DIY corrugated flowers. Corrugated paper for flowers. Original compositions and examples of decor creation

Materials:

  • corrugated paper of the desired color;

  • glue (PVA or glue stick).

Manufacturing

1. First you need to prepare the flower details from corrugated paper. To do this, draw a circle of the desired size on cardboard (this will be the base of the flower) and cut it out with scissors. Then take the corrugated paper and place it in front of you so that the stripes are vertical. Cut out the petals of the future flower.



You will need 12 large petals, 6 medium and 10 small. Process the edges and shape of the petals as shown in the photo. To decorate the center of the flower, cut out a slightly rounded strip of corrugated paper and often cut with scissors not all the way through, and also roll a small ball from a small piece of paper.


2. Now you can get to work. Stretch the petals a little (carefully so as not to tear). Apply a layer of glue to the edges of the cardboard circle. Distribute 5 large petals evenly around the circumference and glue. Then glue the petals in the same way in the next 2 rows (4 and 3 petals, respectively).




3. Glue the medium and small petals in the same way. Please note that the closer to the center the petals are located and the smaller their size, the fluffier their edges.




4. Decorate the center of the flower from corrugated paper. To do this, fold the cut strip of paper in half and drop glue onto one end. Then place a ball of paper there and start wrapping the strip around it. Secure the end with glue, and then glue the entire bud to the center of the flower.


Using a similar technique, you can make other flowers from corrugated paper, differing in the shape of the petals and size - for example, dahlias or roses. This flower can be glued to a gift box using double-sided tape.





Delicate bouquet: flowers made of corrugated paper

Prepare the following materials:

    wooden skewers;

    corrugated paper of 3 colors (yellow for stamens, green for leaves and a suitable color for petals);

    glue stick;

Manufacturing



1. Take yellow paper and cut out a rectangle with sides of approximately 8 and 15 cm. Then cut the rectangle along the long side about 2/3 in several places. In total you should have 8-9 strips. Now twist the uncut part and gently roll the strips with your fingers to form thin stamens.

2. Attach the resulting bunch of stamens to the petal paper and determine the approximate size of the petals based on the length of the stamens. Cut out rounded oblong petals (5-6 pieces).

3. Stretch the petals a little so that they take on a more natural shape. Then use a glue stick to glue them to the base of the stamens, wrapping them around one after another.

4. Now you need to make a flower stem from corrugated paper. To do this, take a wooden skewer and insert it into the base of the bud. Wrap the bottom edges of the flower tightly around the skewer. Cut a thin ribbon strip from green paper and tightly wrap a skewer greased with glue from the base to the very end.

5. Cut out leaves from the same green paper and glue them to the stem in random order.

Make several of these flowers from crepe paper. You can use different colors and shapes of petals. Collect the resulting flowers into a bouquet and place in a vase.

Sweet bouquets

A sweet bouquet is a wonderful gift for any celebration, be it a wedding, Valentine's Day, March 8 or a birthday. And here corrugated paper will come to your aid.


Materials:

    round candies (for example, Ferrero Rocher);

    transparent film (or gold foil);

    corrugated paper (red, pink, yellow and beige);

  • gold threads.



Manufacturing

1. We will make 2 flowers at once. To make them, cut out 2 rectangles from yellow and beige corrugated paper with a long side slightly larger than the circumference of the candy.


2. Fold the rectangles like an accordion 5 times and iron the folds with scissors.


3. Trim the top of the accordions until they are round.


4. Straighten the rectangles and stretch the petals a little so that they look natural.




5. Cut the petals 2/3 of the way.


6. Using a toothpick, “perm” one set of petals of each color.



7. Cut out a square from transparent film or gold foil, wrap the candy in it and secure with gold threads.


8. Wrap flower petals from crepe paper around the candies. Those petals that are curled more tightly should be in the center, those that you stretched just a little should be at the edges.


