DIY polypropylene pools. Construction of a swimming pool, how to build a swimming pool from polypropylene with your own hands Polypropylene bowl

For a summer cottage or simply as an inexpensive option for a country house, a plastic pool with stairs is suitable. They have no seams, and DIY installation is extremely simple. When choosing a tank, you definitely need to pay special attention to the quality of the material, size, shape, wall thickness, and the presence of stairs.

Among the advantages of this material are practicality, durability and the ability to install plastic bowls directly on open ground with your own hands. This is done if the pool is located outside and if the groundwater level is high. Accordingly, installation can be done with your own hands, without resorting to the help of craftsmen. You also won't need a concrete mixture. You just need to install a special cushion to make the plastic bowls more stable. Everything is extremely simple and easy. Another positive feature of plastic pools is their resistance to various chemical and physical influences.

Reasons for the popularity of plastic construction

Many summer residents opt for plastic structures, guided primarily by the properties and characteristics of the material used in the manufacture of the pool container.

Among them, the main advantages of such structures include:

Immunity to ultraviolet radiation. Even with prolonged exposure to open sun, plastic bowls demonstrate resistance to fading.
Solidity. Since the bowl design has no seams, this has a positive effect on the strength and reliability characteristics, guaranteeing a complete absence of leaks.
High durability and immunity to many chemical influences. This allows plastic structures to faithfully serve the owner for decades, without requiring repairs or routine maintenance.
Fast and easy installation. Even a person who does not have special skills and complex technical devices can install the bowl.
Resistance to temperature fluctuations.
More affordable price compared to classic options. This factor largely becomes decisive for most buyers, because even owners with the lowest budget can afford to purchase it for their summer cottage.

The range of plastic materials has increased significantly in recent years, but most often manufacturers use propylene for the manufacture of such products, explaining their choice by its following properties:

Environmental friendliness. Even during long-term use, this material does not emit substances hazardous to health.
Polypropylene does not react with chemicals, including household chemicals.
Special processing of the material using simple and high-tech methods allows it to be used to produce bowls of different configurations, depths and dimensions.
Wide selection of colors. The owner has the opportunity to purchase a structure of the desired color, and after installation, repaint the bowl in any desired shade.
The material has low thermal conductivity. This means that the water temperature will remain unchanged for a long time without the need to heat it.

The listed advantages once again prove that choosing a plastic pool will not bring disappointment to the owner.

Types of plastic pools for summer cottages

Prefabricated (slightly larger than monolithic and consist of several parts).

They are divided into:

composite pools;
frame pools.

Monolithic (have a solid bowl made at the factory).

Nuances:

the second type of product is assembled by mechanical assembly, and the parts of the first type are welded together;
in this case, monolithic pools are landscaped on a specially designated area in a foundation pit, and prefabricated pools - on the surface of the ground;
prefabricated plastic pools, if necessary and in bad weather, can be disassembled and stored in a utility room, while monolithic ones will remain in place;
The second type of pools in winter involves draining the water.

Construction stages

Choosing a location for the tank

Before building an artificial pond, you need to choose the right place:

The tank is installed on a level and flat surface, preferably away from large plants.
If you plan to install a buried reservoir for which a hole is being dug, it is necessary to determine the depth of the underground water.
The bottom of the reservoir cannot come into contact with it (the minimum distance between the bottom and groundwater must be 20 cm). If this condition is not met, groundwater will gradually begin to destroy the frame of the bowl.
Liquid in an open reservoir in the bright sun stagnates and quickly becomes dirty. Therefore, it is necessary to take care of the water filtration system.
For modern outdoor ponds, mounted skimmers are often used. Through them, water is circulated and purified from debris.

We carry out calculations

Once you have chosen a suitable location, you can begin making calculations. The hole should be dug with a margin of 20 centimeters on each side. The depth should be calculated based on the depth of the pool itself and its base cushion.

The base is installed 20 centimeters thick if the soil is sandy or gravel. If there is clay soil under the pillow, then the thickness of the foundation should be 25 centimeters.

Next, sketch out how water pipes, electrical wires and the tank’s own communications will be supplied. Note where the filter will be located, how much space it will take up and how to connect to the bowl.

