How to pump water out of a country pool. How to drain water from an inflatable pool. Drain into a pond

If you have already installed a pool and are using it as much as possible, then you have probably thought about how to properly store it after the summer season. Some people stop swimming after a short vacation, others relax at the dacha all summer, and some are not afraid of the cold and agree to take a dip at the beginning of autumn. You might even have heard stories about how you can not disassemble anything at all and leave it on the site until next year. Is it so? Let's figure it out together.

Initially, it is worth clarifying the question: is it possible to leave water in the Intex pool for the winter? The answer is no, unless you want to deal with bowl repairs next year. Our customers have conducted a similar experiment more than once, literally freezing a full bath until next summer, and sometimes this experiment was actually successful, but in most cases people encountered various kinds of problems. The most minor inconvenience is a long thawing in the spring. Imagine a block of ice weighing several tons (and Intex has models with a larger volume) - even in a warm spring, it will not melt for a day or two, and the resulting water will still have to be poured out and replaced - its quality will be unsuitable for bathing. But the main danger in cold weather is the risk of damage to the bowl made of PVC material, which is not intended for low temperatures. In the cold it hardens and can easily break or crack, especially on the folds near the bottom. Remember - liquid expands when it freezes, so ice formed in folds can easily damage the bottom and walls; We strongly do not recommend further verifying this from your own experience. The restrictions do not apply to frame racks - they can be kept in almost any conditions (the metal is resistant to corrosion and low temperatures).

Removing the pool for storage - step-by-step instructions.

1. Drain the pool water.

So, at the end of summer it is better to remove the font. The first question on the agenda: you need to empty the contents. Depending on the size, from several hundred liters to tens of tons can splash inside, and this is quite a decent volume. There are two main methods of draining using different devices:

2. Wash and dry the bowl.

Having poured out the water, we move on to the second stage. If you are the owner of a frame, then there will be no difficulties - by default it is in a straightened state on the racks. It can be easily washed and will air dry on its own. And if you have an Easy Set with an upper inflatable ring installed, then you probably noticed that without water inside, its bowl does not hold its shape and simply falls down. It is better to wash such models before draining them when they are full in order to remove plaque from the walls and bottom. Intex's product range includes straight and curved brushes with retractable holders, as well as ready-made convenient cleaning kits - they are ideal not only for maintaining cleanliness during the summer season, but also for preparing for seasonal storage. After draining, Easy Set should be dried by straightening it in the sun. You can use improvised means and build improvised spacers and hang the material on them - it will dry faster. If you plan to dry on spacers, be careful not to puncture or tear the vinyl in the process.

3. Storage conditions.

And the last stage - we figure out how to store the pool in winter. The bowl should be handled with care - fold it carefully, sprinkled with talcum powder (talc is used to prevent the rubberized material from sticking together), and be sure to store it in a dry, warm room, avoiding freezing. Temperature restrictions do not apply to the frame and components - sand pumps or chlorine generators can easily stand all winter in an unheated garage. The same applies to moisture protection - there will be no problems with storing the frame in a damp room in winter, but if you want to maximize the service life of all parts, of course, it is better to find a dry place for all spare parts.

We hope the article helped you decide how to properly prepare all components for seasonal storage. If you have any questions, call or write to us and the store consultants will answer them in detail. Make your summer vacation as comfortable as possible with the Intex-rus.ru online store!

Getting ready for the summer season: preparing the site for the pool.

How to assemble an Intex frame pool.

Instructions for using the repair kit.

www.intex-rus.ru

How to drain water from a swimming pool? – read in the blog Aquapolis.ru

Sooner or later, an artificial reservoir of any type will require draining the water.

Water is drained:

At the end of the swimming season, if there is severe turbidity and contamination, if its filtration is impossible, if substances hazardous to people get into the water, to eliminate breakdowns and repair coatings when the bowl is overfilled with rainwater

Small portable children's pools do not have a filtration system and therefore require regular water changes. This is easy to do due to the small volume. The water can simply be drained onto the lawn, flowerbed or other convenient place on the site.

Large structures require special devices and equipment, as well as organization of water drainage.

Draining is done:

In the garden drainage pit nearby reservoirs (reservoirs) storm drains central sewerage special pit (septic tank)

Depending on the type and volume of the reservoir, the issue of drainage can be organized in different ways.

How to drain water from a frame pool

A non-stationary frame pool or prefabricated pool is usually equipped with one or two drain holes, which allow for fairly easy drainage.

To empty the bowl:

1. We attach a hose to the drain hole using a special adapter (if the adapter is not included in the kit, you can buy it in a specialized store).
2. We lower the second end of the hose into a water receiver (sewage well, garden watering system, drainage hole, etc.).
3. Open the drain valve.
4. After emptying the bowl, disconnect the adapter and hose.
5. If there is no drain valve, you can use a mains-powered drain.

How to drain water from an inflatable pool

It is very easy to free a PVC inflatable pool from water.

Very small ones can be emptied manually by turning the bowl over onto the lawn.
In medium bowls, water is drained through a regular hose. One end is immersed in the pool, from the other the liquid is sucked into the hose and taken out of the container by gravity using the principle of communicating vessels.
If there is a drain valve, then a hose is connected to it and the water is sent to the selected location (garden, drainage pit).
If the options listed are not available, pump out the water.

How to drain water from a permanent pool

According to the rules, a stationary outdoor pool (in-ground) must have a circulation and drainage system, which is laid in the initial stages of construction. It includes a skimmer, suction nozzles, drains or bottom nozzles. The water will drain out on its own through the open drain hole. Filters also usually have a multi-mode valve that allows water to drain into the sewer. It is enough to select the valve mode (flushing/draining) and ensure that the hose (pipe) exits to the place where the liquid is drained (for example, a pit). After this, we start the filtration system with a pump and monitor the removal of liquid. Please note that using this method the water will be drained to the level of the last suction nozzle. The remaining liquid is drained into the bottom hole or pumped out with a pump.