9. Slightly straighten the outer row of petals.


Use 3 or more rows of petals - such flowers will look more lush.




Having made many of these sweet flowers from corrugated paper, make a large one out of them, additionally decorating it with organza, beads, ribbons and other decorative elements.

Using the same technique, you can make bouquets of flowers of slightly different shapes. Detailed photo instructions are presented below.

Content

Just celebrated a friend’s birthday, or is it already a colleague’s anniversary at work? We celebrated an anniversary, do you need to go congratulate your boss? The boss was congratulated, no ideas on how to surprise a picky aunt/grandmother/mother-in-law/mother’s friend/neighbor? Come on, come up with a gift for someone who has everything. This person just needs to be surprised with your skill and a gift made with your own hands from the heart! And large paper flowers are suitable for this. By the way, if you still have a gift, then the box in which it probably lies can be decorated with paper flowers instead of the usual packaging.

Corrugated flowers

Large, voluminous floral installations with your own hands can be made very quickly and at minimal cost. Corrugated paper is not very expensive, it is sold in rolls and is enough for many products. So, prepare:

  • paper;
  • glue gun;
  • scissors;
  • skein of thread;
  • wire.

To make large flowers we will need a petal template. It can be cut out of cardboard and attached to corrugated paper.

Now you need to think about the core: it can consist of many small petals or you will need to prepare the stamens. In addition, before assembling, think about whether the flower is intended to be mounted on a wall or whether it will be on a stem. If the latter, then wrap the wire with green paper and start assembling the flower from the middle, i.e. from the smallest petals, using a glue gun.

The centerpiece can also always be a delicious chocolate candy. It is attached to the wire and only then decorated with petals. It turns out to be a very original and useful bouquet.

Using a similar method, using a stencil, you can create large interior roses that are placed in glass vases. There may be several such vases around the apartment.

Giant peonies

How to make large peony flowers from corrugated paper? In the interior they look simply gorgeous. By the way, you can even make a very interesting headdress, so, take the following:

  • several rolls of corrugated or crepe paper in suitable colors;
  • glue;
  • thread and needle;
  • a balloon the size of your head;
  • newspaper for papier-mâché.

First you need to make a base from newspaper and a ball using the papier-mâché technique. You need to glue squares or strips of newspaper onto the ball. There should be many layers so that the base is dense. You need to leave the base for 24 hours until it dries, then carefully deflate the balloon and cut the base.

Now you need to put one half into the other and sew them along the edge. It is also advisable to glue the edge of the halves.

Now let's start making the petals. They should be of different shapes; prepare a stencil to make it convenient to cut them out.

There should be really a lot of petals and they should be diverse.

Each petal must be cut out in quantities of at least 10 pieces. Now each petal needs to be stretched well, and the base should be slightly bent to the side so that you can later glue it to the base. The petals should be voluminous; this is the main point in the question of how to make high-quality large flowers from corrugated paper.

The thinnest petals go to the center, place slightly larger petals around the core, there may be a small distance between the rows. The edge of the workpiece also needs to be covered with paper of the same color.

Continue filling the space with petals. Take your time, before gluing it, attach the petal and see how it looks.

Now you will need to prepare several very large petals, which will be used for the external design of the workpiece.

As a result, you should end up with such a chic peony that can be used as a headdress for the holiday.

You can give this flower as a gift to your child for his birthday. The birthday girl had definitely never had such a charming gift before.

In addition, such flowers can be used to decorate a wedding venue.

The master class on large paper flowers continues, next up is a giant dahlia.

Such a flower can be made using a ready-made pattern, or from many petal parts. That's what we'll do. Making these paper flowers with your own hands is very easy. What do we need?

  • thick double-sided colored paper;
  • PVA glue;
  • scissors.

Cut out a circle for the base from the same paper. Then you need to cut a lot of squares for future petals; the larger the square, the larger the flower. Then each clapstick needs to be folded into a paper envelope, rolled into a horn shape.

