewing thread.

Let's start by decorating the handle. We glue a 2.5 cm wide tape in the area of the cardboard on the CD, trying to hide the tape. And we continue to wrap the tape around the handle, gluing the tip of the tape. You can play it safe in some places in the middle of the handle by also placing the tape on the glue.

Now we will cover the edge of the hemisphere with a 1.25 cm wide white tape, placing the tape in folds. You can sew it on, or you can use the quick glue option.

To continue our work we will need roses of different sizes. You can purchase ready-made ones, or you can make them yourself, using the large number of master classes on how to make them offered on the Internet.

In order to create a rose you need to take the minimum set:

satin ribbon of the desired color and width (in this micron, the ribbon width is 3.5 cm);
regular white sewing thread;
a needle;
scissors.

To prevent the end of the ribbon from unraveling, you need to cut it at an angle of 45 degrees.

Twist the ribbon a few turns from the right edge and secure with a thread and needle. This will be the center of the rose.

Now the upper left end of the tape needs to be bent back and down.

Sew the “received petal” to the base of the future rose (the needle and thread must be inserted through all the ribbon layers). Try to pull the thread tight.

Repeat the previous step several times - as many as you want to get rose petals.

When forming a rose, make sure that the places where the ribbon bends do not fall on the same areas of the flower, otherwise the rose will be symmetrical or one-sided.

Rose is a flower that does not tolerate orderliness. When you have a rose of the desired size, cut the ribbon, secure it and use scissors to remove the “tail” that has formed at the base of the rose. Do this carefully so as not to cut the threads that secure the rose's coils.

A beautiful DIY rose made from satin ribbon is ready!

Now let's move on to the most interesting and important moment - collecting the bouquet itself.

In the upper part of the hemisphere in the middle we glue a cream-colored rose with a diameter of about 6 cm.

Now around this central color we will “plant” 7 white roses, 3-4 cm in diameter. Try to glue the flowers with minimal gaps between them.

The next tier of the bouquet is 5 flowers from a tea rose colored ribbon. The diameters of these decorations are 4-5 cm. First try to attach the roses using tailor's pins in order to distribute them as evenly as possible in the circle.

Between these tea roses you will need to place roses framed with tulle. To do this, cut out strips of tulle 13 by 6 cm. Fold them in half lengthwise and, gathering along the edge, glue or sew them to small white roses (diameter 2.5 cm).

In total, you need to make 5 such “blanks”.

Glue the roses with tulle between the tea roses.

All that remains is to make the last, lowest tier of the bouquet. It will be in the form of tulle “counters” with small bows and beads in the middle.

For the “pounds,” we cut out 8 strips of tulle, 23 cm long and 7 cm wide. Fold them in half lengthwise and stitch them together using a needle and white thread. We glue the “pounds” onto the last tier of the bouquet, having previously attached them with tailor’s pins to accurately fill all the voids. If in your case there are still empty spaces, just add 1-2 pounds.

From a tea rose colored ribbon (0.3 cm wide) you need to make small double bows and glue them in the middle of the “bows”. We attach a white bead on top of the bow with a hot gun. We repeat all these steps for all “pounds”.

There is one last easy step left. We cut the tulle 70 cm long and 15 cm wide. Stepping back 5 cm from one edge, lay a tea rose-colored satin ribbon (0.3 cm wide). We use a ribbon with a wide eyelet.

Using a ribbon, we tie the resulting “skirt” at the base of the bouquet, trying to evenly distribute all the folds.

We glue white beads onto the veil in several places.

The hand-made and unusually beautiful artificial bridal bouquet is ready! You can make even the most complex compositions with your own hands.

Aleshina E. V.

Today you can make a bouquet for the bride with your own hands. For this you can use both satin ribbons and artificial flowers. Below you can see how hand-made bridal bouquets made from artificial flowers and satin ribbons look like. So let's make a bride's bouquet together with a step-by-step analysis with our own hands!

We create our own wedding bouquet from delicate ribbons with photos

The article offers the opportunity to study a detailed master class on making a bridal bouquet from satin ribbons with your own hands.

To make such a bouquet you will need a white satin ribbon five meters long and five centimeters wide. The same pink ribbon, only two meters long, a white polka dot ribbon two and a half centimeters wide and one meter long. White meter bias tape. Thirty centimeters of openwork white ribbon, which will be gathered on one side. White ribbon one centimeter wide of arbitrary length. For gluing - hot glue. For the base - polyurethane foam, a fifteen-centimeter plastic tube. For decoration - beads and hairpins with roses.