How to drain water from a Bestway pool

You can empty the bestway pool in the same way as with other models of similar design (see above):

there is a drain valve - open the plug and connect the hose;
partial drainage of water - select the rinse/drain mode on the filter tank tap and start filtration;
drainage is not provided, there is no filter with the tap position “Drain” - pump out the water with an external pump.

A swimming pool is a desirable accessory in the summer season in any area. To ensure that the use of the pool is always comfortable, you need to take care of it - change the water and clean it.

It is ideal to drain the water into the sewer system, if there is one. You won't have to worry about swampy areas. However, in summer cottages there is rarely a centralized sewerage system, so draining large volumes of water can become a problem for users. Large volumes of water are usually treated with chlorine, oxygen or bromine based products. The use of chemical water has a number of nuances and determines the method of disposal/processing of such liquid.

Water is treated with chemicals:

In country houses, it is recommended to drain into a cesspool. But keep in mind that it may not be suitable for draining large pools, because... this may cause it to overflow.
In this case, install a separate water inlet for drainage. The reservoir for water disposal is designed taking into account the volume of the pool (as a rule, the size of the water intake is calculated with a margin). This will allow you to drain the pool whenever necessary.

No chemicals are used:

Organize drainage into natural reservoirs or arrange special ditches to distribute water throughout the area.
Swimming pools can be an excellent source of water for watering plants and the irrigation system of the area. This is especially true for arid zones and areas with problematic water supply.

! The volume of the pool bowl should be less than the volume of the drainage pit or receiver into which the water is drained.
! When connecting to the sewer, the pipes must be sloped so that the water leaves and does not return. The drain pipe must be equipped with a valve.
! Please note that the size of the pipe or hose (diameter) determines the rate of drainage.
! If the water in the pool is treated with chemicals, it cannot be used for irrigation or discharge into ponds or other natural bodies of water.
! Discharge into water bodies is possible only if it does not contradict environmental legislation adopted in the given region.

aquapolis.ru

drain pump, sewerage features

A full-fledged capital pool is still a luxury item that not everyone can afford. However, there are other types of home hydraulic structures that allow you to enjoy cool water on a hot summer day, or rinse off after a bath.

Draining water from the pool is a mandatory stage in the operation of an artificial reservoir.

However, when designing a pool on a site or in a house, one should not forget about such a point as the ability to drain water. This is the most important stage in the operation of an artificial reservoir, without which long-term enjoyment from use is simply impossible. There are several ways to drain a pool. If desired, you can combine them, depending on the possibilities, situations and necessity.

Why drain the water?

Some homeowners with private pools are puzzled by the need to pump water out of the tank. They mainly refer to the filtration system installed. They say the water flows into the bowl is clean. But this does not negate the fact that according to the rules, the liquid in the pool must be cleaned/replaced once a season. However, there are also circumstances that force owners to engage in such procedures more often.

Let's start with the fact that draining water from the pool can be partial or complete. And if you are the happy owner of such a structure, you need to know why this is being done at all.

Incomplete water intake from the pool bowl is required in only a few cases:

During the operation of the pool, dust, leaves from trees, cones and other debris get into it. All this, as well as fat, hair and bacteria, accumulate in the upper layers of water. But if large particles can be regularly caught with a net, then the elusive to the eye remains and falls out in the form of calcium and greasy deposits on the waterline. If such an unflattering rim appears in the pool, it must be removed. To do this, drain some of the water, thoroughly clean the walls and nozzles, remove deposits, rinse and refill with fresh water.
Many pools are equipped with underwater lighting fixtures, which have an unfortunate tendency to fail. To repair them, it is often necessary to partially withdraw water and replenish the volume after replacing the damaged part. To avoid having to deal with such procedures once again, choose illumination products that can be replaced directly in the water.
The pool bowl itself can break and deteriorate. If this happens in its upper part, you can pump out water 5 cm below the breakage site. After completion of the restoration work, water is poured again.
If we are talking about skimmer pools without organized bottom drainage, then partial emptying must be carried out before conservation. This is necessary in order to prevent deformation of the structure in winter, when freezing groundwater begins to compress and affect the bowl buried in the ground.

Draining water from the pool is necessary when repairing (replacing) underwater lamps

Full collection is carried out in the following cases:

Proper preparation of the pool for wintering involves complete pumping out of the liquid. We must not forget about the remaining water in the filtration and heating systems. They also do a total cleaning of all nozzles, elements, walls and bottom to remove any deposits that have formed. It is also necessary to drain water from a frame pool, the walls of which can simply burst from ice pressure in winter. The only exceptions are tanks made of frost-resistant materials.
Restoration of the bottom and bottom parts of the bowl.
There was a dead animal in the pool. In this case, it is necessary to empty the reservoir and arrange a total chemical cleaning with mandatory disinfection.
Major repairs or remodeling of the pool.

How to drain the water?

If you need to completely drain the liquid from the pool, you usually connect the hoses to special drain nozzles. However, this procedure is quite lengthy, especially if the swimming pool is supposed to be emptied.

How to drain water from an inflatable pool? Among all other types of bathing facilities, this is the easiest to do. You can simply open special valves. In this case, the liquid will spread over the area. If you connect garden hoses, you can direct the flow where you want. But how to quickly drain the water? There is a simple way:

wear high rubber boots used for fishing;
armed with an ordinary garden shovel;
the bayonet is pressed into the ground, and the handle is placed on the side of the pool;
They press down on the handle with their foot, the side bends, and the water pours out.

