Types of ceilings in the bathroom. Ceiling for the bathroom - which is better? Plastic panels for the ceiling in the bathroom

Many people are afraid to take on the task of repairing the ceiling in the bathroom because of the wide selection of building materials, about the properties of which they know almost nothing. Most often in a store you have to trust sales assistants, but they are only concerned with selling the most profitable product for them. Some people, when choosing ceiling options, rely on the experience of friends and acquaintances, but there is a risk that the material will not be suitable for a particular room. Therefore, it is worth spending your time studying the properties of a possible ceiling finish for the bathroom.

Ceiling suitable for bathroom

A good bathroom ceiling must meet the following requirements:

Do not be afraid of a high percentage of humidity. Bathing, washing, cleaning - all this contributes to the appearance of dampness in the room, and even the most technologically advanced ventilation will not be able to completely save the room from water vapor. Therefore, before finishing your ceiling, you need to make sure that the material is sufficiently resistant to moisture and will not become moldy.

The ceiling in the bathroom should be easily cleaned of possible contamination. It’s rare that anyone manages to carry out a full cleaning of this room: the space is limited not only by square footage, but also by various shelves where household chemicals and hygiene products are stored, a washing machine (for most residents) and, of course, the bathroom itself. Climbing onto equipment or enamel sides is unwise and dangerous, so it is better to take care in advance to ensure that the finish does not require complex maintenance.

It should be aesthetically combined with the appearance of the room. You need to make a ceiling in the bathroom based on the existing original interior. If you ignore this requirement, the contrast will be striking.

The material must be environmentally friendly and not emit harmful fumes into the air. The repaired ceiling should not have any extraneous unpleasant odors, including when the temperature and percentage of humidity in the air increases.

The small dimensions of the room complicate the work, so repairing the ceiling in the bathroom with your own hands must be done using finishes that are easy to install. It is also worth considering the future need to mount light sources on top, and the material should not become an obstacle to this.

Adequate cost. Rarely does anyone have a surplus of finances, so you need to navigate the prices and not overpay for nothing.

It would seem that everything is obvious, but it wouldn’t hurt to remind you of the minimum requirements.

What is not advisable to decorate the ceiling in the bathroom?

There are materials that are not suitable for bathrooms for one reason or another. They are short-lived and will only ruin existing repairs. Here is a list of materials unsuitable for finishing:

Lime whitewash is an outdated bathroom ceiling design. In comparison with modern options, it looks faded and dull. In addition, it is better to use whitewash in rooms with moderate humidity, since it does not tolerate dampness well. Also, in order for the lime to retain its attractive appearance, new layers need to be applied periodically, and this is very tedious.
Chalk whitewash is not suitable for bathroom ceilings for the same reasons as limewash. In addition, it is an excellent environment for fungus to spread on its surface.
Bathroom ceilings do not accept enamel or oil paints. Exposure to water can negatively affect even the highest quality compounds; they can crack, fade and crumble.
Paper wallpaper is not the best option to repair the top of the room, since it will swell due to high humidity, or even come off completely. It is better to pay attention to other types of wallpaper.
Before finishing the ceiling with plasterboard in the bathroom, it is recommended to make sure that it is resistant to water. Not every material in this category is suitable for damp rooms. When exposed to moisture, the classic version of drywall can become deformed and lose its quality and aesthetic properties.
What you don’t need to make your bathroom ceiling out of with your own hands is chipboard and fiberboard. This material is sensitive to dampness, and repellent stains and smudges may form on its surface.

Unfortunately, many options for finishing bathroom ceilings are no longer available, but don’t despair: there are plenty of other options to make the top of the room attractive and modern.

What to make an inexpensive bathroom ceiling from

How to decorate the ceiling in the bathroom so that it is beautiful, high quality, and relatively cheap? Prices are high for most building materials, and inexpensive analogues raise concerns: what if they are short-lived? But budget renovation options do exist! Below are available solutions for each.

Coating the ceiling with high quality acrylic paint

The color range of waterproof paints is very extensive, so choosing a shade that suits the existing appearance of the room will not be difficult. However, you can only paint the top of the room if the ceiling does not have any pronounced irregularities or defects. Otherwise, you need to level the surface using a primer and putty and, therefore, spend money on additional materials. But, fortunately, their price is also low.

A DIY bathroom ceiling has a number of advantages:

It is easy to care for - dust and dirt can be easily removed from the surface;
it can last quite a long time - up to 10 years in the absence of force majeure (for example, flooding from above);
the ability to create a unique design by combining different color schemes - you can draw anything;
Over time, the ceiling can become dull and darken from exposure to dampness, but this problem can be eliminated if you re-paint the top of the room, and you can apply acrylic to the existing layer without scraping it off;
Most modern formulations contain special substances that prevent the spread of mold.

One of the few disadvantages of coating with paint is the fact that you cannot hide utility lines under it. However, this will not have such a strong impact on the interior.

In addition to acrylic, bathroom ceilings can be finished with latex or water-dispersion paint.

Covering the top of a room with vinyl wallpaper

Another optimal and budget option is to decorate the ceiling with vinyl wallpaper. A special synthetic film protects this material from moisture and gives it additional strength. The advantages of vinyl wallpaper include the following:

the texture of the material can replicate wood, stone, bamboo stems, brick, velvet and much more, which guarantees its ability to “get along” in any interior;
low level of wear - like paint, vinyl wallpaper can serve its owner for ten years;
affordable cleaning - a do-it-yourself bathroom ceiling made from this coating can be washed with a sponge or even a brush without fear of damage.

