Choosing a durable and comfortable wooden bed in a store can sometimes be difficult. Often in such products, half of the parts are made of fragile chipboard or an incomprehensible Chinese alloy, so the quality of such furnishings does not always correspond to their cost. If you have a simple carpentry machine, drill, jigsaw and a couple of modern power tools in your garage, then it makes sense to try to make a beautiful one with your own hands. If successful, you will receive a reliable product that can serve your entire family well for decades.
Making a bed with your own hands from wood
- To assemble a reliable homemade wooden bed with your own hands, we will first need planed high-quality boards 25-30 mm thick (up to 2 m long), timber 50x50 mm or 45x45 mm, self-tapping screws 5-6 mm, good glue for carpentry. The dimensions of the workpieces depend on the size of the bed. Typically, standard beds for one person are made up to 2 m long and about 0.9 m wide. Naturally, a lot is decided by the person’s physique or the dimensions of the existing mattress.
- Our drawer consists of several parts - timber, boards and a whole series of rectangular blanks.
- Lubricate the surface of the board with glue.
- We apply a beam to it and tighten the parts with clamps.
- While the glue dries, you can proceed to making the back of the bed.
- We cut the boards on a circular saw into pieces of the required size.
- Cut short bars.
- Next we need to assemble the parts of the bed post into one whole structure.
- Again we use wood glue and clamps to ensure a secure connection.
- Let's move on to the head of the bed. The lower wide ones can have a simple shape, but additional work needs to be done with the top board.
- Even the simplest wooden bed, made with your own hands, should look as beautiful as possible. It is best to decorate the headboard with figured carvings. We apply markings to facilitate this artistic work.
- First, we make the cutout we have planned with a jigsaw or on a machine, and then we process the surface with a plane, milling cutter and sandpaper.
- All back parts are ready.
- We will carry out the assembly using dowels.
- According to the markings, you need to drill holes for the dowels.
- It is best to carry out such operations on a homemade or factory machine; it is much more difficult to perform such actions with a hand tool.
- We attach the boards to the racks and make markings in place, this way there is less chance of making mistakes. In our business, how to make a high-quality and reliable bed from wood with your own hands, mistakes and miscalculations should not be made.
- We insert the dowels into the holes, having previously lubricated the grooves of the workpiece at the points of contact with glue, and hammer them in with a mallet.
- Assembling the headboard.
- You can start assembling a solid wood bed frame with your own hands.
- We assemble the bottom from the slats, and then attach short rectangular bars between them with glue and screws.
- You can temporarily remove the slats and additionally secure the workpieces together with self-tapping screws in critical places.
- Next, we paint the frame and headboards of our bed, made with our own hands from wood, according to the chosen design.
- We transfer all the parts to the bedroom and assemble the finished product.
- We put a soft bed on top, now you can relax on a new high-quality and stylish bed.
We hope that our guide will help you learn how to quickly and easily make a bed out of wood for your bedroom with your own hands. This way you can save a little money and make furniture according to your own drawings, ensuring maximum comfortable rest for yourself or family members.
If you are from that category of people who like to make something, then today we invite you to make a bed with your own hands, using the instructions given in this article. The work of manufacturing a product will not take much time and money if you approach the design process and material selection wisely.
A homemade wooden bed will decorate your interior and reflect craftsmanship and creativity. The furnishings will differ from industrial products, which will add sophistication and uniqueness to the decoration of the room, adding coziness and color.
The cost of furniture structures in stores is constantly increasing, so more and more people are planning to make wooden beds with their own hands. This is a great option that allows you to save your budget and also implement interesting projects. If materials and equipment are available, creating a product becomes an opportunity to obtain high-quality furniture that fits the parameters. Exclusive handmade designs become an unsurpassed element of the interior, emphasizing impeccable style.
The advantage of homemade beds is the adaptation of the item to the interior characteristics. It happens that standard solutions to one degree or another do not fit the layout. Ordering a manufactured product according to individual drawings is more expensive. This leads to the fact that craftsmen decide to implement the project themselves.