There is one caveat - the water will rush straight onto the ground or paving stones, where the structure stood before all this action.

It is necessary to quickly drain the water from a frame pool if it is disassembled for transportation or when cold weather sets in and frosts can strike at any time. In this case, a hose system is also used. However, automation is used to speed up the process. Without medium-sized sediment, the tank will empty in about 10 hours. And with it, the time is determined directly by the power of the device.

Excess water from the frame pool, if any remains, can be easily removed manually with a bucket, and then you can clean and disassemble the frame itself.

Capital swimming pools cannot be drained quickly, in the usual sense of the word, for technical reasons. Usually their cubic capacity is quite impressive, so even a well-equipped drain into the sewer will not allow the water to be removed very quickly. Yes, and this is dangerous, given the sharp change in internal and external pressure on the walls and bottom of the tank. If all the liquid is taken too quickly, small cracks may appear in the bowl, which over time will cause a lot of problems.

Where to drain the water?

Everyone can figure out how to drain the water from the pool without any problems. Another, and more important question: what to do with all this wealth if you have a swimming pool with a 20 m² mirror in your dacha? Yes, this is not an idle question, but it also has an answer.

You can pump water out of the pool:

You can pump water from the pool into a cesspool

into the sewer;
to a special receiver;
into a natural reservoir;
into a cesspool;
into the stormwater system;
to the site.

To determine the most suitable choice specifically for your case, site, pool, you need to study each option in detail.

Drainage

The most correct and easiest method for constant use is an organized drain for the pool into the central sewer system, this is similar to a water supply system. This option assumes that you will not worry about the fact that the water contains chlorine, softeners, salts and other additives that are hazardous to the environment. All this will be safely removed to the city reception area, where it will undergo further cleaning.

What else is good about using the sewer? You don’t flood your carefully nurtured lawn, don’t poison the flowers planted in the flowerbed, don’t wet your garden to the point of a swamp, don’t quarrel with your neighbors about excess moisture from your territory. But the main thing is that you have no problems with the city SES and other authorities.

Features of sewer drain

How to make such a positive drain on all sides? It is necessary to make a drain hole in the pool bowl itself, like in a bathroom, and then you can drain it without a pump. Drainage pipes are connected to it, which are laid in the ground directly towards the main highway.

Water drainage is well thought out if the diameter of the pipes corresponds to the volume of liquid passing through them per unit of time. The most suitable section is 110–150 mm. Pipes are laid at a slope specified for the selected diameter. The emptying speed is also affected by the distance from the pool to the receiver, as well as the number of turns of the pipe itself. As with home sewerage, try to avoid “wiggles” in the drainage system.

This way you can drain a pool of any type and size. It’s just that for home and capital it is necessary to make a stationary water drainage system, and from an inflatable or frame water can be discharged directly into the sewer hatch.

Important! When connecting automation, carefully monitor the amount of water poured into the system per unit of time.

Municipal laws may provide for the maximum permitted volume of liquid discharged into municipal sewers. You can find out about the restrictions from the relevant organization, and to meet the conditions, select a sump pump of suitable power.

Tap to receiver

What to do if there is no central sewerage system on the site or nearby? But this also happens. There is an excellent option for organizing a special receiver. However, it should be understood that a normal-sized pool cannot be drained into it in one fell swoop in a couple of hours.

The receiver should be located below the level of the bottom of the reservoir. It is even better if, according to the terrain, it is located slightly lower than the place where the pool is actually located.

For the receiver, dig a hole in the ground with an average volume of 1 cubic meter. The pit is lined with bricks so that there are gaps between the blocks. This grate will allow water to seep into the ground freely. Broken bricks and crushed stone are poured onto the bottom for drainage. The receiver cover must be durable. A tube is installed in it to remove air from the pit. The hatch is laid on the hole, fixed, and covered with earth.

The pipe supply from the pool to the made receiver can be carried out either permanently underground or on the surface. Simply in this case, a tube is brought out through the hatch, to which a drain hose will be connected if necessary.

For watering the area

Water from the pool can be used to water the flower beds on the site

If you have a relatively small inflatable or frame pool on your property, you can use the water wisely, you just need to know where to drain it. To do this, hoses and a medium-power pump are connected to the outlet nozzles so that the jet does not turn out to be too strong. This water can be used to water beds, flower beds, lawns, shrubs, fruit trees, wash paving stones in the yard, and so on. But calculate the volume of water so as not to flood your garden into a swamp.

You can simply scatter the hoses around the area and go about your business. This is more relevant for autumn drainage. But again, this is only done with small, children's pools.

Tip: to prevent water from the hose from eroding the soil, place a piece of zinc sheet under its end.

Important! To water the garden or discharge water into the ground, use only water that has not undergone chemical treatment with chlorine, and has not been contaminated with all kinds of salts, acids and other disinfectants, cleaning agents or cosmetics!

Drain into a pond

If you have a river running nearby, a pond, or a ravine hidden behind your property, you can pump water there too. The procedure is no different from dumping it into a receiver or into a garden. The only condition is that the distance to the drainage point does not exceed 25 m, otherwise the water will drain extremely poorly, or not at all.

But do not forget that water can only be discharged into the environment if it is free from dangerous chemicals!

Storm drainage

For owners of a site with an equipped storm drain, the problem of draining an outdoor pool practically ceases to exist. Why flood the site and neighbors, why bother with digging a hole, if a system for draining excess liquid is already ready? Simply lower the sump pump into the pool, run hoses from the reservoir to the drains, and check periodically to make sure the water isn't flowing too quickly.

Water into the cesspool

Some people decide to drain the water from the pool into their own septic tanks and cesspools. In principle, this is possible if the volume of the reservoir does not exceed one cubic meter. Otherwise, the otkhodnik will simply fill up in an instant, and you will have to call a sewer truck to empty the whole thing.