Pit preparation

To begin, mark the boundaries of the hole on the ground with a shovel or a special spray can. Measure everything again and make sure that no errors were made in the calculations and markings. You can dig a hole yourself, with a team of workers, or using special equipment. It all depends on your preferences, timing and budget.

Laying the foundation

When the pit is completely ready, all measurements have been taken again and no errors have been found, you can begin laying the foundation for the future bowl.

The first layer of crushed stone is laid in order to level the site. We level it using a flat board with an attached level. Next, we compact this layer with special equipment. If you don’t have this at your disposal, then you can try to stamp it down as tightly as possible.

Next, along the perimeter we prepare formwork for pouring concrete 15-20 centimeters high. The concrete layer can be installed without reinforcement, but if possible, then the extra rigidity of the foundation will not hurt. We pour the foundation and let it dry and completely harden for 3 days.

The third and last layer is polystyrene foam 3-4 centimeters thick. After laying it, you can consider laying the foundation completed successfully.

Installing the bowl

A plastic or composite monolithic bowl is placed on a prepared base with an equal margin on each side.

There are several ways to place the bowl in the hole. It depends on its weight and size. If the bowl is small or medium-sized, then it can be installed with the help of a small but friendly company. Large tanks will require the use of a tap.

Connecting all systems to the bowl

After all communications have been completed, we check all systems for leaks and fill the pool to 10 centimeters.

Strengthening the pool in the soil

When filling the pool, we gradually fill the gap between the bowl and the ground. We need water in the reservoir to maintain pressure from the inside and prevent the bowl from deforming under the weight of the earth.

There is also the option of concreting the side walls of the pool. Water will not be able to compensate for the pressure of concrete from the inside, so they use supports made of wooden beams, as shown in the video below.

We trample down the soil near the walls of the pool to compact it. You can also use a special tamping device, but you need to be careful with it so as not to damage the pipes connected to the bowl.

Often, when independently installing plastic pools in the country, consumers limit themselves to forming a “sand cushion” and foam formwork around the perimeter of the bowl, but pool manufacturers advise following the above process. After all, an uneven surface and lack of a cement frame can cause cracks to appear in the pool.

Prices for plastic pools

The cost of polypropylene pools depends on the shape and size. So, a standard rectangular bowl costs 4-2.5-1.5 from 70 thousand rubles, the cost of a round pool with a diameter of 4 m exceeds 80 thousand rubles, children's plastic pools can be purchased for 10-15 thousand rubles.

In the regions, prices for plastic pools differ from those in the capital. In particular, in Samara, the cost of the cheapest plastic pools (4-2.5-1.5 rectangular shape) varies in the area 30-50 thousand rubles, the same prices are fixed in Chelyabinsk, but in Voronezh you will have to pay no less for a domestic plastic pool 50 thousand rubles.

Problems of construction and operation of swimming pools

Ensuring the waterproofness of the swimming bowl is the main task that must be solved when building a swimming pool. When installing prefabricated structures, this problem is solved using a special film made from reinforced polyvinyl chloride. When constructing concrete pools, sometimes they play it safe and also use this material. However, if the technology of concreting the walls and bottom is followed, this is unnecessary.
Ensuring water purity is an equally important task. Properly organized water circulation, which is cleaned by installed filters, allows you to achieve clean water. With the help of a sliding or removable cover it is possible to protect water from leaves and insects.
Increasing the duration of the pool operation season beyond three summer months. This is achieved by installing water heating in the pool. Also recently, light canopies have been installed over swimming pools, allowing them to be used for six months.

If you want to enjoy your swimming pool, you will need to regularly care for it and keep it clean.

To care for it you can use the following methods:

Mechanical cleaning. Typically, owners who decide to build a plastic pool on their property have to deal with pollution in the form of leaves, insects, sand and dust falling into the pool, as well as various debris blown by the wind. This means that in order to keep the pool clean, namely its water surface, it will have to be regularly cleaned of such contaminants. The mechanical cleaning method often has to be used when it is necessary to drain water, as well as in preparation for the new season, immediately before filling the bowl with water.
Water filtration. In addition to large debris, the water may contain small, suspended particles and semi-soluble contaminants, which can only be effectively removed with the help of special filters. There are several types of filters designed to filter pool water, which today are available in three versions: diatomaceous earth, cartridges and sand.
Disinfection. The essence of this method of purifying water from bacteria and biological pollutants is the use of chemicals. The most effective methods are chlorination, bromination, and purification with active oxygen.