However, as in the case of paint, to decorate a room with vinyl wallpaper, the surface on which they will be glued should not have any deformation. If they are present, then it is necessary to level the ceiling.

In addition, pasting with vinyl wallpaper should be done as accurately and accurately as possible, the seams should fit tightly to each other to eliminate the possibility of gaps. Free space between the sheets threatens the accumulation of water droplets on the surface, and hence the growth of mold.

Ceiling decoration with polystyrene foam tiles

The question of what material to choose for the ceiling in the bathroom, if there is no desire to further level the surface, is answered by polystyrene foam tiles. Yes, they will not be distinguished by any design originality, but they will hide all existing defects. Main positive characteristics:

before gluing with tiles, the surface does not need any preliminary preparation, except for treatment with an antifungal solution;
ideal for new buildings - the flexibility of the material allows it to survive the period of shrinkage without deformation;
Most products made from polystyrene foam copy elegant gypsum stucco, and if the bathroom renovation is done in a classic style, then the tiles will look very harmonious.

Finishing the ceiling in the bathroom with this material is quite simple. The tiles are attached to the ceiling of the room using universal glue or liquid nails.

PVC panels - a modern option

PVC panels are perfect for those who have wondered how to make a bathroom ceiling on their own. A relatively cheap material that is available in various colors, which makes it universal in application to various interior options. The panels are mounted on a frame made of wood or metal. Which one is better to choose? Considering the high humidity in the room, metal will definitely hold the lead. But wood is also suitable if it is pre-treated with an impregnation that protects it from moisture.

The undeniable advantages of PVC panels are:

easy installation - even a beginner can install it;
no need to level the ceiling - the panels will cover everything;
the surface can be easily removed from dirt with a regular damp cloth without the use of chemicals;
durability and long service life;
the ceiling will “fall” just a few centimeters;
lamps installed in panels look very stylish and modern.

It is better to make the ceiling in the bathroom from glossy PVC panels, then the room will visually expand and become more spacious.

Which ceilings are best for a bathroom?

Above we discussed budget types of ceilings that many can afford. However, if funds were initially set aside for repairs, then you can afford more expensive work. What ceiling is better to make in the bathroom in this case?

Slatted ceiling - a symbiosis of beauty and practicality

Glossy metal plates are not suitable for every interior: they are preferably used in medium-sized and larger rooms. But, if the dimensions of the room allow it, then a slatted ceiling is one of the most successful solutions. It is better to choose aluminum from metal, since its waterproof and anti-corrosion qualities are excellent. The seams of the slatted ceilings provide a stylish contrast, so it goes well with a two-tone bathroom interior.

The advantages of this finish:

a wide choice of colors - you can cover the ceiling in the bathroom with anything (from plain, gold-plated to patterned and chrome-plated options, as well as their combinations);
easy to assemble - the slats are adjusted to each other, like a construction set;
flexibility of the material - it is possible to make a curved surface that will look very impressive;
The glossy finish creates the illusion of spaciousness and makes the room more comfortable.

The only minor inconvenience will be the fact that it is necessary to regularly wipe the seams so that they do not darken and mold forms on them.

Suspended ceilings - the embodiment of any form in practice

What kind of ceiling should I make in the bathroom if the height of the room is quite large? A hanging option made of plasterboard, metal or mineral boards is suitable - your imagination is unlimited! As they say, if only there were funds! Positive characteristics of such a surface:

the ability to create a ceiling of several levels, which will be perfectly matched to the walls;
all electrical wiring will be hidden under the finishing, no unnecessary details that could spoil the appearance of the room;
you can forget about repairing the top of the room for 15-20 years - wear will be very slow;
the ability to combine materials will allow you to create an exclusive designer ceiling.

The price of finishing, of course, will be quite high, but the result and the updated interior will bring true moral satisfaction.

Mirrored and glass ceilings - a bathroom in all its glory

A relatively new finishing option is mirror and glass slabs. When installing this option, small rooms will immediately be transformed and will seem larger than their size. How to decorate a bathroom ceiling with mirrors? We must immediately warn you that without professional knowledge and experience it is almost impossible to install reflective plates, so you will have to turn to specialists. The ceiling will need additional strengthening to support a decent weight of the material.

But we can stop at this decision because:

the mirror surface looks grandiose and impressive, and few people have such a finish; it is quite rare;
you can save on lamps - the coating reflects light, spreading it throughout the room;
The atmosphere in the bathroom will become magical and cozy.

The main difficulty after installing a glass ceiling is caring for it. The surface will constantly fog up, and droplets of water will leave unsightly stains. Therefore, you will have to clean upstairs quite often.

Stretch ceiling - a popular modern option

If you answer the question of which ceilings are best for a bathroom, then the tension covering definitely holds the lead. It's all about its properties that protect against possible flooding - water on such a surface is not scary.

What are the advantages of a stretch ceiling?

the material is able to retain up to a hundredweight of liquid, protecting the floor, walls and household appliances - the water can then simply be drained, and the coating will take its previous shape;
the suspended ceiling is environmentally friendly and does not emit harmful fumes into the air;
plain, patterned, glossy, matte shades and even photo coatings - you can adapt them to any interior.

In the case of a suspended ceiling, just like with a mirror (glass) ceiling, you cannot do without the services of specialists. The surface will also need to be protected from sharp objects, as it is easily damaged.