Cleaning

There are many ways to take water from a pool, but you need to know how to purify it so that you can safely drain the liquid into a ditch or garden without harming nature. To do this, organize a pre-cleaning system through overflow wells with a sump and drainage pit. Or they use special filters for waste water in the pool. The latter is even preferable because it does not require digging and spoiling the appearance of a well-groomed area.

vodospec.ru

How to drain water from a swimming pool

When planning and installing a pool, one of the difficult moments is deciding where to drain the water from the pool. With a children's or small frame pool this is not such a big problem, i.e. The water can simply be drained into the garden. But if you have several tons of water, then the garden may simply drown, provided that the home pool needs to be drained quickly.

Where to drain water from a pool at the dacha

1. The easiest way is to drain the pool into a sewer system, if there is one. This is possible even with small frame pools. If you are thinking about how to quickly drain water from a pool, then consider the diameter of the pipes, the correct slope and proximity to the sewer.

2. Drain to the garden

For small pools this is easy to do with a hose. How to drain water from a pool through a hose? – Secure one end of the hose with something heavy in the pool, and lightly blow on the other end (using the suction method). Or pour water into the hose through a funnel to release the air. Water will flow. It is better to drain it in several stages so as not to flood the garden. If you want pressure for irrigation, connect the pump.

This method is suitable if you don’t know how to drain the water from an inflatable pool if there is no drain valve.

It’s even easier if there are drainage holes or ditches where water runs off after rain.

The problem is that pool water can contain a lot of chemicals, so watering the garden with such water is simply dangerous. But small pools usually do not add a lot of chemicals, because... It is possible to change the water in them more often.

3. Draining water into the septic tank

This method will not allow you to completely drain the water from the pool at one time, because... the pits have a limited volume. And it may well be flooded. It’s another matter if you organize a special pit for draining water from the pool, in which it will settle and then go into the ground. This requires costs, but this approach is considered environmentally friendly.

4. Discharge into reservoirs

This is technically simple to organize, but according to environmental regulations it is prohibited. Especially if the pool is filled with softeners, flavors, salts, etc. In addition, you can receive large fines for polluting the reservoir. Therefore, a pool filter is needed here too.

There is an option to drain the pool automatically. This not only increases the drainage speed, but also the possibility of reusing water after cleaning, if there is not a lot of chemicals.

If there is absolutely nowhere to dump water from the pool, you need to:

Dig a trench on your site (let it be 30 m) 70 cm wide and 80 cm deep. Cover it with brick, geotextile and crushed stone (2 cm). Cover the top with slate and geotextile, add soil and plant grass. You will get a container for 16 cubic meters of water.

You may be interested in thermal insulation for baths. Products in this category are presented in Ako-mat.

How to drain a frame pool

The pool has to be drained not only at the end of the season, but also after it overflows with rainwater. Often, pool owners remember about an unprepared drain only when it is time to drain. If you have already thought of a place to drain the water, then technically it is not difficult to drain a frame pool.

How to drain water from an intex frame pool

Intex frame pools usually have two holes for draining water. You can drain the water using a drain adapter. First, connect the garden hose to the adapter and then connect it to the drain hole on the outside of the pool. The adapter will open the safety valve and water will flow immediately.

How to drain water from a bestway frame pool - the same as described in the previous paragraph. In some Bestway pools, the drain neck is located too high, so it is not possible to drain all the water completely. To do this, you will have to remove several racks from the frame.

About draining water and other frequently asked questions in this video.

ako-mat.ru

Organization of drainage of water from the pool.

The construction of swimming pools in private households is very popular today. They are erected both on the territory of the site for seasonal recreation, and indoors, so that you can swim constantly.

Modern water treatment systems and technologies allow you to fill the tank once and for a long time. However, during the operation of an artificial water area, there may be cases when it is necessary to drain a certain amount of water or drain the entire bowl.

Partial or complete draining of water from the pool is carried out:

during mechanical and chemical reading of the waterline;
for repairing cracks in the bowl of stationary and temporary objects;
when preparing temporary structures for winter;
if the contamination of the liquid filling the container is too great.

The issue of drainage is always relevant for home pool owners. After all, even the most modest body of water contains a decent amount of water that needs to be disposed of somewhere, but in larger pools there are simply tons of it.

In the private sector, there are several ways to drain a pool without violating existing standards and spending a minimum of time and effort.

The choice of one or another option should be considered at the planning stage for the construction of such a facility in order to ensure optimal results in the future.

You should take into account indicators such as the final location of discharge, the volume of liquid drained at the same time, and the expected frequency of changes.

Wastewater disposal

Pool bowls can hold different amounts of liquid. The larger the container, the more problematic it is to drain it.

Depending on the size of the tank and the available technical capabilities, there are several options for where to drain water from the pool so that this event does not turn into a test of strength for the owner.

If the site is connected to the central sewerage system, then the issue of discharge is clearly resolved in favor of this option. It is possible to equip such a drain for any type of structure.

It is most suitable for stationary closed and open structures, but seasonal frame and inflatable models can also be emptied in this way. It is only necessary to install a pipeline of the appropriate diameter and connect the pool to the main line.

The presence of ravines, gullies, and natural reservoirs in the area makes it possible to release water from the pool directly there, if the distance from the house to the discharge point is short.

This can be done without additional purification of the liquid. According to sanitary standards, it is considered clean and does not harm the environment.

Another option is to build a special drainage pit of such a volume as to accommodate the required amount of waste. Moreover, to ensure good absorption capacity, the lower edge of the well pit must rest against a sandy or gravel layer of soil.

Used water can also be drained into a septic tank, but it should be connected through a special pit or well in order to prevent accidental waste from entering the pool tank.