In recent years, the number of owners who have decided to install a plastic pool in their summer cottages has increased significantly. This trend can be explained not only by the fact that these structures allow you to create a unique relaxing atmosphere in your dacha or in the yard of your own home. These products have undeniable functional and practical advantages that will bring not only significant benefits from their use to the owner, but also a lot of pleasure.

Among Russian summer residents there are probably many who would like to have the opportunity to relax next to a body of water. If earlier one could only dream about this, today every owner can achieve all this. This opportunity is provided by plastic pools for summer cottages, which have simple installation technology and are very easy to operate.

I found it on the Internet, there are all shapes, colors and sizes.
I liked the round one, diameter 6m, depth 1.5, price including delivery and installation 150,000. Maybe someone has used such a thing, please share your experience!
Here is a photo w w w drbass.ru/nashi_raboty
This is how they praise themselves:
Fifteen reasons - Build from Polypropylene
Very low heat - steam - gas permeability - (At the pool construction stage, no thermal insulation materials are used, because the low thermal conductivity of the polypropylene bowl helps maintain a stable water temperature, this allows you to keep the pool water warm for a long time, saving energy and coolant. That is, you you do not heat the earth, air and concrete, but only water).
It has high mechanical and impact strength, resistance to repeated bending - (The strength of polypropylene and its resistance to seasonal temperature changes characteristic of the Russian climate guarantees the long-term operation of a pool installed outdoors).
The polypropylene bowl does not require any additional finishing or cladding - (Polypropylene is produced in Western Europe and is intended specifically for the production and construction of swimming pools. The pool structure made from polypropylene does not require further lining of the bowl with special tiles or film, since the inner surface of the polypropylene pool bowl is already finished appearance. The surface is of a pleasant color, easy to clean, resistant to chemicals and dyes, does not become slippery when wet, and is injury-proof).
Polypropylene is extremely resistant to aggressive environments: alkalis, acids, ultraviolet rays - (Polypropylene does not enter into any chemical reaction. It is easy to clean, does not fade, does not lose its original color and brightness, which leads to resistance to fading and abrasion for up to 20 years Due to this, you don’t have to worry about the appearance of your pool when choosing chemical cleaning and disinfection products for pool water).
The material is resistant to High (+300) and Low (-70) temperatures - (Which allows owners of both indoor and outdoor pools not to drain water in the winter, as well as use the outdoor pool as a winter skating rink).
The pool bowl is 100% tight - (Due to the manufacturing technology and the unique properties of the material, the pool containers acquire perfect tightness and waterproofing of the bowl).
The surface of polypropylene prevents the appearance and proliferation of fungi, algae and other organic compounds on its surface - (This property of polypropylene makes it ideal from the point of view of disinfection and reduces the cost of purchasing and using special chemicals for the pool by a hundredfold).
Wide range of color options - (The polypropylene used today has many different colors and shades: light blue, blue, dark blue, white, green, light green, gray. The color of the material is voluminous. Color fastness is at least 20 years. The color does not neither temperature (both high and low) nor ultraviolet rays have an effect).
Latest Technology. To manufacture the bowl of polypropylene pools, modern technology is used - “Polyfusion Welding” - (The technology of cutting and welding polypropylene allows you to make pools of almost any shape and size. These can be small pools or plunge pools in the basement of a cottage, as well as outdoor pools of a much larger size, located in the garden and organically integrated into the architectural layout of your site, a plastic pool can be installed not only on the site, but also on the ground floor of the house, in a bathhouse or sauna. Thanks to polypropylene, even the wildest imagination of an architect and designer can turn into a real swimming pool. dachas of original form).
The set of equipment for propylene pools can be the same as for reinforced concrete ones - (At the same time, 100% tightness is maintained, sealing of embedded parts (skimmers, return and hydromassage nozzles, flanges, countercurrents, underwater spotlights, air massage plateaus) is carried out directly in the polypropylene sheet and using special gaskets and bolted connections).
The technology for manufacturing a pool from polypropylene allows you to reduce the cost of manufacturing a pool by 1.5-2.5 times, in relation to traditional technologies - (Think for yourself, why pay dearly for the technology of the past, when it is two to three times cheaper to build a pool using a new one European technology and even with a margin of safety and quality?)
In terms of price-quality ratio, polypropylene pools are optimal, and their quality and functionality pleasantly surprise the most demanding users. In addition, the company provides a full range of swimming pool construction services, from competent initial consultation to turnkey delivery of the finished pool.
A polypropylene swimming pool is delivered to the customer on a turnkey basis with a complete water treatment system within 7-14 days - (the shortest time frame for constructing swimming pools in the world today).
Polypropylene is an environmentally friendly, hard and durable plastic. Produced specifically for the manufacture of swimming pools in sheets and rolls from 4 to 15 mm, of various colors, today used in Western Europe.