Design advantages:
- efficiency;
- ease of assembly;
- environmental friendliness;
- variability of ideas;
- durability;
- the opportunity to realize your own “wants” and wishes.
In addition, it is much more profitable and convenient to make a bed for the country house with your own hands than to buy a structure in a furniture store and pay for expensive delivery. It is enough to buy materials or use available raw materials. The variety of sketches will help you think through your own product, which will ideally suit the interior. You can design your own piece of furniture, combining the necessary elements.
What is better to make it from?
The selection of materials becomes the most important stage in planning. Wooden beds come in many designs. The advantages of using this raw material are its aesthetic appearance, ease of processing and assembly. It is important that most often the types of materials are combined, which makes it possible to create a strong and durable structure. For this purpose, timber and furniture panels are used.
In comparison, metal products are more difficult to manufacture; skills and specialized equipment are required.
At the same time, wooden furniture looks much more comfortable, fills the room with warmth, and also effectively emphasizes the features of the interior design.
From timber
The vast majority prefer to make a bed from timber. The frame of most similar products is made from it. Such raw materials are the most durable, they hold their shape and, when properly processed and used, are not susceptible to cracking or drying out. Depending on the decor, softer or denser wood is selected.
If you plan to make carved elements, it is preferable to choose soft, pliable wood varieties. If there is no need for threading, it is recommended to buy more durable raw materials, the fibers of which are arranged as tightly as possible. Products made from timber provide a fairly massive appearance. They are suitable for high-tech, loft, modern and similar types of interior design.
From boards
Products made from boards are in great demand, as they make the project more economical and easier to implement. It should be noted that it is advisable to make the frame from timber, and lay the boards as partitions in the middle of the product, where the sleeping place will be located.
The material is economical, durable, and, if necessary, easier to dismantle and replace. The arrangement of the logs can be dense, that is, the elements are butted to each other, as well as at a certain interval. Boards are also used to make the headboard and back of the product. Elements of different types and sizes will help create unique and optimal design solutions.
From the array
It is important to understand that solid wood is a processed raw material. This includes timber and boards.
It comes in two types:
- Whole. A homogeneous piece of solid wood.
- Glued. If there are chips or deformations, the canvas is sawed, the damaged area is removed, and then glued together to obtain the required element. The principle is similar to the production of plywood, but wood waste is used for it, and laminated wood requires solid components. This type is more economical.
The advantage of a do-it-yourself solid pine bed is strength and durability. The design is easier to disassemble and assemble.
From logs
A more economical type of raw material, but no less high quality and effective. The principle of assembling furniture is similar to working with boards and timber. Proper processing and installation will help create a durable product. It is preferable to select logs from durable wood species.
This type of material has a natural pattern and will look great as garden furniture. In addition, you don’t have to buy logs; you can prepare them yourself. In this case, it is important to correctly prepare and process the array. Logs allow you to create the most cozy, comfortable and original furniture products.
From shields
Furniture panels are one of the optimal and inexpensive materials. They are glued wooden lamellas (high-grade wood veneer). Wood panels combine the advantages of solid wood, but at the same time cost less than solid wood. Such raw materials are strong, economical, durable, and also decorative.
This material is most often used for making furniture. Not only beds are made from it, but also other products, for example, cabinets, wardrobes, chests of drawers, sofas, etc.
From plywood
The material itself is laminated veneer of various types. Typically, the plywood covering is continuous, so it cannot be partially replaced in comparison with laying boards. In addition, this type does not provide sufficient ventilation for the mattress. There is no orthopedic effect.
A do-it-yourself plywood bed would be a good option for a summer residence. It will cost more profitably, but at the same time it will be less strong and durable in comparison with solid wood and beams.
Where to begin
Product design always begins with drawing up a project. It is important to determine the dimensions of the object and draw up a drawing. Correct calculations guarantee a successful development process. It is better to make notes in a separate notebook, a sketch of the design, indicating the necessary details with calculation of dimensions. You also need to prepare equipment and fasteners in advance.
Schemes and drawings of the bed
We offer examples of drawings of a double bed with indications of dimensions and other parameters.