It is preferable to use the last stage of the septic tank for discharge and not to overload the system with a one-time release of a large amount of liquid at once.

Water from small structures can be used to water plants on the site, but only if it does not contain chemicals.

Impurities of chlorine and other cleaning agents are harmful to many crops. However, this method is good because it allows you to save money by using the same water twice.

Pool drainage

Many owners are also interested in the question of how to drain water from their pool. Here, too, everything is individual.

For small inflatable and frame structures, a garden hose will suffice, one end of which is connected to the drain hole at the bottom of the bowl, and the other is directed to the discharge point.

If the structure is installed above the receiving tank, the liquid should drain by gravity.

To lower medium-sized temporary and stationary open-type water reservoirs, submersible pumps are used, which forcefully pump out the liquid and transport it to the collection point.

You won't be able to completely drain the pool using this method, but it saves a lot of time. In addition, this is the only option if the artificial reservoir is located below the sewer.

Water drainage in a swimming pool located indoors is carried out only using stationary pumps. They are installed in the technical room during the construction of the facility and are turned on as needed.

It is necessary to completely remove water at the end of the swimming season only in temporary structures. Freezing of water in such a container can cause damage to the housing and premature failure of the product.

And according to the instructions, they are supposed to be stored not on the street, but in a utility room when folded.

In stationary open-type swimming pools, it is not recommended to completely drain the water for the winter. Experts advise that when preparing a facility for winter, first drain the bowl, plug all supply and drain pipes, and then fill the tank 50% with clean water.

This will compensate for the pressure of frozen soil on the walls of the pool and prevent its deformation. For any type of pool, the water drainage system must be thought out flawlessly. Only then will its operation be long and comfortable.

stroitel5.ru

Where to drain water from a pool at the dacha

Where to drain water from the pool at the dacha? For small pools this can easily be done by using a hose directly into the garden. This is of course not a problem if the water has not been chemically treated. But if you diligently used bleach or other substances, then of course the plants in the garden will simply die.

A big plus of small reservoirs is that the water in them is usually not treated with anything. And in the absence of water at the dacha, this is an excellent supply of liquid for watering the garden or washing hands. As for large pools, as a rule, the water in them is practically not changed. Or once every three years. It undergoes mechanical and chemical cleaning daily. But if the need for this still arises, then where can you drain the water from the pool?

ADVICE! You should not drain water from a pond or swimming pool daily or monthly. Since uncontrolled drainage of water into the ground can lead to waterlogging of the soil.

Where can you drain the pool water?

First, let's consider the option that your pool is small and located in a convenient location on a site next to a ravine. Then the pool water at the dacha can be drained into a ravine. This can be done without special permissions. Since the water from the pool, according to sanitary standards, is considered clean. And does not harm the environment.
The second option is the most correct. This is a drainage hole. It is designed at the stage of excavating a pit. The drainage pit can be located under the pool itself or next to it. Its depth should be greater than the bowl itself. In this case, you don’t have to think about where to put the dirty water, but conveniently pour it into the drain. The bottom of the drainage pit should be dirt or sand. In order for the water to be absorbed, it is necessary to drain the water from the pool in parts.
Another option is central sewerage. This is the most convenient way. But you will have to run around to various authorities and get permission. To do this, you must initially have a project for the future pool. This method is used for large public swimming pools. But if your site is already connected to a central drain, then it can be connected to storm drains and drain pipes from the pool without any problems.

ADVICE! Only centralized sewerage can receive large volumes of water. If your pool is located in a country house, then, as a rule, an autonomous sewer system and a septic tank are probably not designed for such a volume. He will simply choke, and the liquid will need to be pumped out immediately.

How to drain water from a swimming pool.

The easiest way to drain water from a swimming pool at your dacha. By gravity. One end of the hose into the water, the other into the drainage area. But this method is for small pools. Even a pool of several cubes will drain all day long.
The second method is using a pump. It will quickly pump out water and save your time. Pumping units are required for large pools. In addition, as a rule, the bowl is installed below the storm drain, and it will not be possible to release the water by gravity. Submersible or stationary pumps empty the pool almost completely. And they can drain both clean and very contaminated water.

Subscribe to updates by E-Mail:

morevdome.com

automatic system, standard, for garden, pond, septic tank

Draining water from a pool is one of the most important processes in its use, so it needs to be thought through in advance. High-quality drainage operation will be ensured only if it fully complies with the type of structure, its location, as well as sanitary and technical standards.

It is possible to arrange several types of drainage of waste water from the pool, each of which directly depends on many factors. Here it is necessary to take into account the contamination of the liquid, its volume, frequency of drainage, and the distance to the water intake point.

Standard water drain

The easiest way to drain the water from the pool is to connect the drain to the sewer. It is possible to organize and arrange everything not only with stationary structures inside the house or capital, free-standing buildings, but also with small inflatable and frame models.

To do this, you will only need to install a drain in the pool itself, make a connection to the sewer system, run pipes and lay them in the right direction and with a certain slope. The liquid will drain faster if the diameter of the pipe is selected correctly and the distance to the sewer is minimal.

Managing pool filtration modes (video)

Draining the garden and beds

When using small pools, such as frame pools or even children's inflatable pools, the discharge often occurs simply into the garden or garden of the land. The task is simplified if the structure is located on a slight slope or next to drainage holes and ditches. Thus, you can simply open the discharge valve or lead the hose from it to the required location, and soon the waste water will flow out of the container by gravity, and you can replace it with clean water.

You can also use a medium-power pump for this process, which will help convert water from the pool into excellent pressure for watering flower beds and beds.