We are more often accustomed to hearing about polypropylene pipes than about swimming pools, but polypropylene swimming pools are gaining increasing popularity due to very important characteristics:

Pools made of polypropylene have perfect tightness - this is extremely important, since any experienced builder knows how difficult it is to ensure the tightness of a pool if it is made, for example, of concrete.
Polypropylene is resistant to sunlight (ultraviolet rays), so it does not fade and retains its original color for a long time (ordinary plastic fades quite quickly in the sun).
The material is not afraid of temperature changes, which makes it possible to install pools in both southern and northern latitudes of Russia.
A polypropylene pool can be made of any reasonable size in a short time, usually in one to two weeks.
Relatively low price compared to pools made from other materials.

It’s great when the pool is installed not in the bathhouse itself, but in the yard. In this situation, you can not only plunge into it after the steam room, but also simply lie down in the summer heat.

Pool made of polypropylene in the yard

The pool is equipped with a technical compartment for the necessary equipment.

Another option is an open polypropylene pool with handrails and a high side on which it is comfortable to sit.

There are options for finishing the pool using natural materials, such as wild stone.

In this case, only the thicket itself is made of polypropylene.

A small pool decorated with decorative bricks looks very nice.

Swimming pool finished with decorative bricks

Swimming pool inside a bathhouse or sauna

Due to the fact that polypropylene pools are made of any size, you can order a pool the size of an ordinary plastic bathhouse.

Small plunge pool

If space allows, you can install a more impressive pool.

If desired, you can install a polypropylene pool yourself, remembering to follow the installation technology.

DIY polypropylene pool installation

During the installation of a large polypropylene pool, you will need to create a reliable foundation: the mass will be more than significant and in order to avoid the effects of heaving forces, it is necessary to pour a reinforced concrete slab, and also protect the walls of the bowl with a concrete frame.

Preparing the foundation

The size of the base for a polypropylene bowl should be larger in all directions by at least 20-25 cm. Moreover, make the pit itself, which follows the shape of your pool, even wider - you will need to install more formwork panels around it.

The depth of the hole depends on how much the sides of the pool will be recessed: they can either be made flush with the ground, or some part can be left above ground level. But we must not forget that you will need to add a layer of gravel and sand underneath. Each layer is at least 10-15 cm thick. There must also be a concrete slab on top, the thickness of which is at least 20 cm. This means that the depth of the pit will be equal to the distance over which you dig the pool, plus 45-50 cm to create the foundation.

The first stage of installing a polypropylene pool with your own hands is earthwork: digging a pit. Then gravel and sand are poured and compacted

After the pit has been dug, the soil at the bottom is leveled and compacted. Then gravel or construction waste of medium and fine fractions is poured. All this is being compacted. Moreover, it is better to use a vibration platform. You won't be able to make anything worthwhile with homemade decks and shovels. Then a layer of coarse sand is poured.

Preparation of the reinforcing belt

The next stage is laying the reinforcing belt. If the soils are not prone to heaving and the groundwater is close, you can get by with one reinforcement belt. Otherwise, you will need to knit two layers of reinforcement. One from the other at a distance of 10 cm.

The bottom row of reinforcement is laid on the brick halves. This way the steel rods will be hidden deep into the concrete (minimum distance from the edge of the slab is 5 cm), which will protect them from oxidation. In the pit, reinforcement is laid lengthwise and crosswise in increments of 20-25 cm. It turns out that the entire bottom is lined with reinforcement in a cage. At each connection point, the reinforcement must be tied. For this they use

Reinforcing the base is painstaking work

If a second belt is needed, tie a vertical rod 10-12 cm high at each intersection. Then a second reinforcement belt is tied to these posts. The work is long and painstaking. But the foundation turns out to be reliable.