After this, all the horns need to be glued to our base, observing the order, so that you get such a beautiful flower made by your own hands.

Full size flowers

Large flowers made of corrugated paper can be made even easier, with virtually no stencil and many details. Using this method you can make full-size flowers. These decorations are perfect for decorating a festive interior and will become the subject of photographers' attention.

To do this, you need to cut out many circles from corrugated paper; they should be of different sizes: from huge to small. The edge of the workpiece can be lightly processed with scissors - cut with a wavy line. After that, all the blanks need to be folded one into one, fastening the layers with glue.

In general, on our website you will find a lot of interesting master classes on large paper flowers, including life-size flowers.

There may be several of these paper flowers around the room, but don’t overdo it. Let there be fresh flowers on the table. A huge rose can become the queen of the holiday.

Corrugated paper is obtained by corrugating (from the word gaufrer in French - pressing a pattern, folds, imprinting an image), that is, creating artificial folds or so-called corrugations by folding the sheet multiple times. Such wrapping paper appeared quite recently. It was first mentioned in 1856 in London. It was there that it was used as a lining material in the development of various hats.

Today, the industry produces a very wide range of corrugated paper of completely different colors, types, grades, for the most unexpected and banal purposes.

Of course, it is primarily used to wrap gifts and wrap holiday bouquets. But there are other purposes for using it, for example, creating .

Corrugated packaging is an ideal option for a gift of any nature and type. This is an excellent material for decoration, quite elastic and quite quickly takes the shape you have in mind.

This makes it versatile and popular among clients of gift wrapping and decorating shops and flower shops.

This paper combines very easily with other packaging materials. Its texture and structure make it possible to produce three-dimensional compositions and crafts for children.

The range of colors surprises even adults, what can we say about children, who will only enjoy tinkering with bright and colorful paper and making something interesting and useful from it, for example, a birthday card for their grandmother, a congratulation to a classmate at school, etc.

Main types of paper:

  1. Corrugated. The corrugation in this product is larger in size and is often used to efficiently pack large gifts, with increased density and reliability;
  2. Creped. It has a fine corrugated pattern and is widely used for fine needlework; its structure is quite pleasant. Has a wide range of colors;

According to the size of the height of the corrugated flute, there are:

  1. Flute type E (about one and a half millimeters);
  2. Flute type B (3.2 millimeters);
  3. Type A (almost 5 millimeters);
  4. Production of flute heights in paper to order.

Depending on the type of packaging, corrugated paper can be:

  1. On a roll. A very economical option, especially relevant for stores involved in professional packaging, it is easier to transport and takes up very little space in the room;
  2. Sheet type of packaging. This one is easier to store because it usually comes in special packaging. It can be placed on the table and taken out as needed.

Advantages of corrugated paper over other packaging materials

Each packaging and material has its pros and cons. The advantages of corrugation should be discussed separately:

  • This corrugated paper has flexible properties, holds its shape well, and is rigid.
  • Used to create various decorations, window displays, exhibition stands, and simply for visual arts in kindergarten or school.
  • A very popular wrapping paper not only for various floral arrangements, but also for packaging large items.
  • Has a very wide range of colors. Having a variety of shades will help you choose exactly the paper you need. From it you can make beautiful paper flowers, even entire compositions that will be on par with real living flowers - this way they will be realistic.
  • Corrugated cardboard is also made on the basis of corrugation. It is suitable as a protective layer for packaging a fragile gift, for example, a crystal set, glassware, small household appliances, which should never be dropped. Corrugated cardboard will provide the product packaged in it with a “cushion” effect and protect it from impacts and, especially, damage.

There is also another name for corrugated paper - fluting and a second name often found in product descriptions - liner. Such paper is considered not of very high quality, since it is rough and not flexible, like ordinary corrugated paper.