Draining water into a septic tank

Experts do not recommend draining liquid from the pool into septic tanks and cesspools, since literally in one discharge you can completely fill the volume. It’s another matter if the drain is organized into a special pit for drainage, which will be dug to a depth below the level of the tank, and preferably to the sand and gravel layer of soil. In this case, the contents of the structure will drain much faster, and if you use the pit strictly for its intended purpose, it will be able to help you with high-quality drainage.

Pool drainage into bodies of water

From the point of view of organizing such a drain, everything is very simple and even inexpensive, but from the point of view of the legality and ethical standards of a civilized person, it is, of course, worth thinking about. Naturally, it is possible to arrange the disposal of waste water into a river or lake, but only if the liquid does not contain a large amount of chemicals.

Cleaning activities

In this case, it would be a good idea to use special filters for swimming pools, which will be responsible for the purity of waste water, or special settling wells. We also recommend that you definitely communicate with the services in your region that oversee such issues, so as not to run into large fines for environmental pollution.

Automation of the drain system

Automated drainage of water from a structure is possible in any of the above cases, and it is even recommended to increase the rate of emptying of the structure and the ability to reuse the liquid (if it does not contain a large amount of chemicals).

To do this, you should consider special sump pumps as well as filtration equipment. We recommend that you read the material about errors when installing swimming pools.

When I was faced with the problem of removing residual water from a frame pool at my dacha (the drain hole is located high and some of the water remains at the bottom),

then scooping it out once with improvised means was enough to decide to purchase a drainage pump. Moreover, I am building a pond with a waterfall at my summer cottage, and it may be useful to me in the future for supplying water to the top of the waterfall. I chose the DN 110/6 model.

I was satisfied with both the power (200 W), which allows pumping up to 110 liters per minute, and the price of this device. The maximum immersion depth of the pump is no more than 8 meters, which is also suitable for me (my future pond will be of a more modest size), and a pressure of 6 m will allow water to be supplied to the top of the waterfall. So, with this purchase I immediately killed two birds with one stone. The pump is equipped with a float switch,

which automatically turns the pump on and off depending on the water level, so in order to pump out the remaining water from the pool, it had to be fixed at the top of the handle and manually controlled when the pumping process is completed so as not to overheat and burn the engine.

The design of the pump is simple and therefore reliable.

It consists of a pump part and an electric motor. At the bottom of the pumping part there are suction windows for mechanical water purification,

and a special heat exchange chamber ensures cooling of the electric motor, which allows the pump to operate for a long time not completely immersed in water. That is, it is an ideal option for pumping water from a swimming pool, and the permissible particle size of 5 mm allows it to be used in a pond. The pump body material is made of plastic, which significantly reduces its weight (only 3.92 kg). The pipe allows you to connect hoses of various diameters to it.

Partial or complete drainage of water from the pool is carried out:

during mechanical and chemical reading of the waterline;
for repairing cracks in the bowl of stationary and temporary objects;
when preparing temporary structures for winter;
if the contamination of the liquid filling the container is too great.

In the private sector, there are several ways to drain a pool without violating existing standards and spending a minimum of time and effort.

The choice of one or another option should be considered at the planning stage for the construction of such a facility in order to ensure optimal results in the future.

You should take into account indicators such as the final location of discharge, the volume of liquid drained at the same time, and the expected frequency of changes.

Wastewater disposal

Pool bowls can hold different amounts of liquid. The larger the container, the more problematic it is to drain it.

If the site is connected to the central sewerage system, then the issue of discharge is clearly resolved in favor of this option. It is possible to equip such a drain for any type of structure.

The presence of ravines, gullies, and natural reservoirs in the area makes it possible to release water from the pool directly there, if the distance from the house to the discharge point is short.

This can be done without additional purification of the liquid. According to sanitary standards, it is considered clean and does not harm the environment.

Used water can also be drained into a septic tank, but it should be connected through a special pit or well in order to prevent accidental waste from entering the pool tank.

It is preferable to use the last stage of the septic tank for discharge and not to overload the system with a one-time release of a large amount of liquid at once.

Water from small structures can be used to water plants on the site, but only if it does not contain chemicals.

Impurities of chlorine and other cleaning agents are harmful to many crops. However, this method is good because it allows you to save money by using the same water twice.

Pool drainage

Many owners are also interested in the question of how to drain water from their pool. Here, too, everything is individual.

For small inflatable and frame structures, a garden hose will suffice, one end of which is connected to the drain hole at the bottom of the bowl, and the other is directed to the discharge point.

If the structure is installed above the receiving tank, the liquid should drain by gravity.

To lower medium-sized temporary and stationary open-type water reservoirs, submersible pumps are used, which forcefully pump out the liquid and transport it to the collection point.

You won't be able to completely drain the pool using this method, but it saves a lot of time. In addition, this is the only option if the artificial reservoir is located below the sewer.

And according to the instructions, they are supposed to be stored not on the street, but in a utility room when folded.

In stationary open-type swimming pools, it is not recommended to completely drain the water for the winter. Experts advise that when preparing a facility for winter, first drain the bowl, plug all supply and drain pipes, and then fill the tank 50% with clean water.

Some owners of country estates, when designing and building summer pools there, completely lose sight of the issue of draining water - where and how to drain it? Sometimes this issue is put off for later and is not considered important, although it can be resolved during the process of using the pool.

Do I need to drain the water from the pool and when is the best time to do it?
- The answer is yes! Why?
- The answer is no! Why?
- Compromise option
How to drain water from an inflatable pool?
Draining water from a frame pool
- How to drain water from an Intex frame pool?
How to drain water from a stationary pool?
- Tools and materials
- Arrangement of water drainage
- Pit cover
Where should I drain the pool water?
- Down the drain
- Draining water into beds
- Drain into the septic tank
- Discharge into reservoirs

Do I need to drain the water from the pool and when is the best time to do it?