You can rely on the diagram, but at the same time edit it taking into account the necessary requirements. Furniture structures of other widths are also manufactured using this principle. Design features are determined by the characteristics of the project.
Material and necessary tools
It is important to properly prepare the raw materials first. Usually, stores sell already processed material. The beams are treated with a bioprotective solution. Wooden elements must be planed.
The volume of material is indicated for a double bed.
- 100*100, 50*50 cm, 2.6 m;
- wooden shield 60*240 cm.
- 20 pcs. 25*75 cm by 2 m;
- 6 pcs. 100*50 cm x 2.6 m;
- 4 things. 25*150 cm x 2.6 m;
- 1 PC. 25*250 cm by 2 m, 2 pcs. 2.6 m each;
- 1 PC. 25*100 cm x 2.6 m.
The following tools will help you make a bed:
- circular, miter saws;
- ruler-angle;
- roulette;
- pencil;
- drill-driver;
- hammer, rubber mallet;
- clamps;
- socket wrench;
- fastening material.
Depending on the readiness of the elements, the list of equipment may change. You can order timber already cut to size.
How to make a wooden bed with your own hands
The manufacturing process is largely determined by the design of the bed. Today there are many different variations of projects that allow you to realize the most interesting ideas. These can be structures with side backs, podiums, two-tier or classic products.
A single bed is a good option for a summer residence
A do-it-yourself laminated chipboard bed is a universal design for a country house. Such an element will not take up much space, does not require significant effort during assembly, and will serve well for many years. But it is important that laminated chipboard itself cannot be cut. Therefore, if you want to decorate the headboard with carvings, this type of panel will not work. A bed with a width of 75–100 cm is called a single bed.
A do-it-yourself single bed most often includes a frame made of stronger beams. The backrests can be made of laminated chipboard, and the sleeping cover is made of plywood. This method involves a minimum of financial expenses, and the design will be light enough for trouble-free movement.
Making a bed from chipboard with your own hands is quite simple, and if the materials have already been sawn, it will not take much time and labor. We will look at the principles of assembly below.
Single bed - a universal design option
If more space is required, the one-and-a-half type will be optimal. This bed has a width of 150 cm. Production materials can be timber, plywood, chipboard, fiberboard.
Expensive wood is rarely used for such purposes. For dacha use, it would be optimal to make a bed from plywood yourself.
How to make a double bed
You can make a double bed with your own hands according to these step-by-step instructions. The width of the product is 140–200 cm.
Manufacturing process:
- The frame is being assembled.
- The height of the legs is determined. The height of the side parts is added to it. The resulting length is cut from a 100*100 cm block. These will be the legs, so you need 4 elements. At the required height, fasteners for the side components are mounted with screws.
- The width of the sleeping area is determined. 2 boards measuring 50*100 cm are cut, they should be equal to the width of the mattress, but you need to add 2 cm for normal filling of bedding. Add 2 cm to the length of the mattress, saw off 2 more strips 50*100. We mount all 4 boards to the fasteners on the legs. For a double bed, one longitudinal partition is provided in the middle of the product so that the side beams do not burst.
- To make the base, boards 25*75 cm are needed. Fastening is done approximately every 7 cm. This will allow the mattress to be ventilated and also provide shock absorption.
This is one way to make a wooden bed.
A bed with drawers is a practical option
Recently, functional furniture has been valued, providing the ability to store a large number of things. This way you can design a bed with drawers with your own hands based on a regular project.
A taller design is provided with guides installed in the legs. They allow you to organize pull-out cabinets. The product is optimal not only for the garden, but also at home, as it performs the functions of a chest of drawers.
Decorating the finished bed
Finishing the structure is the final stage of construction.
Stages of work:
- Cut 2 strips along the width and 2 along the length of the product. To do this, you will need a board 20*250 cm. Glue the elements along the perimeter of the structure in the appropriate places so that the top of the component coincides with the top of the beam-legs. You need to secure them with clamps and wait until dry. You can screw the boards with self-tapping screws and then install furniture plugs.