In conclusion, we can say that any type of ceiling has its own advantages and disadvantages. You will have to make a choice based on your own aesthetic tastes and the characteristics of the bathroom.

According to many designers, a bathroom is a difficult object to design, especially if it is located in a small apartment. The difficulty lies in the high humidity of this room and, accordingly, the selection of suitable materials. Numerous questions arise: “Which ceiling is better to make in the bathroom? What should the floor be like? How to treat the walls? In this article we will try to figure out the first question, and also introduce you to finishing materials for bathroom ceilings. Perhaps this will help you make your choice.

Bathroom ceiling - basic requirements

Of the currently existing methods of finishing the ceiling, not every one is suitable for the bathroom. The fact is that in this room there are increased requirements for the coating:

moisture resistance;
resistance to high temperatures;
aesthetics;
protection against mold, mildew, condensation;
corrosion protection;
reasonable price.

As you can see, there are not so few requirements. How to make a bathroom ceiling so that it meets all these characteristics? Is there such a universal material that meets absolutely all requirements?

Whitewash

Let's start our review with the most affordable method, which was used by our grandmothers. And they were extremely pleased with it (perhaps because they did not know any better). Unfortunately, it can hardly be called durable. Ceiling repairs must be done every year, but do not forget that with each new whitewash the chalky layer will increase, which will need to be cleaned off regularly. Whitewashing is more suitable for dry rooms; humidity is contraindicated for it.

Painting

Another economical option. However, it is not as simple as it might seem. It requires certain finishing skills and dexterity. The problem is that you can paint the ceiling only if the surface is perfectly flat. Therefore, the preparatory work (surface cleaning, correction of defects, putty, primer) must be done professionally.

You need to know that high-quality water-based acrylic paint is suitable for the bathroom. Only in this case will the coating serve you for a long time. Such paints are not afraid of moisture, dry quickly, and often contain substances that reliably protect against fungus and mold. For example, moisture-resistant paint Worker Superweiss, which allows you to treat even heavily soiled surfaces. Its price is 819 rubles per five kilograms. Paint consumption - 150 ml/m2.

Plastic ceiling in the bathroom

This is a fairly common method that allows you to beautifully and efficiently decorate the ceiling in the bathroom. Today, plastic panels are produced in a wide range, are not very expensive, and have a huge color palette.

If you are thinking about which ceiling is best for the bathroom, then this is a completely worthy option. The panels are easy to clean, are not afraid of moisture, and installation is easy and simple. You can insert lamps into such a ceiling. Plus, he looks quite attractive. The latest hit is mirror panels.

On average, the cost of plastic panels is from 180 to 200 rubles/m2, their installation will cost 300 rubles/m2.

Dropped ceilings

If you dream that your bathroom will be not only practical, but also original, then we advise you to pay attention to more modern, but also more expensive types of design. These include a suspended ceiling in the bathroom - tiled, slatted, glass, metal, mirror, etc. It should be borne in mind that such structures reduce the height of the room, so they should not be installed in rooms with low ceilings.

We use mineral slabs

An original solution could be a suspended ceiling in the bathroom made of mineral slabs. Their main component is clay, which tolerates moisture well. However, it is necessary to choose waterproof slabs. This material can withstand humidity up to 100%. Even if you are seriously “flooded” by your neighbors, he will not be harmed.

If futuristic styles are closer to you, then mineral slabs can be replaced with metal ones. Their main advantage is their high strength; they are not so easy to damage. Disadvantages include a poor color range, as well as the formation of condensation on their surface.

You can use plasterboard boards. Today, many manufacturers offer special moisture-resistant material for bathrooms. Such sheets are easy to install, precisely adjusted to size, without joints or seams.

Slatted ceiling in the bathroom

Today this type of ceiling is especially popular. They are usually made of steel or aluminum. Their color range exceeds 50 shades. They are durable, strong, environmentally friendly. The slats do not rust and do not absorb moisture. The slatted ceiling in the bathroom may have joints with intermediate inserts. It can be of any shape, but it “eats” only three centimeters of height.

Stretch ceiling

This is the only type of finishing with which you can actually achieve an absolutely flat surface over the entire area. It is made from a special vinyl-based material. A suspended ceiling in the bathroom is not so cheap, but the costs will be fully justified. This design will give the room a modern and stylish look. In addition, mold does not appear on such a ceiling and microorganisms do not multiply. A suspended ceiling in a bathroom is also good because condensation does not collect on it. The ceiling canvas can withstand high temperatures (up to +50 degrees) and does not deform.

Stretch ceilings have another unique feature - they can withstand up to one hundred liters of water. Therefore, you will not be afraid of floods from the upper floors. In this case, you will need to call the installers who installed the ceiling. They will drain the water and dry the coating. It is important that this is a free procedure.

Variety of suspended ceilings

A wealth of textures and a variety of colors distinguish this type of ceiling covering. If your bathroom is too small, you can visually expand it with glossy ceilings. Satin and matte canvases at first glance resemble a whitewashed surface. Which bathroom ceiling is preferable? It depends only on your taste and the overall interior of the room. By the way, quite often glossy and matte canvases are combined.

Mirror ceilings

When you are wondering which ceiling is best for the bathroom, consider this very effective and stylish option. With such a ceiling, even the most ordinary small bathroom will become much more attractive, it will simply be transformed. Mirror panels make it possible to create sophisticated, even exclusive compositions. The color range of this material is varied - bronze, malachite, steel, pink and other colors. A combination of them is possible.