Some pool owners naively rely on a water filtration system, thinking that it can be done without draining at all. But there are circumstances when it is necessary to drain the water from the children's pool:

the water has bloomed or become cloudy;
before the onset of cold weather;
the water has an unpleasant odor;
ingress of an animal corpse or substances harmful to humans into the water.

The answer is yes! Why?

If the obvious reasons described above have not yet been observed, is it necessary to drain the water from the frame pool in such cases? Obviously, yes, for example, at the end of the swimming season. This seems logical, since there is no longer a need for water, and it seems pointless and tedious to continue cleaning the bowl of fallen leaves, acorns or pine cones without the expectation of a subsequent bath. In addition, from mid-autumn, the dacha becomes less and less visited, and frozen water in winter is quite capable of breaking the very bowl of the pool.

The answer is no! Why?

True, there is also the exact opposite point of view, which holds that even in winter you should not completely drain the water from a frame pool. Proponents of this theory justify their point of view by the fact that groundwater near the surface freezes in winter and begins to strongly compress the bowl of a pool deepened into the ground. When it is left filled with water, it, also freezing, compensates for the soil pressure with a counter force and allows you to keep the pool structure intact.

Both of these opinions are quite justified, but then the question of draining water from the pool for the winter depends on the nature of the soil around the pool.

Compromise option

There is another, compromise point of view, according to which you need to leave half the usual volume of water in the bowl for the winter, and not struggle with how to drain the remaining water.

If you have good specialized equipment for servicing swimming pools, then you can completely change the water in them every two to three years.

Since the amount of water gradually evaporates during the operation of filters and heaters, as well as natural evaporation from the water surface, clean water must be added to the pool periodically. Approximately 3% of the water volume is lost in a week. Thanks to this, there is a natural slow renewal of water, which can please owners with purity and freshness longer.

How to drain water from an inflatable pool?

And yet, if you have an inflatable pool, then draining the water from it is not a difficult task at all, and you won’t worry about its safety if you drain all the water in time and store the pool in a dry room.

Video on how to drain water from an inflatable pool:

Video about an alternative method of draining water from an inflatable pool:

Draining water from a frame pool

Most often, the owners of such “hot tubs” begin to think about how to drain the remaining water from the frame pool only at the moment when it needs to be disassembled for transportation or long-term storage. But not only in this case, it may be necessary to drain the water. In summer or autumn there are heavy or prolonged rains that fill the pool bowl. In such cases, if you do not figure out how to quickly drain the water from the pool, it may overflow and the excess water pressure will damage the structure.

In standard designs, drain holes are located on both sides of the bowl. You can choose a solution for how to drain water from the pool through a hose:

First, you need to check your local laws regarding the disposal of used water.
Then you need to connect a garden hose to the most convenient drain hole and check whether the drainage plug is installed correctly on the inside of the bowl.
You need to remove the cover from the drain valve located on the top side of the structure and connect the end of a garden hose to a special adapter (sold in hardware stores).
The other end of the hose is placed in an acceptable water receptacle.
Next, the adapter must be connected to the drain valve.
After attaching the adapter, a drain plug will open on the inside of the bowl, after which you can quickly drain the water from the frame pool.
After draining the water, disconnect the hose from the adapter and insert a plug into the drain valve.
Place the lid on the drain valve on the outside of the bowl.
You need to completely bleed all the air from the inflatable ring and remove all the plugs.

After you have managed to quickly drain the water from the inflatable pool and before folding the structure and sending it to a barn or garage for the winter, the remaining moisture must be absorbed by sprinkling the structure with talcum powder. All valves and plugs must be removed from the pool, carefully rolled up and stored until the next season.

By the way, about the water in the pool. It is better to add as few chemicals as possible to it - both the skin of swimmers and the environment will suffer from them after draining the water.

Video on how to drain water from a frame pool:

How to drain water from an Intex frame pool?

To know how to drain water from an intex frame pool, you need to consider that they have two drain holes. Water can be drained using a drain adapter:

First, the hose must be connected to the adapter.
After this, connect it to the drain hole on the outside of the bowl.
The adapter will open the valve slightly and the water will immediately begin draining.

In bestway frame pools, water is drained according to the same principle. But in some of them the drain neck is located too high, so it is not possible to completely drain all the water at once. In order to find a solution in this case on how to drain the water from the bottom of the pool, you will need to remove several racks from the frame.

Video on how to drain water from an Intex pool before wintering:

How to drain water from a stationary pool?

Even at the stage of planning a permanent pool, you should think about how to drain the water from the pool. The water drainage system is one of the primary tasks, which can be solved on your own.

Tools and materials

To work you will need the following:

tiler's shovel and trowel;
brick;
sand;
cement (“grade 500”);
metal plate 2-3 mm or asbestos 5-10 mm depending on the area of the drain pit. For example, for a pool measuring 2x4x1.5 m, the drainage recess area is 50x50 cm and the depth is 50 cm.

It is important to note that a large pit size implies a larger free area, but the volume of water released per drain will increase.

Arrangement of water drainage

First you need to dig a pit of the required size, adding the width of the brick on all sides of the recess. Brickwork will help strengthen the walls.
The first layer is laid with a gap of 30 mm. The second is done so that the upper level covers the gap between the bricks of the lower layer. For laying, a solution of cement and sand is used, proportion 1:3 - this is how lattice walls are obtained. Through them, water will be absorbed into the ground.
Sprinkle the soil on top so that when digging the soil, do not touch the top cover of the pit.

Pit cover

In the plate prepared in advance, you need to make two holes with a diameter of 50 mm. Pipes are installed in them. One is for air outlet, the other is for a hose to drain water.

The air outlet pipe must be higher than the plane of the earthen embankment.