- For the top side you will need a board with a width equal to the width of the leg block with the thickness of the finishing panel (glued or screwed element). Saw off 4 boards of the required parameters. Smooth bevels are cut along the edges at 45 degrees.
- The wooden frame is reinforced with stiffening ribs. A 50*50 cm beam is used. It is necessary to saw off the panels according to the height of the side parts. You will need 20 elements. The parts are secured to the base of the structure with self-tapping screws.
- Then the top strips are installed.
- The remaining joints must be filled with wood mixture. Afterwards the bed is sanded to smooth out any unevenness. Then you need to walk over the structure with a soft brush to brush away any sawdust.
Using modern tools, you can develop a unique bed design with your own hands.
For painting, stain or special paint is used; to protect the surface, it is varnished.
Making a wooden product is not such a complicated process. The main thing is to think through the design, rely on the correct drawing, and also have high-quality tools and skills.
If you have any questions, require any clarification or clarification, write in the comments below.
A bed is an essential attribute in every home, but the quality of some pieces of modern furniture leaves much to be desired. Therefore, it very quickly becomes unusable and has to be replaced. There are often cases when the mattress can still be used, but the bed frame itself has already become unusable. But making furniture is not so difficult, and in this article we will look at how to make a double bed from wood with your own hands.
An important point that is responsible for the durability and appearance of the bed is the material it is made of. After all, it is low-quality material that causes the product to quickly begin to break even with careful handling and the low weight of those who use it.
That is why you need to choose the highest quality and durable wood for your bed. It is better to immediately exclude coniferous species from the list of materials, since they do not have sufficient strength.
Of hardwood, not all options are suitable for you either, especially if you are just starting out in carpentry. It is best to choose affordable and durable species such as ash, oak or beech. Based on the combination of quality and price, the best option would be an oak bed. Oak has a beautiful color and texture, so with this bed your bedroom will look very beautiful.
Detailed drawing of the bed. Click to enlarge
Also try to avoid exotic types of wood; they are not only expensive, but also require special skills to work with. Therefore, working with them if you are a beginner will be quite difficult. In addition, you should not make a bed from chipboard; this material does not react well to direct load and crumbles, so it is best suited for cabinet furniture.
Columns
Of course, making a bed with your own hands at home will not be very easy, especially if you want it to look beautiful. But this is a completely doable task if you put in a little effort and work carefully.
The initial stage of work is the manufacture of columns. Their sizes, in principle, can be varied, depending on the thickness of the workpiece you have and what kind of bed you want to make. The thicker the columns, the more solid and reliable the bed will look, but it is worth remembering that everything is good only within reasonable limits.
As you can see in the diagram, there is nothing complicated in processing the column. You will just need to cut out two narrowings and make two nests to secure the side drawers. Additionally, on the two columns that will be located at the head, you also need to make two grooves each to secure the shaped tab. After all, wooden beds are distinguished by their simple and reliable design, so making them with your own hands from scrap materials is not very difficult.
Before you start cutting, make all the nests on the columns. In particular, this applies to the nests for the backrest, which will be at the headboard, since marking them accurately after you cut out the narrowings will be quite problematic. In addition, you need to make holes at the upper ends to attach the canopy.
Gluing is done if you do not have a solid block
Select the drill diameter according to the bolt size
Use electrical tape to determine the depth of the hole
The most difficult moment in this design will be cutting out the narrowing. If you can handle the short side without much difficulty, then you will have to work a little with the long side. The most important thing is not to rush and make the markings accurately so that all the pillars for the canopy are symmetrical.
Updated:
2016-08-30
Making a wooden bed with your own hands may not be the easiest solution, but it is the most profitable. At the moment, almost all such furniture products are very expensive, so it would be advisable to purchase the necessary materials and make a wooden bed on your own. Of course, this will require tools and some skills, but the simplest model will require patience and basic skills in handling tools. In any case, almost everything that is needed to make a comfortable wooden bed with your own hands will be described below.
Before you start assembling a wooden bed with your own hands, you need to decide on its future dimensions, location in the room and other nuances. This is necessary for the rational distribution of materials and own forces.