In any room, including the bathroom, mirrors visually expand the space. Therefore, we can confidently say that this is an ideal option for a small bathroom. Mirror plates are aesthetically pleasing, moisture resistant, and easy to install. This surface provides light reflection. It is not difficult to care for such a ceiling. All you need is a soft cloth and a special cleaner for mirrors or glass.

Glass ceiling

When discussing the topic of what kind of ceiling to make in the bathroom, it would not be fair to ignore the original glass ceiling. This is a practical and very beautiful solution that has a number of advantages. As you know, glass is not at all afraid of moisture and high temperatures. Condensation can be easily cleaned with a soft cloth. Bacteria do not multiply on such a surface, mold does not appear, and it is completely safe for humans. If necessary, damaged slabs can be easily replaced with new ones.

Glass, like a mirror, thanks to its optical properties, significantly expands space. And if you add to this a properly thought-out lighting system, the result is an atmosphere of lightness and airiness in the room.

Using frosted and transparent glass, professional craftsmen create real works of art. Often photo printing or stained glass is applied to glass. With a little imagination, you can make even a very modest-sized room amazingly beautiful.

Ceilings in the bathroom - reviews

Based on the fact that people spend quite a long time thinking about the idea of creating a bathroom interior, they are usually satisfied with the result. It makes no sense to say that mirrored and glass ceilings bring people into indescribable delight. Many people say that they expected their bathroom to “become prettier”, but they could not even imagine such an effect.

Those people who made a plasterboard ceiling in their bathroom are also pleased with their new acquisition. They believe that it is well worth the money spent and does not cause any hassle in maintenance.

The slatted ceilings also received positive feedback. Bathroom owners believe that such a ceiling makes the room more stylish.

Most consumers prefer ceilings made of plastic panels. In their opinion, they are most suitable for such a room. Attracted by the affordable price and ease of care. In addition, it is important that such a ceiling can be made with your own hands.

Stretch ceilings receive different reviews. The majority of customers are very pleased with the appearance of such structures, but note their high price and the impossibility of self-installation.

In conclusion, I would like to say that we do not have an answer to the question that interests you, which ceiling is better to make in the bathroom. It is up to you to answer it. We have only presented you with possible options. And now it’s your turn - use your imagination, don’t skimp if possible, because this is your home and your bathroom, in which you spend a lot of time.

Which is better to make a ceiling in the bathroom? Let's consider which ceiling for a bathroom is better, taking into account the specifics of this room.

Of course, due to high humidity, a wooden ceiling is not used in the bathroom.

How different types of bathroom ceilings are suitable for use in a bathroom?

Painting and puttying the ceiling

A fairly simple and relatively inexpensive option. Puttying material and paint do not cost very much, and performing this work does not require special professionalism. However, this option is beneficial only when the base is quite flat - in this case, puttying and leveling the base will not be necessary. At the same time, it is necessary to take into account that all materials used - paint, putty, and primer must be waterproof. If there are significant differences between the ceiling slabs, leveling the ceiling with putty will be a rather labor-intensive process, so other options in this situation will be more preferable.

Disadvantages of this method:

Painted ceilings in bathrooms look unoriginal, but you can use your imagination and combine 2 or 3 colors, creating a bold combination.
A painted ceiling lasts on average only 10 years (and that’s provided that the neighbors above don’t flood it).
Although caring for such a ceiling is not difficult, the darkening (over time) cannot be washed off, since the paint tends to absorb dirt. However, it will not be difficult to refresh the ceiling - you can simply go over it again with a brush or roller so that the surface shines clean again.
It will be impossible to create built-in lighting, no matter how much you want, because there is simply nowhere to insert it. But you can install aesthetic pendant lights to decorate the room. But it will be impossible for them to hide communications.
It is painted ceilings that most often attract mold and mildew.

Thus, in practical terms, these bathroom ceilings can be considered one of the worst.

PVC panels - easy and inexpensive

When thinking about what to make a bathroom ceiling from, many people choose. Their advantages are absolute moisture resistance and high strength. Their installation does not require special skills, they look quite beautiful and do not require additional finishing. The surface of these panels does not require special care; you just need to periodically wipe it with a damp cloth. You can insert spotlights into such a ceiling.

Disadvantages of these designs:

The joints of the panels have seams into which dirt gradually penetrates. This looks unsightly, but is eliminated with periodic cleaning. If the ventilation in the bathroom is poor, fungus penetrates into the cracks, which is much more difficult to remove than dirt.
The frame may rust over time. Sometimes even the galvanized coating on it turns out to be powerless. However, this happens mainly in case of poor ventilation and high humidity in the room.
Updating such a ceiling can hardly be called a quick and easy process. It is necessary to completely remove the old plastic and then install a new ceiling covering.

Slatted ceiling - durable and stylish

Slatted ceilings for bathrooms are also assembled on frames. The rail is a long narrow panel made of plastic, aluminum or steel. Aluminum should be considered the best material - it is absolutely waterproof and does not corrode. The slatted ceiling can be painted in different colors, since chrome-plated, gold-plated, single-color slats, as well as slats with a pattern are available. Their installation does not require special skills; they are assembled according to the principle of a designer. Caring for them is quite simple. Therefore, when choosing which ceiling is best for the bathroom, a significant part of consumers opt for the slatted option.

The flexibility of the slats makes their installation extremely convenient. Therefore, such a ceiling can be made curved. Also, the polished surface of the slats has reflective properties, thanks to which the ceiling made from them looks almost like a mirror. However, some ceiling tiles also have a similar property.