This corrugated paper has a predominantly fibrous filling and often matches the composition of the raw materials used to produce the testliner. The raw material needed to make cardboard is subject to sufficient stress, so it must be tough and practical.

The paper described above also comes in different shapes. It is produced for certain purposes and with certain requirements and has different weight and format characteristics.

Such products are rarely affixed with seals and other identification marks; usually, if this is required, then only for a specific order.

  • Corrugated paper can be made from 100% recycled content and recycled waste paper.
  • Equally suitable for external packaging and can be used as internal packaging or padding.
  • The cost is not too high, which allows you to save on packaging material.
  • Its structure is dense and practical, so during its transportation, its condition does not change, it does not deteriorate. It is very convenient to store; it does not require any specific storage conditions.
  • Light enough. Thanks to this property, it is easy for even the smallest “creators” to work with it.
  • Absolutely environmentally friendly, which means safe for life and health.

One important parameter worth noting is safety and environmental friendliness. Especially when you compare it with other materials, the same bubble wrap that is usually used to wrap household appliances during transportation, glass objects and other fragile interior parts.

Bubble film is far from the most environmentally friendly material, as it is made using plastic.

And, as we know, plastic does not decompose in a year or two, but sometimes even for years. The corrugation will also be harmless for animals.

Corrugated paper is often made from old, unwanted waste paper and other similar waste. This allows you to perform 2 important and necessary functions at once:

  1. Save money on purchasing packaging material or protective equipment in order to transport fragile items.
  2. Get rid of excess, long-accumulated paper waste.

Corrugation has a very wide range of applications. Including handicrafts. Due to the fact that this material has amazing parameters and properties - flexibility, many colors, different structures and a certain rigidity.

Elements made from this crumpled paper are easy to change shape.

That is why corrugation is a wonderful and at the same time cheap material for creating bright and unique images for carnivals and other holidays where costumes and bright colors are needed.

You can use it to make a lot of home decorations for New Year's holidays, Easter days, Birthdays and some other holidays that are special to you.

Corrugated paper makes beautiful artificial flowers that can decorate the interior of any room.

From this material you can make flowers that are unique and life-like in appearance.

The petals of such flowers, if the paper is not bright enough, can be painted by hand using watercolors, and then the product can be bent so that the final image of the flower becomes as if alive. The only thing that will be missing is the natural aroma.

Today, corrugated products are gaining popularity again. This is explained by the fact that any craft from this artistic raw material can be made quite simply.

That is why the material will be relevant in preschool and school institutions in the lessons of fine arts, labor, and children's creativity.

Corrugated paper for candy bouquets

First of all, the paper must be selected according to its density. It is unlikely that you will be able to form high-quality flowers and bouquets of sweets from thin paper. For example, paper from Chinese and Polish manufacturers has a number of disadvantages:

  • does not stretch and almost does not take the shape of petals
  • When stretched it breaks very quickly
  • doesn't keep its shape

If you decide to get serious about manufacturing, then, first of all, you need to decide on paper.

On the Russian market, and not only, corrugated paper from the Italian manufacturer Cartotecnica Rossi is extremely popular.

It comes in 57 shades, including double-sided, metallic and transition metal.

How to pack fresh flowers and a bouquet in corrugated paper master class video

How to pack a gift in corrugated paper master class video

For craftswomen who love all sorts of new creative ideas, as well as hand-made beginners, we recommend making flowers from corrugated paper with your own hands - this is an incredible experience you can use in any festive or everyday situation.

Big flowers can be placed in a large vase, and they will significantly decorate and “revive” the interior. A surprise bouquet of paper flowers with candies can be presented for the birthday of a loved one or given to a child with a sweet tooth.

You can use paper flowers decorate a living room or restaurant hall, they can be used as boutonnieres or made into bouquets and artistic compositions.

Flowers made of corrugated paper will not wither like living plants and will not fade in the sun like plastic ones. Such light and natural material as paper is easy to process, does not cause allergies and does not harm the environment. It is a pleasure to work with him for both adults and children.