It's best to start with a diagram that you can draw yourself or find in furniture-making literature. In the books you can find not only photos of the final look of the furniture, but also step-by-step design, assembly and some tips. Video can also be a great help.
Wooden beds, like any other, must have a mattress. This design element is the most important, since comfort during sleep will depend on it. If you don’t pick it up in advance, it simply won’t fit or, on the contrary, it will “ride” in a niche. Accordingly, this will cause discomfort, and very strong.
There are two options for solving this problem: order a mattress in advance or make a bed with your own hands from wood and only then start looking for a suitable mattress. Whichever option is more convenient should be chosen, but the first one is much simpler because it will save time. In any case, before you make a wooden bed with your own hands, you need to decide on the size of the mattress.
Materials and tools
After all the preparations, you should acquire the following tools for work:
- sanding machine or sandpaper;
- wood hacksaw, jigsaw or circular saw;
- hammer with rubber striker;
- hammer with an iron striker;
- square;
- screwdriver or Phillips screwdriver;
- drill;
- tape measure, ruler, level;
- chisel.
With materials the situation is a little different. In order to assemble beds with your own hands, you will need a certain type of wood. The most suitable ones are walnut, mahogany and beech. But such expensive breeds are not affordable for everyone, and they are not suitable for beginners, since they will end up with too much garbage. The most affordable option is pine.
Do-it-yourself wooden beds can be made from a variety of wood species, but cheaper options are also suitable for the first time.
The materials required for the structure are:
- pine wood preparations;
- screws;
- varnish coating;
- stain;
- wood glue.
After all the materials and tools have been collected, you can begin to work.
Assembly sequence
A lot depends on the work plan. Do-it-yourself drawings will have their own nuances that will have to be taken into account during the work. The simplest design is a regular frame on 4 legs with a niche for a mattress. Even making a double bed with your own hands can be done quite quickly if you have certain carpentry skills.
For the frame we will need several bars and boards of different sizes, namely:
- 2 beams 100x100 mm, length 2.6 m;
- 2 beams 50x50 mm, length 2.6 m;
- approximately 12 boards 25x75 mm 2 m long;
- 5 boards 50x150 mm, 2.6 m long.
The work order will be as follows:
- A beam with a cross-section of 100x100 is sawn into blanks for legs. 2 blanks should become the back legs of the bed, and 2 should become the legs at the head of the bed. The dimensions should be compared with the drawings, but most often the legs at the headboard are twice as high as the back ones.
- Grooves are cut into the legs on both sides 50x150 mm - for the longitudinal boards of the frame and the transverse ones (for attaching the legs).
- On one side of the legs, chamfers of 1 cm are removed at the ends.
- Next comes the assembly of the frame. It is worth noting that the length of the frame should be slightly longer than the length of the mattress by about 5-6 cm, and the width by 10 cm;
- Boards 50x150 mm are cut into blanks. 2 - along the length of the bed and 3 - along the width. All resulting parts are ground smooth.
The first thing to assemble will be the frame. It works like this:
- The transverse sides of the bed are connected to the longitudinal boards. Everything is held together with glue and screws.
- The base for the cross boards is cut out of 50x50 timber. It is attached so that the niche for the mattress has a recess of 3 cm.
- 25x75 mm boards are laid on the base, which correspond to the internal width of the frame and are secured with screws.
- The last boards to be installed are at the headboard.
Afterwards, the entire homemade bed is sanded several times, treated with stain and varnish.
Another option on how to make a bed is presented in the video.
- Before making a bed out of wood, it is necessary to check all the wood for defects.
- It is necessary to acquire spare materials in case of incorrect processing.
- We must not forget that even if you do something according to the instructions, the result may not be exactly what is shown. It is necessary to check the sequence of work or change the action plan.
Conclusion on the topic
As it turns out, making a bed out of wood with your own hands is quite simple if you follow all the instructions and sometimes consult with the craftsmen. In addition, you can not only assemble beds with your own hands, but also beautifully decorate them to match the style of the room. For those who are interested in how to make a wooden bed more attractive, some books with photos on decorating wooden products can help.
Loading...