At this stage, pipes for the bottom drain are secured in the fittings. It is available in almost any pool. If this is not done, the water will have to be pumped out using a pump. Although, the decision is yours.

Pouring concrete

The base for the polystyrene foam pool is poured with concrete and crushed stone. The proportions are standard: for 1 part of cement (grade no lower than M300), take 2 parts of sand and three crushed stones. Water - a little less than one part. All this is mixed and poured into the pit. The layer must cover the upper reinforcement belt by at least 5 cm. To improve the characteristics of concrete and its uniform distribution, use

With this composition, the base will mature for at least 28 days. You can speed up the process several times if you use additives that accelerate the setting of concrete. Using them requires less water, and further work can begin in about a week to a week and a half.

Bottom insulation

Since in most cases, for comfortable bathing, water needs to be heated, install. In order not to unnecessarily heat the earth, you need to insulate the bottom. For this, high-density extruded polystyrene foam boards are used - at least 35 kg/m2.

Installing and filling the bowl

A polypropylene pool bowl is lowered onto the finished and insulated base. All the necessary pipes are connected to it: drainage and water supply, lighting (if any). Afterwards, work is carried out on the thermal insulation of the walls: they are also covered with polystyrene foam.

External formwork is then installed around the pool. In general, the reinforcement ribs are the welded ribs on the walls of the bowl, but for greater reliability, you can drive the reinforcement vertically in increments of 20 cm and make transverse reinforcement in two or three tiers. The number of belts depends on the height of the walls. Step - 20-30 cm. Then the solution is poured inside the formwork.

After the concrete has set, the formwork is removed. No waterproofing work is carried out when installing a polypropylene pool: it is not afraid of moisture. The distance between the wall of the pit and the pool is covered with soil and compacted. The last stage is finishing work. A considerable number of options are shown in the photographs.

This video shows the entire process from digging a pit to finishing. But the foundation was not reinforced. Also, the walls were only covered with sand, without pouring concrete. For large pools, this is a controversial decision: when heaving, the walls can bend and also destroy the slab. This option is suitable only on non-heaving soils with low groundwater levels and little precipitation in the autumn-winter period. But basically the process is clear.

Inexpensive polypropylene swimming pool for cottages and baths

All these difficulties with pouring the base and walls are relevant for large pools. If you want to install a bowl 3*4 meters or so, you can make an economical installation option.

Digging a pit and installing a leveling pad cannot be avoided, but the rest of the work is much less. The depth of the pit is 20-25 cm larger than what you need to bury the bowl. Along the perimeter you need to make the pit wider by about 20 cm. It is advisable to make the walls even. The work procedure is similar:

Then the polypropylene pool bowl is carefully lowered into the pit. If desired, it can first be covered with polystyrene foam boards. The bowl itself has good thermal conductivity characteristics, but to retain maximum heat, it is better to additionally insulate the walls. The boards are glued, the joints are foamed and/or sealed with tape.

Now you will need: a hose with water, sand, long poles of decent thickness. At this stage, fill the gap between the wall of the pool and the pit with sand. In order not to disturb the geometry of the walls, we fill the bowl with water. The water level when backfilling should always be slightly higher than the sand level.

By pouring sand around the perimeter and tamping it with poles, you fill the entire gap between the wall of the pool and the pit. Then all that remains is to do it around the pool, similar to what is done around the house. This is necessary so that water does not flow down the wall and wash away the sand. After installing the blind area, finishing work remains.

The last stage - finishing work

This option of installing a polypropylene pool with your own hands is incomparably easier and faster, and requires much less money. But it is only suitable for small pools.

Maintenance and operation

We should not forget that often, buying a pool is much cheaper than the equipment for its maintenance. After all, a pool is not only a container of water, but also additional equipment.

In any pool, water must be supplied and discharged. It is also necessary - both mechanical and bacterial. Many more install a water heating system: there is not always enough sunlight for the water to warm up to comfortable temperatures. All this is a considerable expense both for the purchase of equipment and for maintaining the system (reagents, electricity, water).