All you need is several rolls of multi-colored corrugated paper, scissors, glue, good mood and a step-by-step master class. We are armed with detailed instructions and are ready to teach you how to make incredible bouquets step by step.

Paper flowers are the perfect decor for almost any holiday or event. If you learn how to make flowers yourself, it will be quite budget option for decorating the hall or making individual souvenirs for guests and visitors of the event.

Detailed photo instructions and our tips will help you make almost any paper flowers with your own hands. Corrugated paper you can make the following flowering plants, which cannot be distinguished from living ones:

  • tulips;
  • peonies;
  • roses;
  • chrysanthemums;
  • chamomile;
  • orchids;
  • and in general - any flowers.

First flower - corrugated paper chrysanthemum, which will be easy to do even for beginners. Gather several sheets of paper into an accordion and then fasten them with thread.

What's great about the following designs is that you don't have to cut out each petal individually; you just need to roll up a piece of corrugated paper and properly process the edge, according to the type of flower.

Try to do it yourself spring dandelion, delicate carnation, lush peony or a touching chamomile.

For greater clarity, you can use templates for making flowers from paper.




Finished petals will also help you make the perfect paper flowers.

Beginning hand makers get a lot of help when creating incredible floral masterpieces. video lessons with detailed comments from masters.

How to make flowers from corrugated paper for interior decoration?

Volumetric paper flowers often used when creating festive interior design.

They are hung from the ceiling, tied to the backs of chairs and tables, decorated with walls and placed in huge vases.

Full size flowers will serve as an unforgettable attribute of the original photo shoot. And these giant flowers are quite easy to make.

Huge white roses They will become a wedding decoration and a chic detail for a festive photo zone. They can be made according to a template.


Delicate and colorful spring flowers can be attached to the wall,arch or special screen.

How to make paper flowers: making bouquets

Today it is hardly possible to surprise with an ordinary bouquet, but bouquet with sweets hidden inside– this is a real surprise for those with a sweet tooth. If you know how to make flowers from corrugated paper, consider that you have already come up with an original and beautiful idea for your loved ones.

Making a flower will not take you much time. And with the help of photographs and detailed explanations you will succeed wonderful English rose with candy inside.
We suggest you study MK.










Crafts made from paper flowers often decorated with beads, leaves, decorative details. Use a vase or small basket as a base.

What other flowers can be made for a bouquet? Yes, any - it can be small pansies, exquisite orchids or delicate peonies.

I would like to dwell on the production of peonies in more detail.

To work you will need:

  • white corrugated paper;
  • food coloring or watercolor;
  • water in a spray bottle;
  • round microwave bowl;
  • scissors;
  • glue gun (hot);
  • tape;
  • floral wire for a stem or an old element from an artificial flower.

  1. Take paper and cut out a petal.
  2. Rotate the microwave bowl and attach the petal to it.
  3. Spray water from a spray bottle.
  4. Painting the petal paints of different shades.
  5. Place the bowl and petal in the microwave for 30 seconds or until completely dry.
  6. Carefully remove the petal from the bowl. It will be concave in shape.
  7. We prepare the wire or old stem for gluing the petals.
  8. Attaching the middle and glue the petals around it.
  9. We decorate the stem with tape.

The rose is a noble flower and at first glance it may seem that it is very difficult to create this miracle on your own. We'll show you simple master classes on making roses from corrugated paper with your own hands step by step, and you will be convinced that this mission is not only doable, but also very enjoyable.

Such a rose you can make it with your child.

More large and lush roses you can do with this simple master class:

  1. You need to cut a fairly long strip from corrugated paper (the larger the strip, the larger the bud will be).
  2. Wrap paper around wire- this will be the base of the bud. When winding a bud, each layer must be wrapped with glue.
  3. We cut out the petals of our future rose from paper - different in size and shape, so that the rose seems natural.
  4. Glue the petals to the base, apply glue to the underside of the petal.
  5. We use green paper to make sepals, which we will glue to the base of the bud.

