The lineup Slim in boilers are produced by Baxi Corporation for heating various objects. This equipment is in greatest demand among owners of country houses and cottages. His price available to most buyers, boilers of this series They are characterized by a long service life, ease of installation and operation. They are accompanied by detailed instructions in Russian. However, we recommend that you contact our company’s specialists for installation and configuration of boiler equipment. This guarantees the safety and effectiveness of using the product in domestic and industrial conditions.
Floor boiler Baxi Slim : basic information
These devices are highly efficient single-circuit floor-mounted boilers. They are equipped cast iron heat exchanger, electronic system ignition of the burner. There is automated flame control, which is carried out by ionization and by electronic control of gas fuel consumption. Other innovative technologies have also been developed that can reduce the risk of emergency situations to a minimum.
There are two types of boilers in the Slim model range. The first of them are supplied complete with hydraulics (there is a pump, expansion tank, pressure gauge). The power of these models ranges from 14.9 to 29.7 kW, the number of heat exchangers is from 3 to 5. The second type of boilers with a capacity from 22.1 to 62.2 kW are not equipped with hydraulic accessories. The power of the device is selected depending on the total size of the heated premises and the amount of heat loss.
Floor-standing gas boiler baxi slim – characteristics and advantages
The main dimensions and technical characteristics are as follows:
- Height – from 85 to 165 cm (depending on the model);
- Width – 35 cm;
- Depth – from 52 to 87.5 cm;
- The maximum permissible water pressure in the heating circuit is 3 atmospheres;
- The combustion chamber is open;
- Electrical network voltage – 230V;
- Power consumption – 15 kW;
- Energy efficiency class – A or A+
This equipment has high efficiency (over 90%), a stylish design traditional for Italian products, and compact dimensions. It is environmentally friendly, meets European energy efficiency standards, and has a simple and effectively understandable interface. There are options for additional connection of a water heater, timer, and outside temperature sensor. By resetting the burner you can use liquefied gas. This operation should only be carried out by certified employees of specialized companies.
Floor boiler models in
Due to its valuable performance properties, this convection boiler is one of the most popular in the model range. Its rated power is 29.7 kW, but thanks to the ability to regulate the gas supply, it can be reduced. This results in significant savings in fuel consumption.
Like other models, it has a nice design; the body is painted light gray. It can operate both on main gas (its consumption at maximum power is 3.5 m3 per hour) and on a propane-butane mixture (the same figure is 2.56 kg per hour). Capable of heating the coolant up to 85 degrees C.
The functions of power-on indication, automatic ignition, and flame level regulation are implemented.
The boiler is optimally suited for heating private houses with a total area of heated premises of 250-300 m2.
Floor boiler models in
This device has similar characteristics to the previous version, has the same design, but is capable of operating with a maximum output of 40 kW. Therefore we recommend buy to its owners of houses with a total area of heated premises up to 400-430 m2.
The boiler has a sophisticated electronic control system. Just like Slim 1300 in can run on natural and liquefied gas. The maximum fuel consumption, respectively, is 4.69 m3 and 3.45 kg per hour.
The manufacturer has thought through an effectively working security system. There is a constantly functioning auto-diagnosis, a gas control system, protection against overheating, freezing from pump blocking are implemented. Built-in safety valve.
If you decide to purchase one of the Baxi Slim in boilers, we recommend contacting our company. The main advantages of cooperation with us are as follows:
- Low prices for equipment due to direct contacts with manufacturers and distributors;
- Supplies only original products, no counterfeits;
- Individual approach to every customer;
- Strict fulfillment of contractual terms, including those related to deadlines;
- Our specialists are highly qualified, many of whom studied at authorized training centers of the Baxi Corporation and have the appropriate diplomas and certificates;
- Deliveries by personal vehicles and by transport and logistics companies cooperating with us in a short time.
In addition, thanks to constant contacts with Baxi, we can organize bonuses, additional discounts for regular and wholesale customers, and encourage them through various promotions. If you still have additional questions about the capabilities and nuances of using this equipment, contact our consultants. They will provide comprehensive information on Baxi domestic boilers, taking into account their use at home.