Disadvantages of a slatted ceiling:

Interpanel seams become clogged with dirt. Clean seams are generally invisible, but their contamination leads to the appearance of untidy dark stripes. Although this problem is not difficult to solve - you just need to clean the ceiling from time to time.
A slatted ceiling is not suitable for all interior styles, so it will not have a harmonious look in every bathroom.

This design is made on a metal frame. After installing the frame, it is “sewn up” with plasterboard sheets that are moisture resistant and contain protective additives against moisture and fungus. In order to avoid mistakes when purchasing, you should pay attention to the marking, which should contain the inscription “GKLV” (moisture-resistant plasterboard sheet). The leaf color is usually green. This should be considered “correct”; it will not become damp, crumble or rot.

Such ceilings make it possible to decorate a bathroom in an original way (in the good sense of the word). You can make them multi-level, and also experiment with the location of the lamps built into the frame. By hiding all the imperfections of the ceiling, wires and ventilation communications, you will be able to get a durable and beautiful ceiling. Its service life will be 5-10 years.

Disadvantages of a plasterboard ceiling for a bathroom:

Expensive installation. It is necessary to make a frame, secure the sheets, then apply putty, then primer, and then paint.
When installing such a ceiling yourself, it also turns out to be very costly in terms of effort and time spent.
The paint coating must be periodically refreshed, as it will lose its appearance. Absorption of dirt is also inevitable over time. But the structure itself will not need repair or replacement.

On the same frame as plasterboard, it is possible to construct a ceiling from finished cladding sheets, which are also called suspended ceiling tiles. The result will be cellular or. Unlike a plasterboard ceiling, it does not require priming or painting - this is the main answer to the question “what is better than a tiled ceiling compared to others?” The surface of each slab has already been processed. Plates can be made of different materials - metal, plastic, plexiglass. Mineral slabs are also used. Illumination gives such structures a very beautiful, slightly magical look.

Disadvantages of a suspended tile ceiling in the bathroom:

It does not always suit interior design. He often looks too cold and official. However, for high-tech and minimalist styles such a ceiling is ideal.

This ceiling option has a simply chic appearance. However, it is very expensive. This should be taken into account when choosing which ceiling to install in the bathroom. The frame will need to be reinforced metal (similar to a frame for drywall). To attach the mirrors to the frame, holes are drilled in each mirror. To assemble such a ceiling, some experience is required, but its service life will be long. requires careful care - polishing and rubbing.

Budget mirror ceilings for bathrooms with a much lower cost are also known. For example, you can mount shiny, lightweight plastic panels using the Armstrong system. These beautiful bathroom ceilings are easy and quick to install, even without special skills. But the frame in this case is characterized by instability to corrosion, which will eat it up quite quickly.

Disadvantages of a mirror ceiling in the bathroom:

A mirrored ceiling creates a strong shine, which not everyone likes, especially when the ceiling is low, installed in a small bathroom, and you have to stay in it for a long time.
The mirror surface requires the same care as a regular mirror. However, if ordinary mirrors are located vertically, then a mirrored ceiling is located horizontally and therefore implies more difficult maintenance, which should be remembered when deciding how to make a ceiling in the bathroom.

PVC stretch ceiling - absolutely waterproof

This is a good option for a bathroom - such a ceiling will not get damp, it protects the home from flooding. If you pour even 100 kg of water per square meter onto such a ceiling, nothing will happen. Specialists will be able to drain the water and stretch the ceiling again. His qualities will not change. Caring for such ceilings involves wiping them with a damp, wrung out cloth.

In addition, they look harmonious in any interior. They have a modern, sophisticated and noble look and are available in a wide variety of designs. There are PVC ceilings, shiny and matte, plain and with patterns, with convex patterns and photo printing. Therefore, a PVC ceiling is better than all other options. You can choose a ceiling to suit every taste.

Disadvantages of PVC suspended ceilings for the bathroom:

Installation of such a structure requires professionalism, special equipment and materials.
It is quite easy to make holes in such a ceiling, after which its ability to retain water will disappear. Therefore, care is required; you must not touch the PVC film with hard objects.
If such a ceiling is white, it may turn yellow in the places where the lamps are installed. These yellow spots cannot be wiped off or painted over. Therefore, if this happens, you will have to completely replace the ceiling system fabric.

Which ceilings are best for a bathroom in terms of design?

First, you should think about how the new ceiling installed in the bathroom will fit with the interior of the home. A “classic” is the snow-white ceiling. It can be a tensile structure, or plasterboard, or hemmed, or suspended, with or without built-in lamps. The smooth, even surface of white color fits well into everyone. The combination of a white ceiling with a black floor (sometimes also walls) looks most luxurious.

Using textured ceilings for the bathroom, you can “play” with the size of the bathroom, making it visually larger (if there is little space in it) or smaller. Such opportunities are created by modular, slatted, tiled and cellular ceilings. They have a pronounced texture of tiles or planks.

If the bathroom area is large, multi-level ceilings can be used. The most economical option in this case will be a plasterboard ceiling. For example, a convex round design with lamps installed in a bathroom, which also has a round shape, looks good.

Which bathroom ceilings are better in practical terms?

In this regard, the best are ceilings made of PVC panels and suspended ceilings. The latter are generally ideal for bathrooms, so they are in great demand. Waterproof PVC film is also very practical.