Another master class will tell you how to beautifully pack a bouquet for a gift.

Video: how to make flowers from corrugated paper

The easiest way to feel the approach of any holiday is to start making home decor for the celebration. This time I decided to figure out how to make flowers from corrugated paper - realistic and stylized. Let's figure out together how to make flowers from corrugated paper and what you need for this.

There are many handicraft techniques in the world that allow you to make beautiful flowers with your own hands - today flowers are made from beads and fabric, ordinary paper (quilling, origami, appliqué, etc.), they are knitted and felted, but still one of the most popular methods of making remains assembly of corrugated flowers. What are these flowers good for:

  • they can be either photorealistic or fantasy;
  • they are easy to make in a few minutes (unlike felting or beading);
  • easy to recycle (relevant for those who want to decorate a large hall with flowers for the holiday);
  • very affordable materials - corrugated paper costs a penny, especially if you buy in rolls rather than sheets;
  • no special training required;
  • there is no need to use any complex tool;
  • it’s easy to get an acceptable result without experience (for example, flowers can be made from paper with candies - even small bouquets look very presentable);
  • the products are bright and expressive (which is very important for children).

Getting ready for work

What you will need to make flowers from corrugated paper with your own hands:

  • several rolls of paper (it is better to choose matching colors and green for leaves and stems);
  • wire, floral sleeve or any other devices for stems;
  • cardboard for blanks;
  • glue;
  • sharp scissors;
  • breadboard knife;
  • threads and fishing line.

It is most comfortable to work at a table in good lighting. If you plan to make large flowers (more than 15 centimeters in diameter), then you can sit on the floor (of course, after sending your children, husbands, cats and your beloved dog for a walk).

Making flowers

The simplest option:

So, making flowers from corrugated paper in more complex versions almost always follows the same scenario. I will describe it so as not to rewrite one by one:

  • first you need to make a petal template;
  • cut 15-20 petals for each flower (if you want to make a realistic flower, then make petals of different sizes - for example, five small, five medium, five large);
  • cut the petals (when cutting, observe the direction of the corrugation);
  • collect the central part of the bud (twist 5-7 petals together, tying them at the bottom and gluing them together);
  • Next, the petals need to be slightly stretched and bent so that they take the most natural shape for the plant;
  • Glue the prepared petals to the bud;
  • fix the flower head on the prepared stem.

How to make a stem:

  • take a piece of wire, a floral sleeve, an ordinary twig - at your discretion, measure the required length;
  • cut;
  • decorate with green corrugation, or fabric, or paper;
  • we imitate leaves, shoots and thorns;
  • cut on both sides again.

Making realistic roses

After we have made the blank, we need to stretch the petals - this will give the desired volume and we can imitate the natural bend of a rose petal:

Let's start assembling. We will need wire and thread. First, bend the wire as shown in the photo and wind our blank around the wire, forming a bud:

The outer petals need to not only be stretched, but also the corrugation should be slightly smoothed - this will give the effect of a wavy edge, and the flower will look lush.

Make a sepal from green paper according to the photo instructions:

Build some leaves for the stem and secure them.

Spray the finished flower with hairspray - this will give it a little shine.

And this is the easiest way to create a rose:

A similar option for twisting a rose flower, but with explanations from the author:

Realistic peonies

A peony is a large flower in itself, so it is better not to try to make small flowers, but to collect several really large and beautiful peonies. To make a large flower from corrugated paper, you will need about twenty minutes.

By the way, if you want to achieve a more natural color, you can take white paper and tint it with food coloring - delicate pink and orange flowers will really look like real ones.

The paper needs to be cut into rectangles, each rectangle should be rounded.