Then you need to take care of how the pool will winter. If a polypropylene pool is installed according to the “economy” option without a base and backfilled with sand, then it must winter with water. Only in the fall are half-submerged plastic bottles thrown into the water (a little sand or earth is poured onto the bottom). When the water in the pool freezes, they compensate for most of the load. And the ice itself in the bowl compensates for the loads that affect the pool from the outside. The system has been tested by many summer residents; misfires occur very rarely.

The only problem may arise with the winterization of drainage pipes. If you don't drain the water from them, they will burst. Therefore, the water is drained, but only below the nozzles and the taps are left open. Pumps and other equipment are taken to a warm room.

Large pools, around which a reinforced concrete protective frame is made, spend the winter without water. Water supply and purification equipment should be located at above-zero temperatures in winter. It is dismantled in the fall and brought into a heated room, or the pit is made insulated.

We should also not forget that often buying a pool is much cheaper than maintaining it. After all, a pool is not only a container with water, but also additional equipment, including a water supply system (pump) and a cleaning system. If you're on a budget, it might be better to opt for .

Polypropylene pools are becoming more and more common today. This is due to their excellent quality characteristics. Feedback from consumers who have already been using such products for a long time will help you verify this.

Reviews about durability and the need for finishing

Polypropylene products today are used as swimming pools for many reasons, among them low vapor, heat and gas permeability. At the installation stage, you will not need to use insulation materials, since polypropylene has low thermal conductivity, which helps maintain a constant water temperature. This allows you to keep the water inside the pool warm for quite a long time. This quality is reflected in the consumption of coolant and electricity. Thus, the owners note that they do not have to heat concrete, earth and air, but only the water itself. Polypropylene pools are characterized by excellent impact and mechanical resistance to bending. Seasonal temperature changes are also not a problem for this material. This is why swimming pools are installed outdoors. You can also save money during the installation process, since the bowl does not require lining or finishing. You do not have to purchase tiles or film, since the internal base of the pools has a finished look.

Ease of care

The surface is easy to clean, has a pleasant shade, and is also resistant to dyes and chemicals. When wetted, the base does not become slippery, which indicates injury safety.

Reviews about resistance to temperatures and leakage

Polypropylene pools today are becoming more and more common in everyday life for the reason that they perfectly withstand the effects of alkalis and acids. Among other things, the surface can be exposed to ultraviolet radiation, which does not damage the material. Polypropylene is not capable of entering into chemical reactions. It does not fade or wear out, which allows the product to be used for 20 years. During this period, there will be no need to carry out repair work, you will only have to carry out disinfection and cleaning. Consumers emphasize that polypropylene is incredibly resistant to record high and low temperatures. This allows owners of outdoor and indoor pools not to drain water during the winter. This way, you can use the outdoor pool as a winter skating rink. Experts note that these products are incredibly airtight. Due to the manufacturing technology, the container has ideal waterproofing. The surface prevents the emergence and development of algae and fungus on the surface. indicate that such pools are ideal from a disinfection point of view. Polypropylene pools are available in a wide range of colors.

Reviews about cost and variety of forms

A polypropylene pool for a summer residence can have all sorts of shapes. This became possible to achieve thanks to a special design of this kind that allows even the most unusual imagination of a designer and architect to come true. Additionally, you can purchase the entire set of equipment, which may be the same as that provided for reinforced concrete products. Among them are hydromassage nozzles, skimmers, countercurrents, air massage nozzles and more. If we compare polypropylene pools, reviews of which you can read in the article, with traditional ones, then their cost and production time will be much more attractive. Thus, these products cost 2.5 times less than their concrete counterparts.

If you want to buy a pool, then, according to buyers, everything will depend on the size and depth. Owners of private houses who have already installed similar structures on their territory indicate that a bowl whose size is 4 x 8 meters with a depth of 1.5 meters will cost approximately 100,000 rubles.

Feedback on production times

Polypropylene pools, the price of which was indicated above, are manufactured on a turnkey basis within a period that varies from a week to two. Afterwards, according to consumer reviews, an environmentally friendly, durable and solid pool appears on the territory, which initially could have been sold in the form of rolls or individual sheets.