A plastic pipe with a diameter of 50 mm is suitable for air outlet. The pipe must be attached to the plate.
The second pipe should pass through the hole in the pit cover.
Using bent corners, the pipes are attached to the plate. It will cover the pit before backfilling. The mass of the earth will put pressure on the plate, and the prepared corners are needed to strengthen it. They should be placed on the top layer of bricks under the plate at a distance of 200 mm.
The final stage is laying the plate with pipes.
Everything is covered with earth from above.

The pipes should not move when backfilling; if necessary, they should be adjusted.

All that remains is to compact the earth and fill in the rest of the pit.

That's it. Everything is ready. Now you don't have to worry about how to drain the water from the pool - you just need to connect the hose to drain the water. Drain the water until the pit is completely filled, then take a 30-minute break, then repeat the operation. You need to do this until all the water has left the pool.

Where should I drain the pool water?

Down the drain

The simplest answer to the question of where to drain water from a swimming pool at the dacha is its further disposal through the sewer system. If there is good sewerage on the site, it will not be a problem to equip not only a stationary pool inside a residential building, but also a small frame or inflatable pool on the adjacent site.

If there is a branch of the sewer system not far from the pool, then simply pull a pipe from the pool to it and provide it with a valve. But if the sewerage system has a waste tank of limited volume, then connecting to it may be imprudent.

In any case, the volume of the pool bowl should be less than the volume of the receiver free of waste; in addition, during the draining process, you need to ensure that the level of waste in the receiver does not exceed the upper permissible level.

To connect to the sewer system in the pool itself, you need to connect the drain to it, lay the pipes, maintaining a uniform and sufficient slope.

The larger the diameter of the pipe and the shorter the distance to the sewer, the faster the water will drain.

In this case, the cost of drainage consists only of the cost of purchasing and laying pipes, so it is also more profitable if the sewerage system is located closer. If the drainage is carried out into a drainage pit, then you will also have to pay for the work of the vacuum cleaners, although this is not very expensive.

Draining water into beds

Often the question of how to drain water from an inflatable pool, especially if it is small or for children, is decided in favor of watering the garden. Solving this problem becomes easier if the bowl is located next to drainage ditches, holes or on a hillock.

If you connect a simple watering hose to the drain hole of the pool and stretch it to the watering site, avoiding kinks and tangling, then all that remains is to open the valve and at the same time “kill two birds with one stone”: drain the pool and water the plantings. This option is optimal.

This process can be upgraded by adding a not too powerful pump, which will create the necessary pressure convenient for watering some crops.

But at the same time, you need to remember that if the water in the pool has been treated with chemicals, then for plants it may turn out to be evil, not good.

Therefore, if you immediately intend to use water from the pool for irrigation, then you need to choose a “chemistry” for it that would have a mark on the packaging about its harmlessness to fauna and flora.

Drain into the septic tank

Experts strongly oppose draining water from garden pools into cesspools and septic tanks. The fact is that in almost one such procedure their volume can be completely filled.

A much better option is when the drainage is carried out into a specially dug hole for water drainage, located below the pool itself and reaching the level of the gravel-sand soil layer. In this case, the water will drain from the pit much faster. If this pit will serve only the pool, then with its help you can completely solve the problem of recycling water from its bowl.

Discharge into reservoirs

Such a drain is the easiest and cheapest to organize, however, such a decision can often conflict with the law and ethical standards of the pool owner if he considers himself a civilized person.

Draining into a nearby natural or artificial body of water is permissible only when the water in the pool has not been filled with a large number of chemicals, which often happens when cleaning the pool or using the pool for SPA treatments, including fragrances, salts, softeners, etc.

How did you solve the problem with draining water from the pool? Where and how do you drain the water? Share your experience in the comments - you will definitely help others with your answer.

During the summer. It has a number of unique properties:

easy to install and dismantle:
takes up little space during storage;
inexpensive;
does not require extra physical effort during operation;
placed in any place that can be changed.

But at the end of the swimming season or if it is necessary to carry out a general cleaning of the pool, many people have questions about the correct use of the inflatable pool so that there are no problems with its operation next year. How to drain water from an inflatable pool? Where should I pour it? What equipment do you need to use? Read more in our article.

To drain the water from the pool, you can use a medium-power pump, which will help convert the water from the pool into excellent pressure for watering flower beds and beds. The cost of such a pump starts from 2,000 rubles.

You will need to drain the water from the inflatable pool in 3 cases:

cessation of seasonal operation of the pool;
cleaning the pool due to contamination;

Hence there are 2 ways to drain water:

full;
partial.

If you notice a dirty rim on the walls of the inflatable pool, you can get by by partially draining the water and rinsing the contaminated area. If you find a leak or, then the drain will be complete.

ADVICE! You should not drain water from a pond or swimming pool daily or monthly. Since uncontrolled drainage of water into the ground can lead to waterlogging of the soil.

Draining methods

There are several main ways to drain water from an inflatable pool:

through the valves provided in the pool;
by hoses;
through the side.

It all depends on the design of the inflatable pool and its size. If it is small, you can simply lift it and pour water onto the area. If the pool is of impressive size, then it is better to use hoses, the stream of which can be directed to planting in the garden or to the place you need.

Drain points

Each owner of a country house chooses the place for drainage:

drain;
planting;
pond on a personal plot;
into the sewer;
storm system;
right on the site area.

It all depends on the design of your site and the location of the pool. Some people manage to simply step on the rubber side of an inflatable pool, and the water itself begins to flow out, and when there is little of it left, the pool rises and is freed from the remaining water. So, the choice is yours.

ADVICE! If during operation you treated the water in the pool with chemicals, then you should not drain it onto your garden plot or garden. Your plantings and plants will die.