Video about which ceiling is better to make in the bathroom

The bathroom has its own microclimate, which differs from other rooms in high humidity and temperature changes. This circumstance should be taken into account when choosing finishing materials. Below we will look at successful and unsuccessful types of ceilings for the bathroom and dwell in more detail on some of them.

We will talk about those types of coatings that are not friendly with the humid air of the bathroom. And then we will consider in more detail the suitable materials - their types, costs, advantages and installation features.

Requirements for finishing wet rooms

In addition to the fact that the bathroom is a room that is constantly exposed to water and steam, it can also be flooded by neighbors from above at any time. In addition, it is subject to more dramatic temperature changes. That is why the answer to the question of which ceilings are best for a bathroom requires detailed explanations.

Unsuitable bathroom coatings

So, first, let's talk about what kind of ceiling you should not make in the bathroom.

Here is a list of not very good options:

Whitewashing with lime. This type of coating was very popular in the recent past. But there are many better options available these days, many of which don't cost much more and yet look much better and last longer. Lime quickly acquires a yellowish tint. As a result, it needs to be washed off and whitened again periodically. And this is a waste of time and money.
Whitewashing with chalk. This method of treating the ceiling has the same disadvantages as lime whitewashing, but in addition to them, mold can settle on the chalk surface. This is a completely unsuitable material for a bathroom.
Oil paint or enamel. These types of paints, when exposed to moisture, begin to crack, peel and crumble.
Wallpapering. The glue that holds the wallpaper becomes saturated with moisture and ceases to perform its function. As a result, the coating simply falls off.
Suspended ceiling made of materials vulnerable to moisture. These include plasterboard, chipboard, fiberboard. Such a ceiling will not only quickly deform and become unusable, but will also require complete replacement if you are flooded from above.

Reliable materials for bathroom ceilings

Let us now dwell on those materials that are not sensitive to moist air. Modern industry offers a wide variety of bathroom ceiling options that have practicality and high aesthetic qualities. All you have to do is choose from the entire range of possibilities the material that suits you best in terms of price and appearance.

Water-based or latex ceiling paint

Painting allows you to beautifully decorate the ceiling without reducing the height of the room. In addition to enamel and oil paint, which, as already mentioned, are not suitable for the bathroom, there are more modern compositions, for example. They not only do not lose their properties under the influence of humidity and temperature changes, but also remain invulnerable to mold.

Painting work is not complicated, it does not require special professional skills:

Finishing with expanded polystyrene boards

Practical, easy to install material. A great example of which bathroom ceiling is better and cheaper than whitewashing. Expanded polystyrene tiles fit especially well into classic interiors. The main advantage of the material is that it requires a minimum of time and effort to arrange the ceiling. The tiles are simply glued to the concrete surface using liquid nails or universal glue. There is no need to level the ceiling.

Ceiling made of plastic panels

This type of covering is the simplest option for a suspended ceiling. Unlike previous options, this design requires a frame, as a result of which the height of the room is slightly reduced.

Installation of such a ceiling consists of several stages:

Magnesium glass sheet ceiling

Glass-magnesium sheet (abbreviated as SML) began to be used in interior decoration quite recently. If you are considering bathroom ceiling options, we recommend that you pay attention to this material. It resembles drywall, but differs favorably from it by being more flexible, durable and easy to install.

LSU does not transmit or absorb moisture, which means it is excellent for finishing bathrooms and bathrooms. This covering, like any suspended structure, requires the creation of a frame. Installation of glass-magnesium sheet is similar to the technology for installing a plasterboard ceiling. In this case, the frame must be designed to withstand a greater load than when using plastic panels.

After installation, this material is puttied and painted. The advantage over conventional ceiling painting is the ability to integrate lamps into the suspended structure.

Cassette ceilings

The main advantage of slatted and cassette aluminum structures is the ability to easily install such a ceiling with your own hands without the involvement of professionals. Only the installation of the frame can be considered a relatively difficult stage of work. The panels themselves are simply snapped between the guide rails. The result is a durable and beautiful coating without cracks.

The frame system of such ceilings is often made open. In this case, the frame slats become part of the decor. If you choose a closed option, then the metal cassettes are installed on the frame using fasteners.

How to assemble a frame for a suspended ceiling, see details in the video:

Stretch ceiling

Many apartment owners are sure that no type of ceiling in the bathroom can compare with a tension surface. It's hard to argue with that. Stretch ceilings are durable, reliable, beautiful and easy to maintain.

Well, their main advantage is that in the event of flooding by neighbors, neither the bathroom interior nor the ceiling itself will be damaged. To eliminate the consequences of a leak, it will be enough to simply release the water that has accumulated under the canvas.

Conclusion

You have become familiar with the various options for arranging ceilings in the bathroom, the advantages and features of different materials. We hope this article will help you make your choice.

When renovating a bathroom, you also need to change the ceiling covering. But in such a specific room, certain requirements are imposed on the ceiling. And the question naturally arises, what kind of ceiling is best to make in the bathroom so that it is aesthetic and practical, that is, combined with the interior of the room, but at the same time so that it is easy to care for. Let's try to understand this difficult issue.

What should the ceiling be like in the bathroom?