  • Peony is a rather disheveled flower, so the petals can be cut here and there and even carefully torn.
  • You will need a lot of petals - more than 25.
  • For sepals, use green paper; cut out 8-10 green leaves from it.
  • To get voluminous flowers, you can put candy in the center or form a ball of foil.
  • Trim a few petals at random - the less neat you are, the more natural your flowers will be.

Or a more complicated option:

Decorative and stylized flowers

How to make simple flowers from corrugated paper? Step-by-step instructions for making different colors and different methods.

Realistic lilies. Photos of creation step by step:

We make large flowers from corrugated paper - roses.

Such elegant and simple flowers made of corrugated paper can be useful for photo shoots or interior decoration, and they can also be used to create various decorative compositions on the street (just keep in mind that the flowers are quite light and can be carried away by a gust of wind). In general, full-size flowers are often used for decoration, but making them according to the same principle as small flowers is not too labor-intensive.

Huge poppies:

Photos step by step: stylized poppies, but in miniature.

In order to make lush artificial poppies, you will need paper of three colors (black, red, green), wire, thread, glue or stapler, and of course, scissors.

  1. From a roll of black paper you need to cut a cylinder about ten centimeters long.
  2. Tie tightly with thread and cut into a fringe along one edge - this will be the center of our flower.
  3. You can also make a box in the middle - to do this you need to take scraps and wrap them in black paper to make a ball. The ball is fixed with a thread or a stapler and attached to the center of the fringe.
  4. The roll of red paper must be unrolled and cut into six parts, each part folded like an accordion.
  5. Place all the accordions one on top of the other and secure them well with thread.
  6. The corners of the accordions need to be rounded with scissors.
  7. All petals need to be well unfolded (we straighten each accordion and it turns out to be a petal).
  8. Use thick wire or wooden slats as stems - they need to be wrapped in green corrugation, cut out large leaves and attached to the stems.
  9. Secure the poppy heads to the stems and straighten the petals.

Or a slightly different option on how to make a poppy flower step by step From and To:

Now you know how to make more flowers from crepe paper. If you want to make giant flowers, then for beginners it will not be very difficult, however, it is worth considering some points:

  • use high-quality paper - of course, even from waste paper a master can make something beautiful, but for beginners it is better to rely on good materials;
  • huge flowers must have weights, otherwise they will simply fall (or fix them with fishing line to the wall);
  • do not smooth the petals completely, leave a slight corrugation;
  • It’s better to have a lot of petals than a few (large roses with four petals look very pathetic);
  • for a field composition, use several shades of green paper - then ordinary herbs and plants will look natural;
  • if a child is making three-dimensional flowers with you, take care that he does not cut himself with paper, scissors, fishing line or threads;
  • For decoration, use flowers made in two or three shades - more colors may look awkward.

More ideas and inspiration

Have you already wanted to make beautiful flowers from corrugated paper with your own hands? Great, that means you liked the ideas I proposed and mk. I’ll tell you a little more about what you can create with your own hands from corrugated paper.

Cute daisies:

See how they make crafts from corrugated paper - gorgeous roses that look better than real ones!

And in this master class you can learn how to make sweet flowers made of corrugated paper with your own hands. And so, flowers made of corrugated paper with sweets, decorated in the shape of a heart:

By the way, sweet bouquets with flowers made of corrugated paper are a wonderful find for any holiday. Such bouquets usually attract more attention than a traditional basket of flowers and are remembered for a long time.

And this is how you can make a Christmas flower - Poinsettia from corrugated paper:

Make paper flowers with your own hands from corrugated colored paper, or make a bouquet of flowers for holiday decoration, or maybe you want to make flower garlands from paper to decorate the hall? There is nothing simpler - learn how to make roses from corrugated paper step by step, and you can give a master class on any type of flower.

Try making corrugated flowers at least once, and then it won’t be difficult for you to make a new product - watch different step-by-step videos and make gorgeous bouquets with your own hands!

Loading...Loading...