For this bouquet, roses will be created from satin ribbon using the simplest method. Depending on the splendor of the flower, it can be made from any length of ribbon. You can start from thirty centimeters. The ribbon is not cut until the rose acquires the necessary splendor.

First of all, the edges of the ribbon are folded to the wrong side, after which it is slightly twisted into the shape of a tube. When the bent side is no longer visible behind the tube, you can bend the edges. Bends away from himself. And again the rose is twisted until the bent edge is hidden behind the base. All this is secured with thread. Having reached the desired size, you can cut the ribbon and secure the rose with thread. Make four more roses in the same way. Using hot glue, beads are glued to the finished roses, to which an openwork white ribbon is sewn on the reverse side. You need to make nine white roses.

In order to make the base of the bouquet, you need to squeeze a little foam onto the disk. Wait until it dries and swells, then cut off the excess. A plastic tube, which will be the handle of the bouquet, is glued to the base with hot glue. Then you can attach the finished roses in any order. It is better to glue them closer to each other.

The edges of the disk should be covered with openwork ribbon, and the middle should be filled with the remaining white. To avoid large gaps, it is better to use glue when connecting. Next, bows are made from polka dot ribbon, which fill the remaining gaps between the roses. The spaces are also decorated with hairpins with white flowers. The handle of the finished bouquet is wrapped with bias tape and a bow is tied with a thin white ribbon. Thus, the bride’s bouquet made from ribbons with your own hands is ready. Below you can see step-by-step photos of how to make it:

We collect a holiday gift for the bride from artificial flowers and sweets

The article will tell us how to make a bouquet for a lovely bride step by step with your own hands, photos are attached.

First of all, you need to design a port handle - this is a plastic device with a floral sponge inside. Outwardly, it resembles a microphone and is used to attach a bouquet to it. You can buy such a pen at any florist store.

You don't need a sponge to create this bouquet, so you can remove it right away. A piece of white fabric should be wrapped around the bottom of the handle grille. The top edge of the fabric must be folded inward.

The base for the bouquet is cut out of polystyrene foam, which will be inserted inside the handle. Then you need to put on the top grille. Wear special “skirts” on the handle, which can also be purchased at a florist store. Secure them with a plastic device. Fix the fabric on the grille when putting on the “skirt”. To decorate the handle, and also so that the plastic part of the “skirt” is not visible, a piece of floral mesh folded in half is glued to the plastic. The handle is wrapped with a white satin ribbon. You can hide the protrusion at the base of the handle with lace, and finally glue on a beautiful bow and rhinestones. You can also tie a variety of ribbons that will hang under the bouquet. Thus, the design of the bouquet handle ends here.

In order to make blue flowers, you need to put a bead on a wire. Fix the bead by bending the wire on both sides. Cut out a “fence”-shaped piece from corrugated paper. Make five petals. Twist a bead into the prepared blank, secure the base of the flower with tape, and slightly stretch the petals to give a more natural shape. The base of the finished flower and the wire must be wrapped tightly in corrugated paper.

Next, roses are made for the bouquet. You need to cut out blanks for future petals from white paper. The height depends on the candy. All workpieces must be given the desired shape. You need to collect the rose starting with wrapping two wide candy petals. Then take a strip with four petals and wrap the resulting bud. The petals should overlap. Do the same with the second same strip. The base is secured with floral tape. Next, a blank of five petals is screwed on, without making a large overlap. The base of the flower must be connected to a wire and wrapped in sepals, which were cut out of green corrugated paper. The entire base of the finished flower and wire must be tightly wrapped with a strip of green paper. Use the same method to make the required number of white candy roses.

The assembly is done from the tail of the bouquet. You need to take a long artificial branch without leaves and attach the first rose bud to its tip. Next, roses and blue flowers are wound onto the branch alternately. You can also add artificial leaves. An organza ribbon is inserted into the gaps and secured with glue.

The tip of the branch must be inserted into the foam blank of the previously made handle. You can fix the tip of the tail with glue, and you can tape the twig to the handle grill with electrical tape. After this you need to insert roses and blue flowers in a circle. All empty spaces can also be filled with organza ribbons.