The bathroom ceiling requires special attention, as it is a room with high humidity. Let's consider the basic requirements for the ceiling covering in a room with constant dampness:

The finishing material must be moisture-resistant, since in this room the ceiling is exposed to moisture both from above (flooding by neighbors, leaks) and from below (steam, condensation, shower splashes). A good ceiling should withstand all exposure to moisture.
Ease of care is another important requirement. The better and easier it is to care for a surface, the more popular it is. The ideal option would be to wipe it periodically, because in this room, as a rule, there is very little free space for “maneuvers” during cleaning.
Aesthetic requirements are also important for the bathroom. The ceiling in the bathroom should be made in accordance with the overall interior design of the room. It should be pleasant to look up while taking a bath or shower.

In addition, the material for the bathroom ceiling must be durable, environmentally friendly, fire-resistant, antibacterial, easy to install and have an affordable price.

Since we have listed the basic requirements for the ceiling in the bathroom, we can proceed directly to considering one or another type of ceiling covering. There are many options for ceiling design, but not all materials and types of finishing meet the listed requirements.

Painting a putty ceiling

Puttying and painting the ceiling with water-based paint is a simple, cheap and stylish finishing option. To make it original, it is better to paint the surface in several colors in a variety of bold combinations. If there is no flooding from neighbors, such a ceiling will last about 10 years.

At the same time, all materials (putty, primer, paint) must be waterproof and antibacterial, and the surface for touch-up must be perfectly flat. If there are large differences between the floor slabs on the ceiling, then leveling the surface with putty will require a lot of effort and financial investment. Then it is better to make the ceiling in the bathroom from other materials.

This option has other significant disadvantages:

It is easy to care for a painted ceiling, but the darkening that has formed over time cannot be removed, since the paint absorbs dirt very quickly. But you can very easily refresh the coating by running a paint roller over the old coating, and the ceiling will shine again.
It is very difficult for putty to resist fungi and mold, which is why you need to choose high-quality products with an antibacterial effect. But this does not guarantee that harmful microorganisms will not appear on the ceiling in the bathroom, since constant dampness is ideal conditions for their development.
With this finishing option it is impossible to create built-in lighting, which is so popular today. It is also impossible to hide some communications under putty.

However, the low cost and simplicity of this method force many people to choose this particular type of ceiling surface finishing.

Ceiling made of plastic panels

PVC panels are another cheap, but at the same time aesthetic and practical way to finish the ceiling in the bathroom. This is a durable, lightweight and moisture-resistant coating that is easy to install and does not require additional finishing. Plastic panels do not require special care; periodic wiping with a damp cloth is sufficient. An important advantage of such a ceiling is the ability to install spotlights.

However, plastic siding also has disadvantages:

Dirt gets into the seams at the joints of the panels, which will need to be cleaned occasionally with a brush.
If there is poor ventilation in the room, fungus can settle in the seams, which is very difficult to remove. Therefore, it is necessary to periodically treat the PVC surface, especially the seams, with chlorine-containing detergents.
Over time, in high humidity, even a galvanized metal frame can corrode. But the panel ceiling will definitely serve faithfully for 15 years.

To update the coating, you will have to completely dismantle the old panels and ceiling skirting boards, and then reinstall new PVC panels.

Ceramic tiles look great on the ceiling

Until recently, when asked what is the best way to make a bathroom ceiling, many answered that ceramic tiles are high-quality, beautiful and practical, and they were absolutely right. The tiles on the ceiling really look expensive, stylish and have a number of other advantages over many other ceiling coverings:

tile is one of the most durable facing materials;
the tiles are safe for human health, as they do not emit toxic substances;
ceramics perfectly withstand moisture, are frost-resistant, do not burn, are hygienic, and wear-resistant;
the tiles are very easy to maintain and are not subject to destruction from the most aggressive chemical detergents;
ceramic tiles do not fade in the sun over time;
has a huge range of colors, sizes and structures.

Tile could be called the best option for finishing the ceiling in the bathroom, if not for two significant disadvantages:

Impossibility of installing built-in lighting.
The tiles are very difficult to install on the ceiling.

Therefore, to cover the surface you will have to use the services of a professional, and instead of spot lighting, install wall sconces.

Features of the rack type ceiling

The slatted ceiling, like PVC panels, is assembled on a frame. However, slats can be not only plastic, but also metal (aluminum or steel). Aluminum slats are much lighter than steel slats and do not rust. The slatted ceiling can be made in various colors, since narrow long panels are available in chrome, gold plated, patterned or plain.

Even a beginner can assemble a slatted ceiling. During installation, the slats are very flexible, which allows you to make the ceiling curved or even multi-level. The surface of the slats is carefully polished, almost like a mirror, and therefore has reflective properties. In addition, it is very easy to care for such a surface.

Of course, there are also disadvantages to ceiling slats:

1. Even with light contamination of the interpanel seams, untidy stripes of a dark shade are formed.
2. This is a rather specific finishing material that is not suitable for every interior design style.

Tiled suspended ceiling

On such a frame, you can make a ceiling from ready-made facing sheets - hanging tiles. The result is a ceiling surface of a cellular or cassette type. Such a surface does not require priming or painting, which is a big advantage, since ceiling tiles are created with an already treated surface in a variety of variations.

Suspended slabs are made from various moisture-resistant materials: plexiglass, plastic, metal, mineral modules. With lighting, such designs look simply great. Ideal for minimalism and high-tech style in the interior.

However, ceilings of this type do not fit organically into all interior design styles. Sometimes hanging tiles look too formal and cold, which is unacceptable for the relaxing atmosphere of the bathroom.

Ceiling made of plasterboard sheets

The plasterboard structure is assembled on a metal or wooden frame. After installing the frame, it is covered with sheets of moisture-resistant plasterboard, which contains various protective additives against excess moisture and fungus. “Proper” drywall, when exposed to moisture, will not become damp, rot or crumble.