All products we supply are certified by Rostest.
Baxi Slim boilers have a wide range of models, boiler power from 15 to 62 kW. Smooth power control and built-in self-diagnosis system provide increased operating comfort and ease of maintenance. The modern design of the Baxi Slim boiler and its compact dimensions (only 35 cm wide) make it easy to place the boiler in any interior. You can choose a model with a built-in boiler or install a separate boiler with the same design next to the boiler (Baxi Slim UB).
Gas system of the BAXI Slim boiler
- Smooth regulation of boiler power in heating and hot water supply modes;
- Smooth electronic ignition;
- The boilers are fully adapted to Russian conditions. Operate stably when the inlet pressure of natural gas decreases to 5 mbar;
- It is possible to reconfigure the boiler for liquefied gas.
Hydraulic system of the BAXI Slim boiler
- The primary heat exchanger is made of cast iron;
- Built-in circulation pump (except IN models);
- Built-in storage boiler for preparing hot water (in double-circuit models) with its own pump;
- Heating circuit pressure gauge;
Temperature control of the BAXI Slim boiler
- Two temperature control ranges in the heating system: 30-85°C and 30-45°C (warm floors mode);
- Built-in weather-dependent automation (possibility of regulation using an outdoor temperature sensor);
- Regulation and automatic maintenance of the set temperature in heating and hot water supply circuits;
- Digital temperature display;
- Possibility of connecting a programmable timer.
Control and safety devices for the BAXI Slim boiler
- Digital self-diagnosis system;
- Ionization flame control;
- Pump blocking protection system (turns on automatically every 24 hours);
- Protective thermostat against water overheating in the primary heat exchanger;
- Draft sensor to control the safe removal of combustion products (pneumatic relay - for models with a closed combustion chamber, thermostat - for models with an open chamber);
- Pressure switch in the heating system - triggers when there is insufficient water pressure;
- Safety relief valve in the heating circuit (3 atm.) and in the hot water supply kennel (8 atm);
- Frost protection system for heating and hot water supply circuits.
Designations in the model name:
Fi- a boiler with a closed combustion chamber: combustion air can be taken from the “street”, the chimney is coaxial (pipe in pipe) or separate, the presence of draft in the chimney is not necessary.
i- a boiler with an open combustion chamber: combustion air is taken from the room where the boiler is installed, the chimney is traditional, providing natural draft.
N- models without a built-in pump, expansion tank, pressure gauge and safety valve.
Models BAXI Slim 2.300 And BAXI Slim 2.230 have a built-in boiler for preparing hot water.
Floor-standing gas boilers Baxi SLIM i, iN, Fi, FiN, HP
What is the difference between boiler models with the designations i, Fi, iN, FiN?
First digit:
1
- single-circuit boiler for heating only
2
- double-circuit boiler for heating and hot water supply (hot water supply)
Further:
Letter F- closed combustion chamber with forced removal of combustion products.
Without the letter F- open combustion chamber with natural removal of combustion products.
iN, FiN- a boiler without a built-in expansion tank, circulation pump, safety valve and pressure gauge (there is a letter N). This allows the buyer to independently select and purchase the necessary equipment for a specific heating system.
i, Fi- the boiler is equipped with a built-in expansion tank, circulation pump, safety valve and pressure gauge (no letter N).
For example:
SLIM 1.230 FiN- single-circuit heating boiler, with a closed combustion chamber, without additional hydraulic accessories.
Features of Baxi SLIM floor-standing gas boilers:
|
Advantages of Baxi SLIM floor-standing gas boilers:
- Boilers with modern design and compact dimensions. The width of single-circuit models is only 35 cm.
- Built-in electronic self-diagnosis system, which allows you to automatically detect up to 10 types of possible malfunctions in the operation of the heating system, which makes it easy and convenient to operate and maintain the boiler.
- The presence of built-in weather-dependent boiler automation with the ability to connect an outdoor temperature sensor allows you to automatically change the temperature of the heating system depending on the outside temperature, which provides a high level of comfort and real gas savings. To create a comfortable microclimate in the room, you can also connect a room mechanical or programmable thermostat to the SLIM boiler.