Negative reviews

Polypropylene pool bowls also have their disadvantages, which, if you consider them, you may refuse to purchase such a product. Among the disadvantages, buyers quite often point out that the bowls have very noticeable weld seams between sheets of material. This may clearly indicate that budget plastic was used in the process of arranging the pool. Some owners of private houses refuse to purchase a polypropylene pool in favor of one made from natural materials and concrete, due to the more aesthetic appearance of the latter option. Another disadvantage is that polypropylene is not vandal-resistant. This is reflected in the construction of the pool. If the length exceeds 8 meters, then the bowl will have to be additionally concreted. This may lead to additional material costs. Despite the fact that the lifespan of such structures is considered impressive for polypropylene, a number of consumers abandon plastic structures in favor of other solutions. This is due to the fact that concrete structures can last a much longer time.

Professional installation required

You can purchase polypropylene sheets for swimming pools yourself. However, experts recommend entrusting installation to a team of professionals. This is the only way in many cases it is possible to achieve a positive result that pleases its owners for a long time. Moreover, experts in their field advise entrusting this work to companies whose workers have many years of experience in the installation of polypropylene bowls. As practice shows, if the installation of a polypropylene pool was carried out incorrectly, this can cause deformation or even rupture of the material during operation. Therefore, before ordering installation manipulations from a certain company, it is recommended to ask what experience it has and what place it occupies in the market for providing relevant services.

Option for manufacturing a stationary polypropylene pool

Polypropylene pools, the price of which may seem impressive to you, can be made independently. In this case, you will have to be guided by a certain technology. At the first stage, it involves preparing a pit, which will determine the size of the future structure. Next, the bottom and walls should be leveled, and a screed should be poured onto the surface. During the manufacturing process, polypropylene sheets should be used. At the next stage, a pool bowl is made on a reinforced concrete slab, which will have stiffeners. In this case, you will have to use hand-held hair dryers and a welding extruder. That is why there is no way to do without special equipment. Embedded elements should be inserted into the resulting bath and the pipes should be taken out towards the technical room. At the next stage, the bowl is tied with reinforcement, thermally insulated and expanded. Now you can start making the external formwork. The internal formwork will be a polypropylene bath. Then you can carry out layer-by-layer concreting of the walls with the addition of water to the pool.

The polypropylene pool was built with our own hands in 2009. Over 4 years of operation, no deviations were found.

I will try to describe the entire process of making a polypropylene bowl, its installation, pouring concrete, etc.

Anyone can build a swimming pool with their own hands.

I thought for a long time about the question of what material to build a pool from.

I wanted to do it once and not return to this issue again, not paint it every year, not look for leaks, not worry about the cladding in frosty weather. Well, having studied the pros and cons of different technologies, I chose a polypropylene pool.

Having sketched out a site plan on a piece of paper, the location of future buildings, a bathhouse, a dog enclosure and paths, I drove in pegs and pulled a rope around the perimeter of the future pit. Its dimensions were made 1 meter wider than the dimensions of the planned pool bowl on each side, so that you could move freely around the pool, install pipes, weld seams with an extruder, weld stiffeners, etc.

I also recorded the elevation mark where the edge of the pool should be located. And from this mark they dug 50 cm deeper than the pool bowl. 30 cm of which is a cushion of crushed stone laid on geotextile so that the crushed stone does not go into the ground. And 20 cm is reinforced concrete.

Since the area was already fenced around the perimeter, entry of large equipment such as an excavator was not possible. They invited diggers and got to work. The cost of digging 1 cubic meter. for excavators is approximately equal to the cost of an excavator. But the speed, of course, is not at all the same. They dug for probably two weeks. On the site, the soil is almost pure sand, which was constantly crumbling and as a result, according to calculations, about 100 cubic meters of earth were dug up. All the earth was dispersed throughout the site for its further leveling and backfilling.

After the pit for the pool was dug, the area began to look like it had been bombed.

As planned, the bottom of the pool will go into a depression so that when diving from the side it will not crash into the bottom.

As I now understand, all the “hemorrhoids” associated with the implementation of this idea are not worth it at all. You can dive perfectly at a standard depth of 1.5 meters.

But I realized this only after a couple of years of using this pool. In general, if I build myself a pool again, I will never bother with variable depth. 1.5 meters is the golden mean!

But if I did, I’ll tell you so...

The article is posted in the category , with tags , . .