Plasterboard structures allow you to create an original bathroom. After all, such a ceiling can be made multi-level and winding, as well as spotlights built into the frame can be beautifully and unusually positioned. In addition, this coating allows you to hide wires, pipes and ventilation communications, as well as unevenness and flaws in the ceiling, creating a flat, smooth and durable surface.

There are also disadvantages, among which are:

Relatively short service life - from 7 to 10 years.
Expensive materials (profiles, screws, sheets of drywall, putty, primer, paint).
The need to periodically refresh the outer layer by repainting the surface.

But during repairs there is no need to build a new frame.

Stretch ceiling - beautiful and practical

Stretch ceilings are very popular today, because they are an excellent option for the bathroom. This coating will protect against flooding, will not become damp, and will not lose its properties. This ceiling will easily fit into any interior, creating a modern, stylish and sophisticated design for every taste.

Stretch ceilings have a large number of color and design options, including multi-level designs with many built-in lamps. Stretch ceilings come in glossy and matte, plain and patterned, with convex patterns and 3D photo printing. Caring for such a surface involves periodically wiping it with a well-wrung out damp cloth.

Now about the disadvantages of using this finish in the bathroom:

Impossibility of self-installation.
Easily damaged by hard and sharp objects.
Yellowing may occur in areas where spotlights are installed.

In all other respects, suspended ceilings are significantly superior to other types of cladding.

Mirror ceiling will increase the space

When using real mirrors, the appearance of the ceiling is simply amazing in its luxury. But the cost of such beauty is very significant. The frame for such a structure is made of metal, reinforced (the same is used for attaching drywall). To mount the mirrors on the frame, holes are drilled in each.

It is better to entrust the assembly of such a ceiling to a person with experience in such work, but the service life of such a ceiling will be quite long. Such a ceiling requires careful care; it must be thoroughly rubbed and the surface polished to a shine.

But there are also more affordable options for a mirror-type bathroom ceiling - their price is much lower. For example, lightweight, shiny plastic panels are perfect, installing them using the Armstrong system. Installation is quite simple and easy, and even a novice amateur can cope with this task. But this system has a very weak frame; it is very sensitive to corrosion, which undermines it in a very short time.

Disadvantages of mirrored ceilings in bathrooms:

This type of ceiling creates a lot of shine, which not everyone likes, especially if you stay in the room for a long time and the ceiling is not very high.
Another disadvantage is maintenance, since the surface is mirrored, the problems will be the same as with a regular mirror. Maintenance is further complicated by the fact that, unlike a regular mirror, the ceiling is located not vertically, but horizontally and above your head.

Original glass ceiling

Having also touched on the topic of ceilings for the bathroom, one cannot help but recall this type of glass ceiling. Such ceilings have a number of significant advantages and disadvantages. Glass is not afraid of moisture, splashes and high temperatures, and is easy to clean. Glass ceilings are 100% environmentally friendly - there is never mold on them, and bacteria do not multiply, glass does not contain or emit toxic substances. Exposure to aggressive environments has no effect on them. If necessary, damaged slabs can be easily replaced.

Due to its optical properties, glass visually enlarges the space, and well-chosen light will create a mood of mystery and intimacy, lightness and airiness. A glass ceiling with stained glass or photo printing is a very original solution.

For the ceiling in the bathroom, you can use both frosted and glossy glass with varying degrees of transparency. You can make a ceiling using photo printing in the form of stained glass. You just have to use your imagination a little and your bathroom will be significantly transformed, acquiring an amazing look and significant volume.

Vinyl wallpaper - stylish and cheap

To decorate the bathroom ceiling, you can use vinyl wallpaper; thanks to the outer synthetic film, they are not afraid of moisture and water. Before gluing vinyl wallpaper, you need to prepare the surface well so that there are no defects, otherwise the ceiling will not look aesthetically pleasing and will spoil the appearance.

There should be no gaps between the joints, as this can cause fungus to spread over the entire surface of the ceiling. If necessary, the wallpaper can be repainted several times.

Which option should I choose?

from a design point of view

As we said above, first think about how the design of your ceiling and the entire bathroom will be in harmony with the rest of the apartment’s interior. For example, “classic” is a snow-white version. Moreover, it can be either hemmed or plasterboard, tensioned or hanging, with built-in lamps or not. A smooth and even white surface (even if painted) is perfect for any interior. A special chic is a white ceiling and a black floor (and sometimes walls), such a contrast looks very attractive.

When using textured ceilings, you can “play” with the size of the bathroom, visually making it wider, higher or lower. These include modular, tile, cellular and rack-type structures. All these types of ceilings have a pronounced texture of planks or tiles.

If you have a large bathroom, you can use multi-level ceilings; it is easier and cheaper to make them from plasterboard. A round convex design with lamps above a round bathtub will look great.

from a practical point of view

If you look at which ceiling is best to make in the bathroom from the practicality side, then stretch ceilings and ceilings made of PVC panels definitely share the first place. Many people choose a suspended ceiling in the bathroom. Thin, but very beautiful and waterproof PVC film is both practical and looks very nice.

In conclusion, we can say that whatever type of ceiling you choose, the most important thing is that it meets your requirements. We have covered all the types that could be suitable for a bathroom. But you should not save money and should give free rein to your imagination for the bathroom, and then every day you will be happy to enter this beautiful room.