- Availability of models with a closed combustion chamber. These types of boilers are extremely convenient when it is not possible to organize a standard chimney, as well as when placing the boiler in a living space, for example, in the kitchen.
- Thanks to the continuous modulation of the burner flame, rather than its stepwise regulation, smooth adjustment of the boiler power is ensured, which ensures its long-lasting operation and saves gas consumption.
- The boilers are adapted to Russian operating conditions and are resistant to changes in gas pressure, operate stably at low pressure, producing at least 50% of the thermal power at an input gas pressure of 5 mbar.
- Automatic frost protection, which is activated when the water temperature drops to 5°C. Included in the delivery set for the SLIM boiler model with a power of 62 kW. includes a minimum gas pressure switch, which puts the boiler into standby mode and automatically turns it on when the gas supply is restored. The minimum pressure switch is very useful in winter in case of possible interruptions in gas supply and it can also be used for other models of boilers in this series.
- The presence of two temperature control ranges (30 - 85°C and 30 - 45°C) allows the use of boilers when operating in “warm floor” mode only.
- The heat exchanger sections are made of high quality cast iron.
- Double-circuit boilers have a protection system against the appearance of legionella bacteria in the system, which once a week heats the water in the boiler to a temperature above 60°C, preventing their appearance and ensuring the safety of the consumer’s water supply.
Single-circuit boilers can be connected to Slim UB series boilers with a capacity of 80 or 120 liters with a tank made of enameled or stainless steel. The boiler is made in the same design as the boiler and the temperature in it is controlled either from the boiler panel or from the boiler panel.
Design features of gas floor-standing boilers of the SLIM 1. …i(N), SLIM 1. …Fi(N), SLIM 2. …i(Fi) series
|
Gas system
Hydraulic system
Temperature control
|
Control and safety devices
|
Design features of gas floor-standing boilers of the SLIM HP series
|
Gas system
Hydraulic system
|
Temperature control
Control and safety devices
|
Technical characteristics of floor-standing gas boilers Baxi SLIM HP
| Parameter | Unit change | Heating only | |||
| SLIM HP 1.830 iN | SLIM HP 1.990 iN | SLIM HP 1.1160 iN | |||
| Max. useful thermal power | kW | 82,8 | 99,4 | 115,9 | |
| Min. useful thermal power | kW | 49,7 | 59,6 | 69,5 | |
| Max. thermal power consumption | kW | 90 | 108 | 126 | |
| Min. thermal power consumption | kW | 54 | 64,8 | 75,6 | |
| Maximum flue gas flow | kg/h | 235 | 243 | 359 | |
| Maximum flue gas volume | m 3 / h | 187 | 194 | 284 | |
| Required traction | mbar | 0,08 | 0,08 | 0,08 | |
| Efficiency at 100% power and t=70°C | % | 92 | 92 | 92 | |
| Efficiency at reduced power and t=30°C | % | 92 | 92 | 92 | |
| Losses through the housing when switched off. boiler at Δt=30°С | W | 437 | 505 | 568 | |
| Min. necessary water circulation through the boiler Δt=20°С | m 3 / h | 3,56 | 4,27 | 4,98 | |
| Water pressure loss in the boiler | mbar | 31 | 41 | 53 | |
| Volume of water in the boiler | l | 35 | 40 | 44 | |
| Max. operating pressure in the heating circuit | bar | 5 | 5 | 5 | |
| Max. consumption of natural (liquefied) gas | m 3 /h (kg/h) | 9,5 (7) | 11,4 (8,4) | 13,3 (9,8) | |
| Chimney diameter | mm | 202 | 202 | 252 | |
| Power/voltage | W/V | 150/230 | 150/230 | 150/230 | |
| Height x Width x Depth | mm | 1209x531x1100 | 1209x612x1100 | 1209x693x1130 | |
| Net weight | kg | 364 | 420 | 470 | |
Specialists of the company "Thermogorod" Moscow will help you choose, buy, and install a Baxi floor-standing boiler, will find an acceptable solution at a price. Ask any questions you are interested in, a telephone consultation is absolutely free, or use the form "Feedback"}
Loading...